| | HINGE SWITCHES ENCLOSED IN MOLDED PLASTIC, 1NO+1NC, HOLLOW SHAFT, DI = 8MM, M20 X 1.5 |
| |
| General technical details: |
| product designation | | safety position switch |
| Active principle | | mechanical |
| Product function / status display | | No |
| Item designation / according to DIN 40719 extendable after IEC 204-2 / according to IEC 750 | | S |
| Item designation / according to DIN EN 61346-2 | | B |
| |
| Enclosure: |
| Design of the housing | | design complying with EN 50047 |
| Design of the housing / according to standard | | Yes |
| material / of the housing | | glass fiber reinforced thermoplast |
| Length of the sensor | mm | 79 |
| Width of the sensor | mm | 31 |
| |
| Drive Head: |
| Design of the operating mechanism | | hollow shaft |
| |
| Contact: |
| Design of the contact element | | snap-action contacts |
| Number of NC contacts / for auxiliary contacts | | 1 |
| Number of NO contacts / for auxiliary contacts | | 1 |
| Number of change-over switches / for auxiliary contacts | | 0 |
| Design of the switching function | | positive opening |
| Design of the electrical connection | | screw-type terminals |
| |
| Ambient conditions: |
| Protection class IP | | IP67 |
| |
| Certificates/approvals: |
| Verification of suitability | | CE / UL / CSA / CCC |
| Acceptability for application / safety cut-out switch | | Yes |
| Ambient temperature | | |
| | °C | 85… -30 |
| |
| | |
| |
| last change: | Feb 27, 2012 |
