| | SIMATIC DP, PROFINET INTERFACE MODULE IM154-4 PN, HIGH FEATURE FOR ET 200PRO, M12 / 7/8", 2 X M12 AND 1 X 7/8", INTEGRATED SWITCH, INCLUSIVE TERMINATING MODULE, MICRO MEMORY CARD REQUIRED |
| |
| Supply voltage |
| Rated value (DC) | 24 V |
| 24 V DC | Yes |
| permissible range, lower limit (DC) | 20.4 V |
| permissible range, upper limit (DC) | 28.8 V |
| Reverse polarity protection | Yes; against destruction |
| Short-circuit protection | Yes; over exchangeable fuses |
| Input current |
| from supply voltage 1L+, max. | 250 mA |
| Power losses |
| Power loss, typ. | 4.5 W |
| Memory |
| Micro Memory Card | Yes |
| Address area |
| Addressing volume |
| Outputs | 256 byte |
| Inputs | 256 byte |
| Interfaces |
| Supports protocol for PROFINET IO |
| Automatic detection of transmission speed | Yes |
| Transmission rate, max. | 100 Mbit/s; full duplex |
| Services | Network management functions, network diagnostics (SNMP), ping, arp |
| Protocols |
| Supports protocol for PROFINET IO | Yes |
| Interrupts/diagnostics/status information |
| Diagnostics indication LED |
| Bus fault BF (red) | Yes |
| Group error SF (red) | Yes |
| Monitoring 24 V voltage supply ON (green) | Yes |
| Load voltage monitoring DC 24 V (green) | Yes |
| Galvanic isolation |
| between backplane bus and electronics | Yes |
| Isolation |
| Isolation checked with | 500 V DC |
| Ambient conditions |
| Operating temperature |
| Min. | -25 °C |
| max. | 55 °C |
| Storage/transport temperature |
| Min. | -40 °C |
| max. | 70 °C |
| Degree and class of protection |
| IP65 | Yes |
| IP66 | Yes |
| IP67 | Yes |
| Dimensions |
| Width | 90 mm |
| Height | 130 mm |
| Depth | 71 mm |
| Weight |
| Weight, approx. | 480 g |
| Status | Mar 12, 2012 |
