| POSITION SWITCH 3SE51, METAL ENCLOSURE 40MM TO EN50041 1NO/1NC SNAP-ACTION CONTACTS W. M12 CONNECTOR, 5-POLE, FIXED PIN ASSIGNMENT: PIN1=21, PIN2=22, PIN3=13, PIN4=14, PIN5=PE WITH ROLLER PLUNGER, 30 N ACTUATING/RESTORING FORCE |
| Manufacturer article number | | |
- of the basic unit included in the scope of supply
| | 3SE5114-0CA00-1AL0 |
- of the actuator head for position switches included in the scope of supply
| | 3SE5000-0AD02 |
| |
| General technical details: | | |
| product designation | | basic switch for standard position schwitches |
| Insulation voltage | | |
| | V | 125 |
| Degree of pollution | | class 3 |
| Thermal current | A | 4 |
| Operating current | | |
| | | |
| | A | 4 |
| | A | 4 |
| | | |
| | A | 3 |
| | A | 0.55 |
| Continuous current | | |
- of the slow DIAZED fuse link
| A | 4 |
- of the quick DIAZED fuse link
| A | 4 |
- of the C characteristic circuit breaker
| A | 1 |
| Mechanical operating cycles as operating time | | |
| | | 15,000,000 |
| Electrical operating cycles as operating time | | |
- with contactor 3RH11, 3RT1016, 3RT1017, 3RT1024, 3RT1025, 3RT1026 / typical
| | 10,000,000 |
| Electrical operating cycles in one hour | | |
- with contactor 3RH11, 3RT1016, 3RT1017, 3RT1024, 3RT1025, 3RT1026
| | 6,000 |
| Repeat accuracy | mm | 0.05 |
| Design of the contact element | | snap-action contacts |
| Number of NC contacts | | |
| | | 1 |
| Design of the switching function | | positive opening |
| Number of NO contacts | | |
| | | 1 |
| Resistance against vibration | | 0.35 mm / 5g |
| Resistance against shock | | 30g / 11 ms |
| Ambient temperature | | |
| | °C | -25… 85 |
| | °C | -40… 90 |
| Product specification | | |
| | | EN 50041 |
| Width of the sensor | mm | 40 |
| material | | |
| | | metal |
| Material / of the housing / of the switch head | | metal |
| Design of the operating mechanism | | stainless steel roller |
| Actuating speed | mm/s / m/s | 0.1… 1 |
| Minimum actuating force / in activation direction | N | 30 |
| Protection class IP | | IP66/IP67 |
| Built in orientation | | any |
| design of the cable entry (gland) | | M12 plug |
| Design of the electrical connection | | M12 plug, fixed |
| Design of the plug-in connection | | M12 plug, 5-pole: Pin 1 = terminal 21, Pin 2 = 22, Pin 3 = 13, Pin 4 = 14, Pin 5 = PU |
| Item designation | | |
- according to DIN 40719 extendable after IEC 204-2
| | S |
- according to DIN EN 61346-2
| | B |
| |
| Certificates/approvals: | | |
| General Product Approval | Test Certificates | | ROSTEST | | | |
| | |
| |
| last change: | Oct 21, 2011 |
