| | MOTOR STARTER ECOFAST RSE 4DI PROFIBUS DP MECH. SWITCHING ELECTR. UE PROTECTION 3-PH 400 V/1.1 KW 0.30 A...3.00 A WITHOUT BRAKE CONTACT 4DI 24 V DC HAN Q4/2 - HAN 1NC |
| |
| General details: |
| Design of the product | | reversing starter |
| Product function / bus-communication | | Yes |
| Protocol / will be supported / PROFIBUS DP protocol | | Yes |
| Protocol / will be supported / AS interface protocol | | No |
| Product component / outlet for enine brake | | No |
| Type of assignement | | 1 |
| Item designation / according to DIN EN 61346-2 | | Q |
| Item designation / according to DIN 40719 extendable after IEC 204-2 / according to IEC 750 | | A |
| Width | mm | 130 |
| Height | mm | 250 |
| Depth | mm | 107 |
| |
| Control circuit: |
| type of voltage | | DC |
| Control supply voltage | | |
- for DC / rated value / minimum
| V | 20.4 |
- for DC / rated value / maximum
| V | 28.8 |
| |
| Main circuit: |
| Type of the motor protection | | solid-state |
| Design of the switching contact | | mechanical |
| Design of the short-circuit protection | | fuse |
| Operating voltage / rated value | | |
| | V | 400 |
| | V | 500 |
| Service power | | |
- at AC-3 / at 400 V / rated value
| W | 1,100 |
- for three-phase servomotors / at 400 V / at 50 Hz / for AC three-phase / minimum
| kW | 0.14 |
- for three-phase servomotors / at 400 V / at 50 Hz / for AC three-phase / maximum
| kW | 1.1 |
| Adjustable response current / of the current-dependent overload release | | |
| | A | 0.3 |
| | A | 3 |
| Breaking capacity limit short-circuit current (lcu) / at 400 V / rated value | kA | 100 |
| |
| Connection type: |
| Design of the electrical connection / for main current circuit | | tab terminals |
| |
| Ambient conditions: |
| Protection class IP | | IP65 |
| Ambient temperature | | |
| | °C | -20… +40 |
| |
| Certificates/approvals: | | |
| |
| | |
| |
| last change: | Feb 6, 2012 |
