| | POSITION SWITCH WITH TUMBLER MOULDING, 4 APPROACH DIR.,24VDC MAGNETIC-LOCKED, 2NC+2NC 2X PG13.5 , 2NC+2NC ASI-F ADAPTER SAFETY AT WORK CH1 AN11A.32,12 JUMPERED ON 31 CH2 AN21A.42,22 JUMPERED ON 41 |
| General technical details: | |
| Product designation | communication-capable position switch |
| Active principle | mechanical |
| Product function / Status display | No |
| Design of the interface / for fail-safe communication | with AS-Interface F-adapter, direct connection ASIsafe |
| Locking pressure | 2000 N |
| Product equipment / Escape unlocking | No |
| | |
| Enclosure: | |
| Design of the housing | block, EN 50041 |
| Design of the housing / according to standard | Yes |
| Coating / of the housing | painted |
| Material / of the housing | metal |
| Width of the sensor | 90 mm |
| | |
| Drive Head: | |
| Design of the operating mechanism | separate actuator |
| Design of the switching function | positive opening |
| | |
| Contact: | |
| Design of the contact element | slow-action contacts |
| Number of NC contacts / for auxiliary contact | 4 |
| Number of NO contacts / for auxiliary contact | 0 |
| Design of the electrical connection | AS-i insulation displacement method |
| | |
| Ambient conditions: | |
| Ambient temperature | |
| | -25 °C |
| | 60 °C |
| Protection class IP | IP65 |
| | |
| Certificates/approvals: | |
| varification of suitability | UL / CSA |
| Acceptability for application / Safety cut-out switch | Yes |
| | |
| | |
| |
| |
| last change: | 10/31/2006 |
