| SIMATIC DP, ELECTRONIC MODULES FOR ET200PRO 4 AI RTD HIGH FEATURE, PT100; PT200; PT500; PT1000; NI100; NI200; NI500; NI1000; CHANNEL DIANOSTICS; INCLUSIVE BUS MODULE, CONNECTING MODULE IO 6ES7194-4..00-0AA0 MUST BE ORDERED SEPERATELY |
|
Supply voltage |
Load voltage L+ |
Rated value (DC) | 24 V |
Reverse polarity protection | Yes; against destruction |
Input current |
from backplane bus 3.3 V DC, max. | 10 mA; typ. |
Power losses |
Power loss, typ. | 0.7 W |
Address area |
Address space per module |
Address space per module, max. | 8 byte |
Analog inputs |
Number of analog inputs | 4 |
Cycle time (all channels) max. | 83 ms; 83 ms at 50 Hz; 69 ms at 60 Hz |
Technical unit for temperature measurement adjustable | Yes |
Input ranges |
Voltage | No |
Current | No |
Thermocouple | No |
Resistance thermometer | Yes |
Resistance | Yes |
Input ranges (rated values), resistance thermometers |
Cu 10 | No |
Ni 100 | Yes |
Input resistance (Ni 100) | 10000 kΩ |
Ni 1000 | Yes |
Input resistance (Ni 1000) | 10000 kΩ |
Ni 120 | Yes |
Input resistance (Ni 120) | 10000 kΩ |
Ni 200 | Yes |
Input resistance (Ni 200) | 10000 kΩ |
Ni 500 | Yes |
Input resistance (Ni 500) | 10000 kΩ |
Pt 100 | Yes |
Input resistance (Pt 100) | 10000 kΩ |
Pt 1000 | Yes |
Input resistance (Pt 1000) | 10000 kΩ |
Pt 200 | Yes |
Input resistance (Pt 200) | 10000 kΩ |
Pt 500 | Yes |
Input resistance (Pt 500) | 10000 kΩ |
Input ranges (rated values), resistors |
0 to 150 ohms | Yes |
Input resistance (0 to 150 ohms) | 10000 kΩ |
0 to 300 ohms | Yes |
Input resistance (0 to 300 ohms) | 10000 kΩ |
0 to 600 ohms | Yes |
Input resistance (0 to 600 ohms) | 10000 kΩ |
0 to 3000 ohms | Yes |
Input resistance (0 to 3000 ohms) | 10000 kΩ |
Resistance thermometer (RTD) |
Characteristic linearization |
for resistance thermometer | Ptxxx, Nixxx |
Characteristic linearization |
Parameterizable | Yes |
Cable length |
Cable length, shielded, max. | 30 m |
Analog value creation |
Measurement principle | integrating |
Integrations and conversion time/ resolution per channel |
Resolution with overrange (bit including sign), max. | 15 bit; at 150, 300, 600 und 3000 ohms; otherwise 15 bits + sign |
Integration time, ms | 20 / 16,667 |
Interference voltage suppression for interference frequency f1 in Hz | 50/60 Hz |
Conversion time (per channel) | 20.625 ms; 20.625 ms at 50 Hz; 17.25 ms at 60 Hz |
Smoothing of measured values |
Parameterizable | Yes |
Step: None | Yes; 1 x cycle time |
Step: low | Yes; 4 x cycle time |
Step: Medium | Yes; 16 x cycle time |
Step: High | Yes; 64 x cycle time |
Encoder |
Connection of signal encoders |
for resistance measurement with 2-conductor connection | Yes; Line resistances are also measured |
for resistance measurement with 3-conductor connection | Yes |
for resistance measurement with 4-conductor connection | Yes |
Errors/accuracies |
Linearity error (relative to input area) | +/- 0.05 % |
Temperature error (relative to input area) | +/- 0.002 %/K |
Crosstalk between the inputs, min. | -50 dB |
Repeat accuracy in settled status at 25 °C (relative to input area) | +/- 0.015 % |
Operational limit in overall temperature range |
Resistance-type thermometer, relative to input area | +/- 0.175 % |
Basic error limit (operational limit at 25 °C) |
Resistance-type thermometer, relative to input area | +/- 0.125 % |
Interference voltage suppression for f = n x (fl +/- 1%), fl = interference frequency |
Series mode interference (peak value of interference < rated value of input range), min. | 50 dB |
common mode voltage (USS < 2.5 V) , min. | 70 dB; Interference voltage < 5 V |
Interrupts/diagnostics/status information |
Diagnostic messages |
Wire break | Yes |
Group error | Yes |
Overflow/underflow | Yes |
Diagnostics indication LED |
Group error SF (red) | Yes |
Parameter |
Diagnosis: wire break | 1 |
Load voltage | No |
Measurement type/range | R4L / R3L / R2L/ TR4L / TR3L / TR2L |
Interference frequency suppression | 50/60 Hz |
Group diagnostics | 1 |
Overflow/underflow | 1 |
Unit | Degrees C / Degrees F |
Galvanic isolation |
Galvanic isolation analog inputs |
between the channels | No |
between the channels and the backplane bus | Yes |
Permissible potential difference |
between the inputs (UCM) | 5 Vpp AC |
between MANA and M internally (UISO) | 500 V DC |
Isolation |
Isolation checked with | Назад в раздел
|