060-1542-03G - Model S Subminiature, Flush Diaphragm Pressure Transducer, 100 psi to 15,000 psi, Flush-Mount Design, 17-4 PH Stainless Steel, Wetted Material, High Frequency, mV/V Output, 1 % Accuracy || 060-1542-03G - Quad Industry GmbH

Артикул: 060-1542-03G Наименование: Model S Subminiature, Flush Diaphragm Pressure Transducer, 100 psi to 15,000 psi, Flush-Mount Design, 17-4 PH Stainless Steel, Wetted Material, High Frequency, mV/V Output, 1 % Accuracy || 060-1542-03G Производитель: Honeywell Description Honeywell’s full line of subminiature pressure transducers accurately measure pressure ranges from 100 psi to 15000 psi. These gauge-only, subminiature pressure transducers have a high natural frequency and utilize a flush diaphragm that is manufactured from 17-4 PH stainless steel. Temperature compensation is accomplished by using temperature-sensitive components located inside the transducers. These transducers have a small electrical, zero balance circuit board that is in the lead wire (approximately 1 in x 0.087 in thick). This balance board does not have to be in the same temperature as the transducers. All transducers have four (4) active bonded strain gauges arranged in a Wheatstone-bridge configuration. Features 100 psi to 15000 psi range Flush mount design No internal dead volume High frequency mV/V output CE approved Potential Applications Engine and transmission test stands Fluid pump pressure Fuel line pressure and fuel/air ratio Brake assembly test Tire manufacturing mold pressure control Brake and accelerometer cable test Air bag system fill pressure Pressure brake testing, hydraulic sensor: Brake pedal forces, ABS pressures Well stimulation Coil tubing MWD Wellhead measurement Product Specifications Form Factor Compact and Miniature, Flush Order Code BP357CL,1A,2U,5E,6AM Pressure Range 200 psi Pressure Unit Gage Accuracy 1.0 % FS BFSL Non-linearity and Hysteresis 1.0 % FS Non-repeatability ±0.15 % FS Output 2 mV/V Resolution Infinite Media Gases, liquids compatible with wetted parts Temperature (Operating) -54 °C to 149 °C [-65 °F to 300 °F] Temperature (Compensated) 16 °C to 71 °C [60 °F to 160 °F] Temperature Effect (Zero) 0.01 % FS/°F Temperature Effect (Span) 0.02 % reading/°F Electrical Termination (std) Four twisted leads (1.83 m [5 ft]) with external balance board Mating Connector None Shunt Calibration Data Included Excitation (calibration) 5 Vdc Excitation (acceptable) Up to 5 Vdc or Vac Overload (safe) 50 % over capacity Overload (burst) 400 % full scale Wetted Parts Material 17-4 PH Stainless Steel Case Material Stainless Steel Weight 2 oz Dead Volume Flush Product Dimensions O12,7 mm 17,53 mm L [O0.50 in x 0.69 in L] Agency Approvals and Standards CE approved UNSPSC Code 41112110 UNSPSC Commodity 41112110 Pressure Transducer Availability Global Series Name S

Назад в раздел