060-0708-08TJG - Model TJE General Purpose, Gage/Absolute Pressure Transducer, 0.5 psig/a to 60,000 psig/a, 17-4 PH Stainless Steel, Wetted Material For Ranges Up to 2,000 psi and 15-5 PH Stainless Steel, Wetted Material For Ranges 2,000 psi and Greater, Hermetically Sealed, 0.10 % Accuracy, Intrinsically Safe Available || 060-0708-08TJG - Quad Industry GmbH

Артикул: 060-0708-08TJG Наименование: Model TJE General Purpose, Gage/Absolute Pressure Transducer, 0.5 psig/a to 60,000 psig/a, 17-4 PH Stainless Steel, Wetted Material For Ranges Up to 2,000 psi and 15-5 PH Stainless Steel, Wetted Material For Ranges 2,000 psi and Greater, Hermetically Sealed, 0.10 % Accuracy, Intrinsically Safe Available || 060-0708-08TJG Производитель: Honeywell Description Model TJE pressure transducers are all-welded stainless steel sensors built for rugged industrial applications that require high accuracy and measurement stability. The Model TJE is available with a variety of options for extended temperature operation, electrical terminations and high-level outputs including 5 Vdc or 10 Vdc and 4 mA to 20 mA. Most high-level output models have internal shunt calibration circuits as a standard feature to allow easy set-up of the sensor to the data system. An optional internal signature calibration chip provides calibration information for automatic set up with the Model SC four-or-twelve channel digital indicator. The gage Model TJE is a strain gage based transducer and features a unique “true gage” design which utilizes a second welded stainless steel diaphragm that hermetically seals the strain gage circuitry from atmospheric contamination. This design references the primary pressure sensing diaphragm to the atmosphere, and provides a stable zero regardless of the transducer environment. The absolute Model TJE has an all-welded vacuum reference chamber assuring long-term stability. Features 0.1 % accuracy 0.0025 % F.S./°F temperature effect 1 psig/a to 60000 psig/a range mV/V, 4 mA to 20 mA, 0 Vdc to 5 Vdc, or 0 Vdc to 10 Vdc output All-welded, stainless steel construction Intrinsically safe available (2N option only) CE Potential Applications Engine and transmission test stands Fluid pump pressure Fuel line pressure and fuel/air ratio Brake assembly test Air bag system fill pressure Pressure brake testing, hydraulic sensor: brake pedal forces, ABS pressures Hydraulic and pneumatic system monitoring Product Specifications Form Factor General Process, Foil - Pressure Order Code AP121BN,1A,2U,5B,6A Pressure Range 50 psi Pressure Unit Gage Accuracy ±0.10 %FS BFSL Linearity ±0.10 %FS BFSL Hysteresis ±0.10 %FS BFSL Output Unamplified, mV/V output Resolution Infinite Calibration 5-point calibration: 0 %, 50 %, and 100 % Media Gases, liquids compatible with wetted parts Temperature (Operating) -100 °F to 325 °F, up to 1000 psi Temperature (Compensated) 15 °C to 71 °C [60 °F to 160 °F] Temperature Effect (Zero) 0.0025 %FS/°F Temperature Effect (Span) 0.0025 %reading/°F Sealing Hermetically sealed IP68/NEMA 6P Electrical Termination (std) PTIH-10-6P or equivalent (hermetic stainless) Mating Connector PT06A-10-6S or equivalent (AA111) Strain Gage Type Bonded foil Insulation Resistance 5000 mOhm @ 50 Vdc Bridge Resistance 350 Ohm Shunt Calibration Data Included Overload (safe) 0.5 Overload (burst) 2 Wetted Parts Material 17-4 PH Stainless Steel Case Material 304 Stainless Steel Intrinsically Safe Option 2N option only Pressure Port 1/4-18 NPT male Product Dimensions 38 mm D x 51 mm L [1.5 in D x 2.02 in L] Agency Approvals and Standards CE Availability Global Series Name TJE

Назад в раздел