| | SIMATIC DP, DISTRIBUTED I/O ET200R: HANDLING MODULE IP65, METAL HOUSING, 8 DI + 8 DI/DO PARAMETRIERBAR, DC 24V, 5 PIN, 8 X M12; 2 X M23 (DP, PS, ANALOG) |
| |
| General information |
| Housing | Die-cast aluminum |
| Supply voltage |
| 24 V DC | Yes; -15 / +20 % |
| permissible range, lower limit (DC) | 20.4 V |
| permissible range, upper limit (DC) | 28.8 V |
| Reverse polarity protection | Yes; Also electronic protection |
| Encoder supply |
| Number of outputs | 8 |
| Output current, rated value | 0.5 A; 8 channels each |
| Digital inputs |
| Number/binary inputs | 8; 16 process channels, 8 DI fixed, 8 DI/DO can be set in parameters |
| Input characteristic curve acc. to IEC 61131, Type 2 | Yes |
| Input voltage |
| Type of input voltage | DC |
| for signal "0" | -3 to +5 V |
| for signal "1" | 15 to 30 V |
| Input current |
| for signal "1", typ. | 7 mA |
| Input delay (for rated value of input voltage) |
| for standard inputs |
| at "0" to "1", max. | 3 ms; typ. |
| Cable length |
| Cable length unshielded, max. | 10 m; for signal lines |
| Digital outputs |
| Number/binary outputs | 8; 16 process channels, 8 DI fixed, 8 DI/DO can be set in parameters |
| Functionality/short-circuit strength | Yes; Electronic |
| Output current |
| for signal "1" permissible range for 0 to 55 °C, max. | 0.5 A |
| Switching frequency |
| with resistive load, max. | 100 Hz |
| Aggregate current of outputs (per group) |
| all mounting positions |
| up to 55 °C, max. | 2 A |
| Cable length |
| Cable length unshielded, max. | 10 m |
| Encoder |
| Connectable encoders |
| 2-wire sensor | Yes |
| Interfaces |
| Bus cables | Bus and voltage: X01/X02: 2x M23 (17-pin) |
| PROFIBUS DP |
| Cable length, max. | 30 m; Per line, shielded |
| Protocols |
| Further protocols |
| PROFIBUS DP protocol | Yes; Ramp-up time at 12 Mbit/s: Approx. 80 ms |
| Interrupts/diagnostics/status information |
| Diagnostic messages |
| Diagnostic functions | Yes; Diagnostic frames |
| Short circuit | Yes; (Digital outputs) per group; X0 to X1 or X2 to X3 |
| Short circuit encoder supply | Yes; per group X0 to X3 or X4 to X7 |
| Missing load voltage | Yes |
| Diagnostics indication LED |
| Description | Channel 01, Channel 02 |
| Bus fault BF (red) | Yes |
| Rated load voltage PWR (green) | Yes; 24 V DC (load voltage) US2 |
| Group error SF (red) | Yes |
| Status indicator digital output (green) | Yes |
| Status indicator digital input (green) | Yes |
| Monitoring 24 V voltage supply ON (green) | Yes; (Logic circuits/encoder voltage) US1 |
| Ambient conditions |
| Operating temperature |
| max. | 55 °C |
| Degree and class of protection |
| IP65 | Yes |
| Standards, approvals, certificates |
| CE mark | Yes |
| CSA approval | Yes; ES 02 or higher |
| UL approval | Yes; ES 02 or higher |
| Connection method |
| Inputs/outputs | 8x 5-pin M12x1 circular connector |
| Dimensions |
| Width | 54 mm |
| Height | 55 mm; 64 mm incl. overall plug height |
| Depth | 150 mm |
| Length | 150 mm |
| Weight |
| Weight, approx. | 780 g |
| Status | Mar 12, 2012 |
