| | SIMATIC DP, PNEUMATIC INTERFACE FOR ET 200PRO 16 DO PNEUMATIC FOR COUPLING WITH FESTO VALVE BLOCK CPV-14 INCLUSIVE BUS MODULE |
| |
| Supply voltage |
| Load voltage 2L+ |
| Rated value (DC) | 24 V |
| Short-circuit protection | Yes |
| Reverse polarity protection | Yes |
| Input current |
| from load voltage 2L+ (without load), max. | 20 mA |
| from backplane bus 3.3 V DC, max. | 25 mA |
| Power losses |
| Power loss, typ. | 3.7 W |
| Address area |
| Address space per module |
| without packing | 2 byte |
| Digital outputs |
| Number/binary outputs | 16 |
| Load resistance range |
| lower limit | 500 Ω |
| upper limit | 2500 Ω |
| Output current |
| for signal "1" rated value | 16 mA |
| Switching frequency |
| with inductive load, max. | 20 Hz |
| Aggregate current of outputs (per group) |
| all mounting positions |
| up to 55 °C, max. | 330 mA; only up to 50 °C, limited by valves |
| Interrupts/diagnostics/status information |
| Alarms |
| Diagnostic alarm | Yes |
| Diagnostic messages |
| Diagnostic functions | Yes |
| Diagnostic information readable | Yes |
| Diagnostics indication LED |
| Group error SF (red) | Yes |
| Status indicator digital output (green) | Yes |
| Parameter |
| Remark | Diagnosis load voltage 2L+ |
| Galvanic isolation |
| between backplane bus and all other circuit components | Yes |
| between the channels and backplane bus | Yes |
| Galvanic isolation digital outputs |
| between the channels and the backplane bus | Yes |
| Permissible potential difference |
| between different circuits | 75 VDC / 60 VAC |
| Isolation |
| Isolation checked with | 500 V DC |
| tested with |
| Load voltage L+ against backplane bus | 500 V DC |
| Dimensions |
| Width | 120 mm |
| Height | 152 mm |
| Depth | 47 mm |
| Status | Mar 12, 2012 |
