| | Similar to image | | SURGE ARRESTER TYPE 3 REQUIREMENT CATEGORY D RATED VOLTAGE UN 230V UC DC275V/AC253V, 4POLE FOR 3PHASE POWER SUPPLY |
| |
| Technical data: | | |
| Protection level | kV | 1,200 |
| Type of the power supply network | | 4 |
| Type of mounting | | standard mounting rail |
| Conductor cross section that can be connected / for rigid conductor / minimum | mm? | 0.2 |
| Conductor cross section that can be connected / for rigid conductor / maximum | mm? | 2.5 |
| Conductor cross section that can be connected / finely stranded / minimum | mm? | 0.2 |
| Conductor cross section that can be connected / finely stranded / maximum | mm? | 4 |
| Product component / remote-signaling contact | | Yes |
| Size of the surge arrester | | 2 TE |
| Continuous operating voltage / with AC / maximum | V | 335 |
| Discharge current / at (8/20) µs / nominal value | kA | 1.5 |
| Operating voltage / with AC / nominal value | V | 400 |
| Type of distribution system | | other |
| SPD classification / acc. to EN 61643-11 / test class II type 2 | | No |
| Protection level / between N and L | kV | 1,200 |
| Protection level / between PE and N and/or L | kV | 1,200 |
| Signal design | | optical |
| |
| Certificates/approvals: |
| |
| |
| |
| last change: | Aug 26, 2011 |