| | SIMATIC DP, ELECTRONIC MODULE FOR ET 200S, 2 PULSE PULSED GENERATOR AND TIMER MODULE, 15 MM WIDE, 2 CHANNELS |
| |
| Supply voltage |
| Load voltage L+ |
| Rated value (DC) | 24 V; From power module |
| Reverse polarity protection | Yes |
| Input current |
| from load voltage L+ (without load), max. | 40 mA |
| from backplane bus 3.3 V DC, max. | 10 mA |
| Encoder supply |
| Output voltage | L+ (-0.8 V) |
| Output current, rated value | 500 mA |
| Output current |
| Short-circuit protection | Yes |
| Power losses |
| Power loss, typ. | 1.8 W |
| Digital inputs |
| Number/binary inputs | 2 |
| Input characteristic curve acc. to IEC 61131, Type 2 | Yes |
| Input voltage |
| Rated value, DC | 24 V |
| for signal "0" | -30 to +5 V |
| for signal "1" | 11 to 30 V |
| Input current |
| for signal "1", typ. | 9 mA |
| Input delay (for rated value of input voltage) |
| Input frequency (with a time delay of 0.1 ms), max. | 20 kHz |
| Minimum pulse width for program reactions | 100 µs |
| Cable length |
| Cable length, shielded, max. | 100 m |
| Digital outputs |
| Number/binary outputs | 2 |
| Functionality/short-circuit strength | Yes |
| Response threshold, typ. | 10 A |
| Limitation of inductive shutdown voltage to | L+ (-50 to -65 V) |
| Lamp load, max. | 10 W |
| Accuracy of pulse duration | +/- (pulse duration x 100 ppm) , +/-100 µs with a load <= 50 ohms |
| minimum pulse duration | 200 µs |
| Controlling a digital input | Yes |
| Output voltage |
| for signal "1", min. | L+ (-1 V) |
| Output current |
| for signal "1" rated value | 2 A |
| for signal "1" permissible range for 0 to 60 °C, min. | 7 mA |
| for signal "1" permissible range for 0 to 60 °C, max. | 2 A |
| for signal "0" residual current, max. | 0.5 mA |
| Output delay with resistive load |
| 0 to "1", max. | 100 µs |
| 1 to "0", max. | 200 µs |
| Switching frequency |
| with resistive load, max. | 2.5 kHz |
| with inductive load, max. | 2 Hz |
| on lamp load, max. | 10 Hz |
| Cable length |
| Cable length, shielded, max. | 1000 m |
| Cable length unshielded, max. | 600 m |
| Encoder |
| Connectable encoders |
| 2-wire sensor | Yes |
| Permissible quiescent current (2-wire sensor), max. | 2 mA |
| Interrupts/diagnostics/status information |
| Diagnostics indication LED |
| Group error SF (red) | Yes |
| Status indicator digital output (green) | Yes |
| Status indicator digital input (green) | Yes |
| Pulse generator |
| Number of channels | 2; 1 digital input and 1 digital output per channel |
| Galvanic isolation |
| Galvanic isolation digital inputs |
| between the channels | No |
| between the channels and the backplane bus | Yes |
| Galvanic isolation digital outputs |
| between the channels | No |
| between the channels and the backplane bus | Yes |
| Permissible potential difference |
| between different circuits | 75 VDC / 60 VAC |
| Isolation |
| Isolation checked with | 500 V DC |
| Dimensions |
| Width | 15 mm |
| Height | 81 mm |
| Depth | 52 mm |
| Weight |
| Weight, approx. | 40 g |
| Status | Mar 12, 2012 |
