| AS-INTERFACE COMPACT MOD. IP67 DIGITAL, 4A 4 X 1 OUTP.,ELECTR., 2A, DC 24V 4 X M12 STANDARD SOCKET TO CONNECT OUTPUTS MOUNTING PLATE 3RK19010CA0 TO BE ORDERED SEPARATELY |
| |
| General technical data: |
| Design of the product | | digital I/O modules for operation in the field, IP67 - K60 |
| Type | | 4 outputs |
| Design of the slave type | | standard slave |
| I/O configuration | | 8 |
| ID/ID2 code | | 1/F |
| Number / I/O sockets | | 4 |
| Design of the electrical connection / of the inputs and outputs | | M12 screw-type terminals |
| AS interface / total current input / max | mA | 270 |
| operating voltage | | |
- according to AS-Interface spezification
| V | 26.5… 31.6 |
| Ground terminal | | PIN5 of each M12 socket is connected to the grounding wrist strap in the mounting plate using a pin |
| Addressing | | front addressing socket |
| Delivery note | | the modules are delivered without mounting plate |
| Note 1 | | All K60 compact modules are delivered with stainless steel screws/sockets |
| Note 2 | | An external additional supply (AUX POWER) of 20 to 30 V DC is required for the supply of the output circuits. The additional supply must comply with VDE 0106 (PELV), protection class III. |
| |
| Sensor supply: |
| Input voltage | V | 20… 30 |
| Current carrying capacity / of the sensor supply / for all inputs | | |
- at ambient temperature 40 °C
| mA | 200 |
| |
| Inputs: |
| Number of digital inputs | | 0 |
| type of the connection technology | | 2 and 3-conductor technology |
| Input circuit | | PNP transistor |
| Type of voltage / of the input voltage | | DC |
| Inputs / switching level High / min | V | 10 |
| Input current / at the digital input | | |
| | mA | 6 |
| | mA | 1.5 |
| Inputs | | |
- sensor supply using AS-Interface
| | short-circuit and overload resistant |
| Design of the pin assignment / of the inputs | | Y-II assignement |
| |
| Outputs: |
| Number of digital outputs | | 4 |
| Type of voltage / of the outputs | | DC |
| Outputs / external power supply 24 V DC | | using black AS-Interface flat cable |
| Output current / at the digital output / for signal <1> / nominal value | A | 2 |
| Outputs / aggregate current / max | A | 4 |
| Design of the switching output | | PNP transistor |
| Design of the pin assignment / of the outputs | | Y-II assignement |
| Outputs / socket assignment | | 3 = "-", 2/4 = output, 5 = ground terminal |
| Characteristic feature of the output / short-circuit protected | | Yes |
| Outputs | | |
| | | built-in |
| | | built-in |
| | | built-in |
| |
| Assignment of the data bits: |
| Assignment of data bits | | |
| | | not assigned (closed) |
| | | not assigned (closed) |
| | | not assigned (closed) |
| | | not assigned (closed) |
| | | PIN4 = OUT1 (D0), PIN2 = OUT2 (D1) |
| | | PIN4 = OUT2 (D1) |
| | | PIN4 = OUT3 (D2), PIN2 = OUT4 (D3) |
| | | PIN4 = OUT4 (D3) |
| |
| Ambient conditions: |
| Ambient temperature | | |
| | °C | -25… 85 |
| | °C | -40… 85 |
| Protection class IP | | IP67 |
| |
| Status display: |
| Status display / display of I/Os | | yellow LED |
| Status display / display of Uaux | | green LED |
| Status display / display of AS-Interface/diagnostics | | green/red LED |
| |
| Mechanical design: |
| Width | mm | 60 |
| Height | mm | 152 |
| Depth | mm | 29 |
| Type of mounting | | standard rail mounting/wall mounting using mounting plate for K60 compact module |
| |
| Certificates/approvals: |
| AS-Interface certificate | | yes (or requested for in case of new units) |
| Approvals | | UL, CSA, shipbuilding (or requested for in case of new units) |
| |
| | |
| | |
| |
| last change: | Oct 31, 2011 |
