| | SIMATIC DP, ELEKTRONIC MODULE FOR ET200PRO, 4 AI TC HIGH FEATURE, TC TYP B, E, J, K, L, N, R, S,T VOLTAGE +/- 80MV CHANNEL DIANOSTICS; INCL. BUS MODULE, CONNECTING MODULE IO 6ES7194-4..00-0AA0 MUST BE ORDERED SEPERATELY |
| |
| Supply voltage |
| Load voltage L+ |
| Rated value (DC) | 24 V |
| Reverse polarity protection | Yes; against destruction |
| Input current |
| from load voltage L+ (without load), max. | 34 mA; typ. |
| from backplane bus 3.3 V DC, max. | 20 mA; typ. |
| Power losses |
| Power loss, typ. | 0.7 W |
| Address area |
| Address space per module |
| Address space per module, max. | 8 byte |
| Analog inputs |
| Number of analog inputs | 4 |
| permissible input voltage for voltage input (destruction limit), max. | 20 V |
| Cycle time (all channels) max. | Number of active channels per module x basic conversion time |
| Input ranges |
| Voltage | Yes |
| Thermocouple | Yes |
| Input ranges (rated values), voltages |
| -80 mV to +80 mV | Yes |
| Input resistance (-80 mV to +80 mV) | 10 MΩ |
| Input ranges (rated values), thermoelements |
| Type B | Yes |
| Input resistance (Type B) | 10 MΩ |
| Type E | Yes |
| Input resistance (Type E) | 10 MΩ |
| Type J | Yes |
| Input resistance (type J) | 10 MΩ |
| Type K | Yes |
| Input resistance (Type K) | 10 MΩ |
| Type L | Yes |
| Input resistance (Type L) | 10 MΩ |
| Type N | Yes |
| Input resistance (Type N) | 10 MΩ |
| Type R | Yes |
| Input resistance (Type R) | 10 MΩ |
| Type S | Yes |
| Input resistance (Type S) | 10 MΩ |
| Type T | Yes |
| Input resistance (Type T) | 10 MΩ |
| Thermocouple (TC) |
| [nicht versorgt: TAK_ABT261_001_000] |
| internal temperature compensation | Yes |
| external temperature compensation with compensations socket | Yes |
| Cable length |
| Cable length, shielded, max. | 30 m |
| Analog value creation |
| Measurement principle | integrating |
| Integrations and conversion time/ resolution per channel |
| Resolution with overrange (bit including sign), max. | 15 bit; + sign |
| Integration time, ms | 2.5/16.67/20/100 ms |
| Interference voltage suppression for interference frequency f1 in Hz | 10/50/60/400 Hz |
| Conversion time (per channel) | 4.7/19/22/102 ms |
| Smoothing of measured values |
| Parameterizable | Yes |
| Step: None | Yes; 1 x cycle time |
| Step: low | Yes; 4 x cycle time |
| Step: Medium | Yes; 16 x cycle time |
| Step: High | Yes; 64 x cycle time |
| Errors/accuracies |
| Temperature error (relative to input area) | Positive temperature |
| Crosstalk between the inputs, min. | -90 dB; max. |
| Operational limit in overall temperature range |
| Voltage, relative to input area | Positive temperature |
| Interference voltage suppression for f = n x (fl +/- 1%), fl = interference frequency |
| Series mode interference (peak value of interference < rated value of input range), min. | 42 dB |
| common mode voltage (USS < 2.5 V) , min. | 85 dB; Interference voltage < 10 V |
| Interrupts/diagnostics/status information |
| Diagnostic messages |
| Wire break | No |
| Overflow/underflow | Yes |
| Diagnostics indication LED |
| Group error SF (red) | Yes |
| Parameter |
| Measurement type/range | Deactivated/ +/- 80 mV/ TC-EL Type T (Cu-CuNi)/ TC-EL Type K (NiCr-Ni)/ TC-EL Type B (PtRh-PtRh)/ TC-EL Type N (NiCrSi-NiSi)/ TC-EL Typ E (NiCr-CuNi)/ TC-EL Type R (PtRh-Pt)/ TC-EL Type S (PtRh-Pt)/ TC-EL Type J (Fe-Cu-Ni)/ TC-EL Type L (Fe-CuNi) |
| Interference frequency suppression | 10/50/60/400 Hz |
| Group diagnostics | Yes |
| Overflow/underflow | Yes |
| Comparison point | None/internal/RTD(0)/dyn. ref. temp./fix. ref. temp. |
| Unit | °C/°F/K |
| Galvanic isolation |
| Galvanic isolation analog inputs |
| between the channels | No |
| between the channels and the backplane bus | Yes |
| between the channels and the load voltage L+ | Yes |
| Permissible potential difference |
| between the inputs (UCM) | 20 Vpp AC |
| Isolation |
| Isolation checked with | 500 V DC |
| Dimensions |
| Width | 45 mm |
| Height | 130 mm |
| Depth | 35 mm |
| Weight |
| Weight, approx. | 150 g |
| Status | Mar 12, 2012 |
