6ES7147-6BG00-0AB0 - SIMATIC DP, ET 200ECO PN, 8 DIO 24V DC/1,3A; 8 X M12, DEGREE OF PROTECTION IP67 (siemens) - Quad Industry GmbH

Артикул: 6ES7147-6BG00-0AB0
Наименование: SIMATIC DP, ET 200ECO PN, 8 DIO 24V DC/1,3A; 8 X M12, DEGREE OF PROTECTION IP67 (siemens)
Производитель: Siemens


Наименование продукта
SIMATIC DP, ET 200ECO PN, 8 DIO 24V DC/1,3A; 8 X M12, DEGREE OF PROTECTION IP67
Жизненный цикл продукта
Разрешение на поставку Постепенное снятие продукта с производства Снятие продукта с производства Окончательное снятие продукта с производства
2009-06-30
SIMATIC DP, ET 200ECO PN, 8 DIO 24V DC/1,3A; 8 X M12, DEGREE OF PROTECTION IP67
General information
Vendor identification (VendorID) 002AH
Device identifier (DeviceID) 0306H
Supply voltage
24 V DC Yes
permissible range, lower limit (DC) 20.4 V
permissible range, upper limit (DC) 28.8 V
Reverse polarity protection Yes
Load voltage 2L+
Rated value (DC) 24 V
permissible range, lower limit (DC) 20.4 V
permissible range, upper limit (DC) 28.8 V
Reverse polarity protection Yes
Input current
from load voltage 1L+ (unswitched voltage) 4 A
from load voltage 2L+, max. 4 A
Encoder supply
Number of outputs 8
Output current, rated value 100 mA; per output
24 V encoder supply
Short-circuit protection Yes
Power losses
Power loss, typ. 6.5 W
Digital inputs
Number/binary inputs 8
In groups of 4
Input characteristic curve acc. to IEC 61131, Type 3 Yes
Number of simultaneously controllable inputs
all mounting positions
up to 60 °C, max. 8
Input voltage
Rated value, DC 24 V
for signal "0" -3 to +5 V
for signal "1" 11 to 30 V
Input current
for signal "0", max. (permissible quiescent current) 1.5 mA
for signal "1", typ. 7 mA
Input delay (for rated value of input voltage)
for standard inputs
at "0" to "1", max. typically 3 ms
at "1" to "0", max. typically 3 ms
Cable length
Cable length unshielded, max. 30 m
Digital outputs
Number/binary outputs 8
In groups of 4
Functionality/short-circuit strength Yes; Electronic
Response threshold, typ. 1.8 A
Limitation of inductive shutdown voltage to Typ. (L1+, L2+) -47 V
Switching capacity of the outputs
on lamp load, max. 5 W
Controlling a digital input Yes
Output current
for signal "1" rated value 1.3 A; Maximum
for signal "0" residual current, max. 1.5 mA
Parallel switching of 2 outputs
for increased power No
for redundant control of a load Yes
Switching frequency
with resistive load, max. 100 Hz
with inductive load, max. 0.5 Hz
on lamp load, max. 1 Hz
Aggregate current of outputs (per group)
all mounting positions
up to 60 °C, max. 3.9 A
Cable length
Cable length unshielded, max. 30 m
Interfaces
Transmission procedure 100BASE-TX
Transmission rate, max. 100 Mbit/s
Supports protocol for PROFINET IO
Number of PROFINET interfaces 2
Autocrossing Yes
Automatic detection of transmission speed Yes
Integrated switch Yes
PROFINET IO Device
IRT with the option "high flexibility" supported Yes
Prioritized startup supported Yes
Protocols
Supports protocol for PROFINET IO Yes
Protocols (Ethernet)
SNMP Yes
DCP Yes
LLDP Yes
ping Yes
arp Yes
Interrupts/diagnostics/status information
Status indicator Yes; Green LED
Alarms
Diagnostic alarm Yes
Diagnostic messages
Diagnostic functions Yes
Diagnostic information readable Yes
Monitoring the supply voltage Yes; Green "ON" LED
Wire break in actuator cable Yes
Wire break in signal transmitter cable Yes
Short circuit Yes
Short circuit encoder supply Yes
Group error Yes; Red/yellow "SF/MT" LED
Galvanic isolation
between the load voltages Yes
between load voltage and all other switching components No
between Ethernet and electronics Yes
Galvanic isolation digital inputs
between the channels No
Galvanic isolation digital outputs
between the channels No
Permissible potential difference
between different circuits 75 VDC / 60 VAC
Isolation
tested with
24 V DC circuits 500 V
Interface 1500 V; According to IEEE 802.3
Degree and class of protection
IP65 Yes
IP66 Yes
IP67 Yes
Connection method
M12 Yes
Dimensions
Width 60 mm
Height 175 mm
Depth 49 mm
Weight
Weight 910 g
Status Mar 12, 2012

Назад в раздел