| | Similar to image | | SURGE ARRESTER TYPE 2 REQUIREMENT CATEGORY C, UC 350V PLUG-IN PROTECTION BLOCKS 3-POLE, 3+0 CIRCUIT FOR TNC SYSTEMS NARROW DESIGN |
| |
| Technical data: | | |
| Protection level | kV | 1.4 |
| Type of the power supply network | | 3 |
| Type of mounting | | standard mounting rail |
| Conductor cross section that can be connected / for rigid conductor / minimum | mm? | 1.5 |
| Conductor cross section that can be connected / for rigid conductor / maximum | mm? | 35 |
| Conductor cross section that can be connected / finely stranded / minimum | mm? | 1.5 |
| Conductor cross section that can be connected / finely stranded / maximum | mm? | 25 |
| Product component / remote-signaling contact | | No |
| Size of the surge arrester | | other |
| Continuous operating voltage / with AC / maximum | V | 350 |
| Discharge current / at (8/20) µs / nominal value | kA | 40 |
| Operating voltage / with AC / nominal value | V | 240 |
| Type of distribution system | | TN-C |
| SPD classification / acc. to EN 61643-11 / test class II type 2 | | Yes |
| Protection level / between N and L | kV | 1.4 |
| Protection level / between PE and N and/or L | kV | 1.4 |
| Signal design | | optical |
| |
| Certificates/approvals: |
| |
| |
| |
| last change: | Aug 26, 2011 |