| | SIMATIC DP, PROFINET INTERFACE MODULE IM154-4 PN, HIGH FEATURE FOR ET 200PRO, INTEGRATED SWITCH, INCLUSIVE TERMINATING MODULE, CONNECTING MODULE IM PN 6ES7194-4A.00-0AA0 MUST BE ORDERED SEPARATELY |
| |
| General information |
| Vendor identification (VendorID) | 0x002A |
| Device identifier (DeviceID) | 0x0305 |
| Supply voltage |
| Rated value (DC) | 24 V |
| 24 V DC | Yes |
| permissible range, lower limit (DC) | 20.4 V; Unit [V] |
| permissible range, upper limit (DC) | 28.8 V; Unit [V] |
| Reverse polarity protection | Yes; against destruction |
| Short-circuit protection | Yes; Fuse in lower part is exchangeable, the fuse on the IM-LP is not |
| Input current |
| from backplane bus 3.3 V DC, max. | Not applicable |
| from supply voltage 1L+, max. | 400 mA; Dependent on terminal module, typ. maximum value for FO connection method, full load on RWB and 20.4 V input voltage |
| Power losses |
| Power loss, typ. | 6 W; Dependent on terminal module, typ. maximum value for CU connection method, full load on RWB, for FO the value is approx. 0.7 W higher |
| Memory |
| Micro Memory Card | No; Internal memory medium |
| Address area |
| Addressing volume |
| Outputs | 256 byte |
| Inputs | 256 byte |
| Interfaces |
| Supports protocol for PROFINET IO |
| Automatic detection of transmission speed | Yes |
| Transmission rate, max. | 100 Mbit/s |
| Services | ARP, PING, SNMP |
| Protocols |
| Supports protocol for PROFINET IO | Yes |
| Interrupts/diagnostics/status information |
| Diagnostics indication LED |
| Bus fault BF (red) | Yes; Additional LEDs (MAINT, P1/2 LINK, P1/2 RX/TX) available |
| Group error SF (red) | Yes |
| Monitoring 24 V voltage supply ON (green) | Yes |
| Load voltage monitoring DC 24 V (green) | Yes |
| Parameter |
| Diagnostic alarm | 1 |
| Hardware interrupt | 1 |
| Swapping interrupt | 1 |
| identifier-related diagnostic data | 1 |
| Module status | 1 |
| Channel-related diagnostics | 1 |
| Startup if setpoint not equal to actual configuration | 1 |
| Hot swapping of modules | 1 |
| Galvanic isolation |
| between backplane bus and electronics | No |
| Isolation |
| Isolation checked with | 500 V DC |
| Ambient conditions |
| Operating temperature |
| Min. | -25 °C |
| max. | 55 °C |
| Storage/transport temperature |
| Min. | -40 °C |
| max. | 70 °C |
| Degree and class of protection |
| IP65 | Yes |
| IP66 | Yes |
| IP67 | Yes |
| Dimensions |
| Width | 90 mm |
| Height | 130 mm |
| Depth | 59.3 mm |
| Weight |
| Weight, approx. | 490 g |
| Status | Mar 12, 2012 |
