1240STE - Push-button controller for dimming of fluorescent lamps controlled by electronic ballasts or TRONIC transformers with control voltage 1 – 10 V - Quad Industry GmbH

Артикул: 1240STE Наименование: Push-button controller for dimming of fluorescent lamps controlled by electronic ballasts or TRONIC transformers with control voltage 1 – 10 V Производитель: JUNG Push-button controller for dimming of fluorescent lamps controlled by electronic ballasts or TRONIC transformers with control voltage 1 – 10 V Intended use *     Switching and brightness setting for luminaires with 1-10 V interface *     Installation in appliance box according to DIN 49073 *     Operation with suitable cover Product characteristics *     The light bulb is switched on and off via the load cable and dimmed via the 1-10 V interface *     Switch-on brightness can be saved permanently *     Basic brightness can be saved permanently *     Connection of extensions possible *     The 1-10 V interface is short-circuit proof for the control current Connection of satellite units (combinations possible): Satellite insert "2-wire", ref.-no.: 1220 NE Centre plate (ref.-no.: ..1561.07..) has same functionality as on standard touch dimmer insert Minimum brightness can not be adjusted Number of satellite units: unlimited Total length of satellite cables: max. 100 m Mechanical push-buttons (make contact, not illuminated) Short operation: On / Off Longer operation: dimming Number of satellite units: unlimited Total length of satellite cables: max. 100 m Note: Satellite operation is only possible, when a "cover" (centre plate, automatic switch or other suitable cover) is placed on the main unit. Illuminated mechanical push-buttons must have a separate N-terminal. The storage of the dimming value (memory function) is not possible with mechanical push-buttons. Satellite insert "3-wire", ref.-no.: 1223 NE in combination with automatic switch ref.-no.: ..1180.., ..1180-1.., ..1280.., ..1280-1.., presence detector ref.-no.: PMU 360 .. or ceiling automatic switch ref.-no.: DAW 360 .. The main unit must likewise be operated with an automatic switch, presence detector or ceiling automatic switch. Otherwise there is no function! Number of satellite units: max. 10 Total length of satellite cables: max. 100 m Technical data Rated voltage: AC 230 V ~, 50/60 Hz, neutral conductor required Connected load Incandescent lamps: 700 W Electronic ballast: depending on type Control voltage: 0.5 ... 10 V Control current: max. 50 mA Switch contact: relay, mains potential Ambient temperature: +5 ... +25 °C Connection: screw terminals Terminals for: 2 x 2.5 mm2 or 1 x 4 mm2 Manufacturer: JUNG Ref.-no.: 1240 STE

Назад в раздел