| | SIMATIC DP, PNEUMATIC MODULE EM 148-P FOR ET 200X 4 DI,/2 DO PNEUMATIC 2 X 4/2 WAY VALVE FLOW RATE 300 L/MIN |
| |
| Input current |
| from load voltage 2L+ (including valve), max. | 130 mA |
| per valve, max. | 50 mA |
| from backplane bus 5 V DC, max. | 40 mA |
| Power losses |
| Power loss, typ. | 3 W |
| Digital inputs |
| Number/binary inputs | 4; Electronic |
| Input voltage |
| Rated value, DC | 24 V |
| for signal "0" | -3 to +5 V |
| for signal "1" | 13 to 30 V |
| Input current |
| for signal "1", typ. | 7 mA |
| Input delay (for rated value of input voltage) |
| for standard inputs |
| at "0" to "1", min. | 1.2 ms |
| at "0" to "1", max. | 4.8 ms |
| Cable length |
| Cable length unshielded, max. | 30 m |
| Encoder |
| Connectable encoders |
| 2-wire sensor | Yes |
| Permissible quiescent current (2-wire sensor), max. | 1.5 mA |
| Pneumatics |
| Connection method, pneumatic connection |
| Number of outputs for valve control | 2 |
| Switching outputs | Quickstar QS 6 |
| Air supply/exhaust | Quickstar QS 8, jointly recorded for both valves |
| Controllable pneumatic cylinders, dual action cylinders | Yes |
| Controllable pneumatic cylinders, single action cylinders | Yes |
| Valve type | 2 x monostable 4/2-way valve with spring reset |
| Pressure range | 3 to 8 bar |
| Rated flow | 300 l/min |
| Valve switching times | 20 ms; On, about: 20 ms; Off: 20 ms |
| Manual operation | yes, momentary contact |
| Medium | Compressed air filtered (40 µm), oiled (oil: VG 32), unoiled |
| Dimensions |
| Width | 87 mm; Width module 60 mm |
| Height | 173 mm |
| Depth | 88 mm |
| Status | Mar 12, 2012 |
