2103REGES - KNX Devices Energy detector, 3-gang, for rail mounting Rail mounting device, 4 rail units ETS product family: Physical sensors Product type: Energy detector - Quad Industry GmbH

Артикул: 2103REGES Наименование: KNX Devices Energy detector, 3-gang, for rail mounting Rail mounting device, 4 rail units ETS product family: Physical sensors Product type: Energy detector Производитель: JUNG KNX Devices Energy detector, 3-gang, for rail mounting Rail mounting device, 4 rail units ETS product family: Physical sensors Product type: Energy detector Product characteristics The energy detector has three channels for connecting loads to up to three separate phases with a common neutral conductor. Each channel can measure: *     Voltage (eff.) *     Current (eff.) *     Active power *     Reactive power Additionally, the active power and reactive power of all channels will be summed up and displayed as three-phase power values along with the mains frequency. According to the parameterisation the measured values will be transmitted on the KNX bus, either cyclically and / or when the value changes. An additional telegram will be transmitted if certain values exceed or fall below a specified limit. The following meters exist for each channel and for the three-phase values: *     1 x energy meter total *     1 x energy meter ? h value *     3 x energy meter n *     3 x energy intermediate meter n New in version 01: *     Direct measurement (without transformer) *     Transformer measurement (with external 75 A transformer, ratio 75:5, e.g. Phoenix Contact order key 2277611) Technical data Power supply via E1/N Rated voltage: AC 110 ... 240 V ~ Mains frequency: 50 / 60 Hz Power consumption: max. 2 W Inputs E1 ... E3 Rated voltage range: AC 85 ... 265 V ~ Rated current range: 4 mA ... 16 A Rated frequency: 50 / 60 Hz Measurands: voltage (rms value) current (rms value) frequency active power (signed +/-) reactive power (signed +/-) active energy (signed +/-) External transformer Transformation ratio: 75:5 Secondary current: 0 ... 5 A Accuracy: Direct measurement (without transformer): 1 % of 200 mA ... 16 A Transformer measurement (75 A transformer, class 1): 2 % of 7.5 A ... 75 A Pulses LED: Direct measurement (without transformer): 6400 / kWh Transformer measurement (75 A transformer): 427 / kWh Pulse duration: 4.9 ms Power loss Voltage measurement: ? 0.03 W / phase Current measurement: ? 0.8 W / phase Power consumption from mains: < 1 W Connection: screw terminals single wire: 0.5 ... 2.5 mm2 stranded without ferrule: 0.5 ... 2.5 mm2 stranded with ferrule: 0.5 ... 2.5 mm2 Ambient temperature: ?5 ... +45 °C Storage/transport temperature: ?25 ... +70 °C Mounting width: 72 mm (4 rail units) KNX medium: TP 256 Rated voltage KNX: DC 21 ... 32 V SELV Current consumption KNX: max. 5 mA Connection, KNX: terminal Manufacturer: JUNG Ref.-no.: 2103 REG ES

Назад в раздел