HOA2003-001 - HOA2003 Series Transmissive Optoschmitt Sensor, Transistor Output, Plastic Package || HOA2003-001 - Quad Industry GmbH
Артикул: HOA2003-001
Наименование: HOA2003 Series Transmissive Optoschmitt Sensor, Transistor Output, Plastic Package || HOA2003-001
Производитель: Honeywell
|
|
| Description | | The HOA2003 consists of an infrared emitting diode facing an Optoschmitt detector encased in a black thermoplastic housing. The photodetector consists of a photodiode, amplifier, voltage regulator, Schmitt trigger and an NPN output transistor with 10 kOhm (nominal) pull-up resistor. The buffer logic provides a high output when the optical path is clear, and a low output when the path is interrupted. The HOA2003 utilizes an IR transmissive polysulfone housing which features smooth optical faces without external aperture openings, this feature is desirable when aperture blockage from airborne contaminants is a possibility. The detector has a 0.010 in (0.254 mm) x 0.040 in (1.02 mm) vertical aperture which is ideal for use in applications in which maximum position resolution is desired. The HOA2003 employs plastic molded components. For additional component information see SEP8506 and SDP8600. Housing material is polysulfone. Housings are soluble in chlorinated hydrocarbons and ketones. Recommended cleaning agents are methanol and isopropanol. | | Features | - Direct TTL interface
- Buffer logic
- 0.010 in [2.54 mm] offset detector leads
- 0.125 in [3.18 mm] slot width
- Accurate position sensing
- Dust protective housing
|
|
| | Product Specifications | | Series Name | HOA2003 | | Product Type | IR Switch | | Output | 10 kOhm Pull-up | | Output Logic | Buffer | | Package Components | Plastic | | Continuous Forward Current | 50 mA | | Forward Voltage | 1.6 V | | Reverse Breakdown Voltage | 3 V | | Reverse Current | 10 µA | | Maximum Trigger Current | 20 mA | | Housing Material | Polyester | | Power Dissipation | 100 mW | | Operating Temperature | -40 °C to 70 °C [-40 °F to 158 °F] | | Collector-Emitter Saturation Voltage | 0.4 V | | Hysteresis (H) | 0.1 | | Operating Supply Voltage | 4.5 V to 10 V | | Supply Voltage | 12.0 Vdc | | High Level Output Voltage | 2.4 V minimum | | High Level Supply Current | 2.0 mA to 10 mA | | Low Level Output Voltage | 0.4 V maximum | | Low Level Supply Current | 4.0 mA to 12 mA | | Output Rise Time | 60 ns | | Output Fall Time | 15 ns | | Output Sink Current | 18 mA | | Propagation Delay Low-HighHigh-Low | 5.0 µs | | Duration of Output Short Vcc or Ground | 1.0 second | | IRED Trigger Current | 10 mA | | Comment | Output is LO when incident light intensity is above the turn-on threshold level. | | Availability | Global | | Sensor Aperture | 1,02 mm x 0,25 mm [0.040 in x 0.010 in] | | Slot Width | 3,18 mm [0.125 in] |
|
Назад в раздел
|
