Application: for circuit control, protection, monitoring and power distribution in power distribution system.

Standards:IEC 60439-1

Parameters:Rated insulation voltage: 1000V.  
                      Rated operational voltage: 690V.

Features:  1.Rated current up to 6300A. High impact resistance and high protection level.
                   2.Efficient distribution circuit configuration. A single standard panel can be installed with 48 circuits.
                   3.NJZ3.0D intelligent power control system adopted.
                   4.Maintenance-free. High safety protection performance, protection degree of the enclosure can be up to IP54.
                   5.Raw material is non-CFC and non-halogen, which is environment-friendly.
                   6.Structural design and material selection greatly pay attention to preventing the production of arc.
                   7.Modular design and flexible assembly.

Anti-arc design and consistent with type testing TTA.
Protection level: IP40, IP41, IP43, IP54 
Internal partition mode from the mode 1 to mode 4, comply with IEC60439-1
Allow front and back operation; back to back installation, double-sided operation
Rated voltage Ue: the main circuit :up to 690V AC, auxiliary circuit: 220/380V
Rated insulation voltage Ui: 1000V, rated impulse withstand voltage Uimp: 12KV
Bus rated current (In)
    Horizontal main bus bar:
        Rated current up to 6300A
        Rated peak withstand current (Ipk) up to 176KA, I
        Rated short-time withstand current (Ipk) up to 105KA, 3s
    Vertical bus bar for fixed installation technology:
        Rated current up to 2000 A
        Rated peak withstand current (Ipk) up to 143KA, Is
        Rated peak withstand current (Ipk) up to 80KA, 3s
    Vertical bus bar for plug-in and withdraw technology: 
        Rated current up to 1500A
        Rated peak withstand current (Ipk) up to 143 KA, Is
        Rated peak withstand current (Ipk) up to 80 KA, 3s

• Switchgears