| | SCALANCE X307-2EEC, MANAGED IE SWITCH, COMPACT; 5 X 10/100MBIT/S RJ45; 2 X 10/100/1000MBIT/S RJ45; 2 X 100MBIT/S LC FO PORTS; 100 - 240V AC/DC POWER SUPPLY; CONFORMAL COATING; LED-DIAGNOSTICS, FAULT SIGNAL CONTACT WITH SELECT/SET-BUTTON; PROFINET-IO DEVICE, NETWORK- MANAGEMENT, INTEGRATED REDUNDANCY MANAGER, OFFICE FEATURES (RSTP, VLAN, IGMP,..); C-PLUG IN SCOPE OF SUPPLY |
| Transmission rate | |
| Transfer rate / 1 | 10 Mbit/s |
| Transfer rate / 2 | 100 Mbit/s |
| Transfer rate / 3 | 1000 Mbit/s |
| Interfaces | |
| Number of electrical/optical connections / for network components or terminal equipment / maximum | 9 |
| Number of electrical connections | |
- for network components and terminal equipment
| 7 |
| | 1 |
| | 1 |
| Design of electrical connection | |
- for network components and terminal equipment
| RJ45 port |
| | 3-pole terminal block |
| | 3-pole terminal block |
| Number of optical interfaces / for optical waveguide | |
| | 2 |
| Design of optical interface / for optical waveguide | |
| | LC port (multimode up to 5 km) |
| Connectable optical power relative to 1 mW | |
- of the transmitter output
| -19… -14 dB |
- of the receiver input / maximum
| -14 dB |
| Optical sensitivity relative to 1 mW / of the receiver input / minimum | -32 dB |
| Attenuation / of fiber-optic cable transmission link / minimum necessary | 0 dB |
| Range / at the optical interface / depending on the optical fiber used | 0… 5 km |
| design of the removable storage / C-PLUG | Yes |
| Inputs/outputs | |
| Operating voltage / of signaling contacts / at AC / rated value | 276 V |
| Operating current / of signaling contacts / at AC / maximum | 5 A |
| Operating voltage / of signaling contacts / at DC / rated value | 230 V |
| Operating current / of signaling contacts / at DC / maximum | 0.1 A |
| Supply voltage, current consumption, power loss | |
| Type of supply voltage / redundant power supply unit | No |
| Type of voltage / of supply voltage | AC |
| Supply voltage | |
| | 230 V |
| | 80… 276 V |
| Type of voltage / 2 / of the supply voltage | DC |
| Supply voltage / for DC | 220 V |
| | 46.25… 300 V |
| Product component / fusing at power supply input | Yes |
| Consumed current / maximum | 0.08 A |
| Power loss | |
| | 18 W |
| | 18 W |
| Permitted ambient conditions | |
| Ambient temperature | |
| | -40… +70 °C |
| | -40… +70 °C |
| | -40… +70 °C |
| | A maximum operating temperature of +85 °C is permissible for a duration of 16 hours |
| Relative humidity | |
- at 25 °C / without condensation / during operating / maximum
| 95 % |
| Ambient condition / for (standard) operation mode | Conformal coating |
| Protection class IP | IP30 |
| Design, dimensions and weight | |
| Design | compact |
| Width | 216 mm |
| Height | 143 mm |
| Depth | 110 mm |
| Net weight | 1.85 kg |
| Type of mounting | |
| | Yes |
| | Yes |
| | Yes |
| | Yes |
| Type of mounting | Wall mounting is possible only with an additional wall bracket; 19" mounting only with installation of two X-300EEC switches in pairs using a mounting plate |
| Product properties, functions, components / general | |
| Cascading in the case of a redundant ring / at reconfiguration time of <\~0.3\~s | 50 |
| Cascading in cases of star structuring | Any (depending only on signal propagation time) |
| Product function | |
| | Yes |
| | Yes |
| | Yes |
| | Yes |
- Configuration with STEP 7
| Yes |
| | Yes |
| | Yes |
| | Yes |
| | Yes |
- for IRT / PROFINET IO switch
| No |
| | Yes |
| | Yes |
Protocol / is supporte
|
