| | SIMATIC DP, INTERFACE DP/PA-LINK A. ET200M IM153-2 HF FOR EXPANDED TEMPERATURE RANGE FOR MAX. 12 S7-300 MODULES, WITH REDUNDANCY, TIME STAMPING FIT FOR ISOCHRONE MODE NEW FEATURES: 12 MODULES / STATION SLAVE INITIATIVE FOR SWITCHES AND DRIVEES EXTENDED DATA FOR HART SECON- DARY VARIABLES OPERATON WITH 64PT MODULES EXTENDES TIMESTAMPS WITH 32 SIGNALS / SLOT |
| |
| General information |
| Vendor identification (VendorID) | 801Eh |
| Supply voltage |
| 24 V DC | Yes |
| permissible range, lower limit (DC) | 20.4 V |
| permissible range, upper limit (DC) | 28.8 V |
| permissible range (ripple included), lower limit (DC) | 20.4 V |
| permissible range (ripple included), upper limit (DC) | 28.8 V |
| External protection for supply cables (recommendation) | 2.5 A |
| Mains buffering |
| Mains/voltage failure stored energy time | 5 ms |
| Input current |
| Current consumption, max. | 600 mA |
| Rated value at 24 V DC | 650 mA |
| Inrush current, typ. | 3 A |
| I²t | 0.1 A²·s |
| Output voltage |
| Rated value, 5 V DC | Yes |
| Output current |
| for backplane bus (5 V DC), max. | 1.5 A |
| Power losses |
| Power loss, typ. | 5.5 W |
| Address area |
| Addressing volume |
| Outputs | 244 byte |
| Inputs | 244 byte |
| Hardware configuration |
| Number of modules per DP slave interface, max. | 12 |
| Time stamping |
| Accuracy | 1 ms; 1ms at up to 8 modules; 10ms at up to 12 modules |
| Number of message buffers | 15 |
| Messages per message buffer | 20 |
| Number of stampable digital inputs, max. | 128; Max. 128 signals/station; max. 32 signals/slot |
| Time format | RFC 1119 |
| Time resolution | 0.466 ns |
| Time interval for transmitting the message buffer if a message is present | 1000 ms |
| Time stamp on signal change | rising / falling edge as signal entering or exiting |
| Interfaces |
| Interface physics, RS 485 | Yes |
| Interface physics, FOC | No |
| PROFIBUS DP |
| Node addresses | 1 to 125 permitted |
| Automatic detection of transmission speed | Yes |
| PROFIBUS DP, output current, max. | 70 mA |
| Transmission procedure | RS 485 |
| Transmission rate, max. | 12 Mbit/s |
| SYNC capability | Yes |
| FREECE capability | Yes |
| Direct data exchange (slave-to-slave communication) | Yes; Sender |
| PROFIBUS DP | 9-pin sub D |
| 1st interface |
| DP slave |
| GSD file | SI0480E.GSG |
| Automatic baud rate search | Yes |
| Communication functions |
| Bus protocol/transmission protocol | PROFIBUS DP to EN 50170 |
| Isolation |
| Isolation checked with | Isolation voltage 500 V |
| Degree and class of protection |
| IP20 | Yes |
| Ambient conditions |
| Operating temperature |
| Min. | -25 °C |
| max. | 60 °C |
| Air pressure |
| Operating altitude above sea level, max. | 3000 m |
| Dimensions |
| Width | 40 mm |
| Height | 125 mm |
| Depth | 117 mm |
| Weight |
| Weight, approx. | 360 g |
| Status | Apr 9, 2012 |
