| | POSITION SWITCH, METAL SNAP-ACTION CONTACTS 2NC, IP 67 ROD ACTUATOR (MOULDED PLASTIC) CABLE GLAND 1X (M20 X 1.5) |
| |
| General technical details: |
| product designation | | position switch |
| Active principle | | mechanical |
| Product function / status display | | No |
| Item designation / according to DIN 40719 extendable after IEC 204-2 / according to IEC 750 | | S |
| Item designation / according to DIN EN 61346-2 | | B |
| |
| Enclosure: |
| Design of the housing | | block, wide |
| Design of the housing / according to standard | | No |
| Coating / of the housing | | painted |
| material / of the housing | | metal |
| Length of the sensor | mm | 273.5 |
| Width of the sensor | mm | 56 |
| |
| Drive Head: |
| Design of the operating mechanism | | rod actuator |
| Norm designation of the switching head | | EN 50041, design D |
| |
| Contact: |
| Design of the contact element | | snap-action contacts |
| Number of NC contacts / for auxiliary contacts | | 2 |
| Number of NO contacts / for auxiliary contacts | | 0 |
| Number of change-over switches / for auxiliary contacts | | 0 |
| Design of the switching function | | CO contact |
| Design of the electrical connection | | screw-type terminals |
| |
| Ambient conditions: |
| Protection class IP | | IP67 |
| |
| Certificates/approvals: |
| Verification of suitability | | CE / UL / CSA / CCC |
| Acceptability for application / safety cut-out switch | | No |
| Ambient temperature | | |
| | °C | 85… -30 |
| General Product Approval | For use in hazardous locations | Test Certificates | | | |
| | |
| |
| last change: | Oct 24, 2011 |
