| | ET 200PRO ASM 400V DISCONNECT MODULE 400V TO 25A FOR SAFE DISCONNECTION UP TO CAT. 3/4 HAN Q4/2 |
| |
| General technical data: |
| product brand name | | SIRIUS |
| product designation | | ET 200pro motor starters |
| Design of the product | | safety disconnecting module |
| Product function | | |
| | | Yes |
| | | No |
| | | No |
| Product component / outlet for enine brake | | No |
| Type of assignement | | 1 |
| Product equipment | | |
- brake control with 400 V AC
| | No |
- brake control with 230 V AC
| | No |
- brake control with 24 V DC
| | No |
- brake control with 180 V DC
| | No |
- brake control with 500 V DC
| | No |
| Impulse voltage resistance / rated value | kV | 6 |
| Maximum permissible voltage for safe disconnection / between main circuit and auxiliary circuit | V | 400 |
| Item designation | | |
- according to DIN EN 61346-2
| | Q |
- according to DIN 40719 extendable after IEC 204-2 / according to IEC 750
| | A |
| Type of mounting | | screw fixing |
| Depth | mm | 150 |
| Height | mm | 230 |
| Width | mm | 110 |
| |
| Main circuit: |
| Operating voltage | | |
| | V | 400… 500 |
| Adjustable response current | | |
- of the current-dependent overload release
| A | 25… 25 |
| Operating current / at AC-3 / at 400 V / rated value | A | 25 |
| Number of poles / for main current circuit | | 3 |
| |
| Control circuit: |
| Type of voltage / of the controlled supply voltage | | DC |
| Control supply voltage / 1 / for DC | V | 24 |
| Control supply voltage / 1 / for DC / rated value | | |
| | V | 20.4 |
| | V | 28.8 |
| |
| Supply voltage: | | |
| Type of voltage / of supply voltage | | DC |
| Supply voltage / 1 / for DC | V | 24 |
| Supply voltage / 1 / for DC / rated value | | |
| | V | 20.4 |
| | V | 28.8 |
| |
| Ambient conditions: |
| Protection class IP | | IP65 |
| Ambient temperature | | |
| | °C | -25… +55 |
| | °C | -40… +70 |
| | °C | -40… +70 |
| Relative humidity | | |
| | % | 5… 95 |
| Resistance against vibration | | 2g |
| Resistance against shock | | 15g / 11 ms |
| Degree of pollution | | 3 |
| Installation altitude / at a height over sea level / maximum | m | 3,500 |
| Built in orientation | | any |
| |
| Communication: | | |
| Protocol / will be supported | | |
| | | Yes |
| | | Yes |
| | | No |
| Design of the interface / PROFINET protocol | | Yes |
| Design of the electrical connection / of the communication interface | | via backplane bus |
| |
| Connections: | | |
| Number of digital inputs | | 0 |
| Number of sockets | | |
- for digital input signals
| | 0 |
- for digital output signals
| | 0 |
| Product function | | |
- digital inputs parameterizable
| | No |
- digital outputs parameterizable
| | No |
| Design of the electrical connection | | |
- 1 / for digital input signals
| | M12 socket |
- 2 / for digital input signals
| | M12 socket |
- 3 / for digital input signals
| | M12 socket |
- 4 / for digital input signals
| | M12 socket |
- at the manufacturer-specific device interface
| | optical interface |
| | | socket according to ISO23570 |
| | | socket according to ISO23570 |
- for main energy transmission
| | socket according to ISO23570 |
- for supply voltage infeed
| | via backplane bus |
- for supply voltage transmission
| | via backplane bus |
| | | tab terminals |
| Verification of suitability | | CE / UL / CSA / CCC |
| Protection against electrical shock | | finger-safe |
| |
| Certificates/approvals: | | |
| General Product Approval | Declaration of Conformity | Test Certificates | | | |
| | |
| |
| last change: | Mar 27, 2012 |
