| | SIMATIC DP, ELECTRONIC MODULE FOR ET200S, 2 AO U HIGH SPEED, 15 MM WIDTH, +/-10V, +/-5V, 1.. 5V; 16BIT, CYCLE TIME: 0.1 MS WITH LED SF (GROUP FAULT) |
| |
| Supply voltage |
| Load voltage L+ |
| Rated value (DC) | 24 V; From power module |
| Reverse polarity protection | Yes |
| Input current |
| from load voltage L+ (without load), max. | 100 mA |
| from backplane bus 3.3 V DC, max. | 10 mA |
| Power losses |
| Power loss, max. | 2 W |
| Address area |
| Address space per module |
| Address space per module, max. | 4 byte |
| Analog outputs |
| Number of analog outputs | 2 |
| Voltage output, short-circuit protection | Yes |
| Voltage output, short-circuit current, max. | 25 mA |
| Cycle time (all channels) max. | 0.25 ms |
| Output ranges, voltage |
| 1 to 5 V | Yes |
| -10 to +10 V | Yes; +/-5V as well |
| Connection of actuators |
| for voltage output 2-conductor connection | Yes; Without compensation of the line resistances |
| for voltage output 4-conductor connection | Yes |
| Load impedance (in rated range of output) |
| with voltage outputs, min. | 1 kΩ |
| with voltage outputs, capacitive load, max. | 1 µF; 0.1 µF for Twa=0.1 ms |
| Destruction limits against externally applied voltages and currents |
| Voltages at the outputs towards MANA | 15 V; Max. 15 V for max. 5 hours, 75 V for max. 1 s |
| Current, max. | 30 mA; DC |
| Cable length |
| Cable length, shielded, max. | 200 m; Max. 20 m for TWA 100 µs |
| Analog value creation |
| Integrations and conversion time/ resolution per channel |
| Resolution with overrange (bit including sign), max. | 16 bit; 1 to 5 V: 14 bits, +/-10 V: 15 bit + sign, +/-5 V: 14 bits + sign |
| Settling time |
| for resistive load | 0.05 ms |
| for capacitive load | 0.05 ms |
| for inductive load | 0.05 ms |
| Errors/accuracies |
| Output ripple (based on output area, bandwidth 0 to 50 kHz) | +/- 0,02 % |
| Linearity error (relative to output area) | +/- 0,03 % |
| Temperature error (relative to output area) | +/- 0,01 %/K |
| Crosstalk between the outputs, min. | 60 dB |
| Repeat accuracy in settled status at 25 °C (relative to output area) | +/- 0,03 % |
| Operational limit in overall temperature range |
| Voltage, relative to output area | +/- 0,2 % |
| Basic error limit (operational limit at 25 °C) |
| Voltage, relative to output area | +/- 0,01 % |
| Isochronous mode |
| Isochronous operation (application synchronized up to terminal) | Yes |
| Interrupts/diagnostics/status information |
| Substitute values connectable | Yes; 0 to 65535 (range of values must be within the rated range) |
| Diagnostic messages |
| Diagnostic functions | Yes |
| Diagnostic information readable | Yes |
| Wire break | No |
| Short circuit | Yes |
| Group error | Yes |
| Diagnostics indication LED |
| Group error SF (red) | Yes |
| Parameter |
| Remark | 7 |
| Output type/range | deactivated / 1 to 5 V / +/ -10 V / +/- 5 V |
| Diagnosis: short circuit | Disable / enable |
| Group diagnostics | Disable / enable |
| Behavior on CPU/Master STOP | Output current and de-energized/substitute a value/keep last value |
| Galvanic isolation |
| Galvanic isolation analog outputs |
| between the channels | No |
| between the channels and the backplane bus | Yes |
| between the channels and the load voltage L+ | Yes |
| Permissible potential difference |
| between MANA and M internally (UISO) | 75 VDC / 60 VAC |
| Dimensions |
| Width | 15 mm |
| Height | 81 mm |
| Depth | 52 mm |
| Weight |
| Weight, approx. | 40 g |
| Status | Mar 12, 2012 |
