| | SIMATIC DP, ET 200M INTERFACE IM 153-4 PN IO HIGH FEATURE FOR MAX. 12 S7-300 MODULES, SUPPORTS FAIL SAFE MODULES, HART MODULES SHARED DEVICE, MEDIUM REDUNDANCY PROTOCOL |
| |
| General information |
| Vendor identification (VendorID) | 002AH |
| Device identifier (DeviceID) | 0302H |
| Supply voltage |
| 24 V DC | Yes |
| permissible range, lower limit (DC) | 20.4 V |
| permissible range, upper limit (DC) | 28.8 V |
| permissible range (ripple included), lower limit (DC) | 18.5 V |
| permissible range (ripple included), upper limit (DC) | 30.2 V |
| External protection for supply cables (recommendation) | In a construction with grounded reference potential, a fuse is necessary for redundant interface modules (Recommendation: 2.5 A) |
| Mains buffering |
| Mains/voltage failure stored energy time | 5 ms |
| Input current |
| Current consumption, max. | 600 mA |
| Inrush current, typ. | 4 A |
| I²t | 0.09 A²·s |
| Output voltage |
| Rated value, 5 V DC | Yes |
| Output current |
| for backplane bus (5 V DC), max. | 1.5 A |
| Power losses |
| Power loss, typ. | 6 W; Typical |
| Address area |
| Addressing volume |
| Outputs | 192 byte |
| Inputs | 672 byte; Extended HART user data |
| Hardware configuration |
| Number of modules per DP slave interface, max. | 12 |
| Communication functions |
| Bus protocol/transmission protocol | PN IO |
| Interrupts/diagnostics/status information |
| Diagnostics indication LED |
| Connection to network LINK (green) | Yes |
| Transmit/receive RX/TX (yellow) | Yes |
| Isolation |
| Isolation checked with | Between Profinet and 24 V supply: 1500 V AC Between functional grounding and 24 V supply: 500 V DC |
| Ambient conditions |
| Operating temperature |
| Min. | 0 °C |
| max. | 60 °C |
| Air pressure |
| Operating altitude above sea level, max. | 2000 m |
| Degree and class of protection |
| IP20 | Yes |
| Dimensions |
| Width | 40 mm |
| Height | 125 mm |
| Depth | 118 mm |
| Weight |
| Weight, approx. | 215 g |
| Status | Mar 12, 2012 |
