| SIMATIC DP, ELECTRON. MODULE FOR ET200ECO, 4/8 F-DI PROFISAFE 24V DC, UP TO CATEGORY 4 (EN954-1) / SIL 3 (IEC61508) |
|
FH technology |
Module for failsafe applications | Yes |
Supply voltage |
Rated value (DC) | 24 V |
Reverse polarity protection | No |
Input current |
from supply voltage 1L+, max. | 100 mA |
Encoder supply |
Number of outputs | 2 |
Output voltage | min. L+ (-1.5 V) |
Output current, rated value | 300 mA |
Output current |
Short-circuit protection | Yes |
Power losses |
Power loss, typ. | 3 W |
Digital inputs |
Number/binary inputs | 8; 8 single channel, 4 two-channel |
Input characteristic curve acc. to IEC 61131, Type 1 | Yes |
Number of simultaneously controllable inputs | 8; 8 single channel, 4 two-channel |
Input voltage |
Type of input voltage | DC |
Rated value, DC | 24 V |
for signal "0" | -30 to +5 V |
for signal "1" | 15 to 30 V |
Input current |
for signal "1", typ. | 3.7 mA |
Cable length |
Cable length unshielded, max. | 30 m |
Encoder |
Connectable encoders |
2-wire sensor | No |
Interfaces |
PROFIBUS DP |
Transmission rate, max. | 12 Mbit/s |
Protocols |
Further protocols |
PROFIBUS DP protocol | Yes |
Interrupts/diagnostics/status information |
Diagnostics indication LED |
Group error SF (red) | Yes |
Status indicator digital input (green) | Yes |
Channel error indicator F (red) | No |
Galvanic isolation |
between PROFIBUS DP and all other circuit components | Yes |
Galvanic isolation digital inputs |
between the channels | No |
Permissible potential difference |
between different circuits | 75 VDC / 60 VAC |
Isolation |
Isolation checked with | 500 V AC for 1 min. |
Standards, approvals, certificates |
Highest safety class achievable in safety mode |
acc. to EN 954 | Cat. 3 (single-channel), Cat. 4 (two-channel) |
acc. to IEC 61508 | SIL 2 (single-channel), SIL 3 (two-channel) |
Dimensions |
Width | 60 mm |
Height | 210 mm |
Depth | 28 mm |
Weight |
Weight, approx. | 220 g |
Status | Mar 12, 2012 |