Главная Каталог honeywell MS8 MS81 MS810

MS8104F1210/U - Fast-acting, two-position actuator with 30 lb-in., 2 aux. switches, spring return - Quad Industry GmbH

Артикул: MS8104F1210/U
Наименование: Fast-acting, two-position actuator with 30 lb-in., 2 aux. switches, spring return
Производитель: Honeywell

Overview

The Honeywell Fast-Acting, Two-Position Actuators are 24 V, 30 lb-in., spring return direct coupled actuators (DCA) for Fire and Smoke dampers (on/off control). The actuator accepts an on/off signal from a single-pole, single-throw (SPST) controller. Reversible mounting allows actuator to be used for either clockwise (cw) or counterclockwise (ccw) spring rotation.

Product Specifications

Application: Fire and Smoke
Dimensions (in.): 8.9 in high x 5.13 in wide x 3.32 in deep
Dimensions (mm): 227 mm high x 129 mm wide x 84 mm deep
Weight (lb): 5 lb
Weight (kg): 2.3 kg
Materials: Aluminum housing
Comments: Two integral 3/8 in. clip-in flexible conduit connections
Item Type: Product
Mounting: Direct Coupled
Frequency: 50 Hz, 60 Hz
Approvals, Underwriters Laboratories Inc.: UL873, Plenum Rated
Electrical Connections: Color-coded leads
Operating Humidity Range (% RH): 5 to 95% RH, non-condensing
Supply Voltage: 24 Vac +20% -10%
Power Consumption: Driving-- 16VA, Holding-- 8 VA
Shipping and Storage Temperature Range (F): -40 F to 140 F
Shipping and Storage Temperature Range (C): -40 C to +60 C
Approvals, Canadian Underwriters Laboratories Inc.: cUL C22.2 No. 24-93
Ambient Temperature Range (F): 0 F to +130 F
Ambient Temperature Range (C): -18 C to +55 C
Switch Ratings: 24 Vac/dc, 3A res
Approvals, C-Tick: N314
Environmental, Electrical or Ingress Protection Rating: NEMA 1, IP40
Internal Auxiliary Switch: 2
Maximum Noise Rating: Driving (dB(A) @ 1m)-- 80, Holding (dB(A) @ 1m)-- 20 (no audible noise)
Stroke: 95 ?3 degrees
Shaft Dimensions (in.): 1/2 in. round
Actuator Type: Damper
Control Signal: Two position, SPST
Fail Safe Mode: Spring Return
Torque Rating (lb-in.): 30 lb-in.
Torque Rating (Nm): 3.4 Nm
Spring Return Torque/Force (lb-in., lbf): 30 lb-in.
Spring Return Torque/Force (Nm, N): 3.4 Nm
Additional Torque Ratings (lb-in.): Maximum Stall-- 150 lb-in., Minimum Driving at 350 F-- 30 lb-in.
Additional Torque Ratings (Nm): Maximum Stall-- 17 Nm, Minimum Driving at 175 C-- 3.4 Nm
External Auxiliary Switches Available: No
Timing, Nominal: Driving @ 60 Hz-- 15 sec
Spring Return Timing: 15 sec
Shaft Adapter Type: Aluminum Hub, two set screws
Shaft Dimensions (mm): 13 mm round
Spring Return Direction: By orientation
Electrical Connections (in.): 39 in.
Electrical Connections (mm): 1 m