7TAA2
| Àðòèêóë |
Íàèìåíîâàíèå |
Ïðîèçâîäèòåëü |
|
7TAA266130R0675
|
COMPRESSION TERMINAL-EHV (Aluminum Compression Substation Terminal (Straight) - Cable to Pad - 1000-1113 AAC 954 (24/7,54/7), 1033.5 (36/1,45/7) ACSR to 3 inch X 3 Inch 4 hole Pad. EHV - Extra High Voltage (230kV-500kV))
|
ABB
|
|
7TAA266130R0674
|
COMPRESSION TERMINAL-EHV (Aluminum Compression Substation Terminal (Straight) - Cable to Pad - 1000-1113 AAC 954 (24/7,54/7), 1033.5 (36/1,45/7) ACSR to 4 inch X 4 Inch 4 hole Pad. EHV - Extra High Voltage (230kV-500kV))
|
ABB
|
|
7TAA266130R0672
|
COMPRESSION TERMINAL FOR 954 AAC (Aluminum Compression Terminal, Cable to Pad - 4 inch 4-Hole NEMA Flat. Type ACL. 45 Degree Bend. Conductor Size AAC 954. Diameter 1.843 inch, Dimensions - Overall Length 12 inch, Barrel 6 inch, Width 4 inch, Thickness 1/2 inch. Connector pad is finished on both sides. Part number and Die size are marked on connector. Connector is sipplied pre-filled with oxide inhibitor.)
|
ABB
|
|
7TAA266130R0671
|
COMPRESSION TERMINAL FOR 4/0 AAC (Aluminum Compression Substation Terminal (Straight) - Cable to Pad - 4/0 AAC 3/0 (6/1) ACSR to 4 inch X 4 inch 4 hole Pad.)
|
ABB
|
|
7TAA266130R0668
|
COMPRESSION TERMINAL (Aluminum Compression Terminal, Cable to Pad - 2-Hole NEMA Flat. Type ACL. Conductor Size AAC 954. Diameter 1.843 inch, Dimensions - Overall Length 11 inch, Barrel 6 inch, Width 2 inch, Thickness 5/8 inch. Connector pad is finished on both sides. Part number and Die size are marked on connector. Connector is sipplied pre-filled with oxide inhibitor.)
|
ABB
|
|
7TAA266130R0667
|
COMPRESSION TERMINALS (2) 795 ACSR (Aluminum Compression Substation Terminal - 2 Cables to Pad - Straight - 2 Piece - 230kV Maximum - 874.5-900 AAC 715.5 (30/19), 795 (24/7,54/7,26/7),874.5 (36/1) ACSR to 4X4 inch, 4-hole Pad)
|
ABB
|
|
7TAA266130R0666
|
COMPRESSION TERMINALS (Aluminum Compression Substation Terminal - 2 Cables to Pad - 45 Degree Bend - 2 Piece - 230kV Maximum - 1700 AAC 1510.5 (54/19), 1590 (45/7) ACSR to 4X4 inch, 4-hole Pad)
|
ABB
|
|
7TAA266130R0665
|
2 WIRE ALUMINUM WELDED TERMINAL (Aluminum Welded Substation Terminal - 2 Cables to Pad - Straight - Side-formed Pad - 230kV Maximum - 1900-2000 AAC 1780 (72/7,84/19) ACSR to 6X4 inch Narrow, 4-hole Pad, Bent at 90 Degrees)
|
ABB
|
|
7TAA266130R0664
|
COMPRESSION TERMINALS (Aluminum Compression Substation Terminal - 2 Cables to Pad - Straight - 2 Piece - 230kV Maximum - 1700 AAC 1510.5 (54/19), 1590 (45/7) ACSR to 4X4 inch, 4-hole Pad)
|
ABB
|
|
7TAA266130R0662
|
COMPRESSION TERMINALS (Aluminum Compression Substation Terminal - 2 Cables to Pad - 90 Degree Bend - 2 Piece - 230kV Maximum - 1700 AAC 1510.5 (54/19), 1590 (45/7) ACSR to 4X4 inch, 4-hole Pad)
|
ABB
|
|
7TAA266130R0661
|
COMPRESSION TERMINAL (Aluminum Compression Terminal, Cable to Pad - 4 inch 4-Hole NEMA Flat. Type ACL. 90 Degree Bend. Conductor Size AAC 874.5 - 900, ASCR 715.5, 795, 874.5. Diameter 1.843 inch, Dimensions - Overall Length 12 inch, Barrel 6 inch, Width 4 inch, Thickness 1/2 inch. Connector pad is finished on both sides. Part number and Die size are marked on connector. Connector is sipplied pre-filled with oxide inhibitor.)
|
ABB
|
|
7TAA266130R0660
|
ALUM WELDED EXP. TERMINAL (Welded Aluminum, Type AWEPF, Weld Expansion Terminal Pipe to Side Formed Flat. 4 Inch 4-Hole NEMA Flat. SPS 2. 4 inch X 1-1/8 inch X 4 Inch X 1-2/4 inch. Amps 1155. For Schedule 80 Pipe. All pads are finished on both sides.)
|
ABB
|
|
7TAA266130R0659
|
ALUM WELDED EXP. TERMINAL (Welded Aluminum, Type AWEPC, Weld Expansion Terminal Pipe to Center Formed Flat. 4 Inch 4-Hole NEMA Flat. SPS 2. 12-1/2 maximum height X 14 Length X 1 inch thick. Amps 1155. For Schedule 80 Pipe. All pads are finished on both sides.)
|
ABB
|
|
7TAA266130R0658
|
WELDED EXPANSION TERMINAL (Welded Aluminum, Type AWEPC, Weld Expansion Terminal Pipe to Center Formed Flat. 3 Inch 4-Hole NEMA Flat. SPS 2. 12-1/2 maximum height X 14 Length X 1 inch thick. Amps 1155. For Schedule 80 Pipe. All pads are finished on both sides.)
|
ABB
|
|
7TAA266130R0657
|
WELDED TERMINAL (Weld Aluminum. Weld Terminal, Pipe to Flat. 2-Hole NEMA Flat. Pipe Size 3 inch. Parts are designed for use with either Schedule 40 or 80 pipe. All pads are finished on both sides. D is for Contact surface on center line of Bus.)
|
ABB
|
|
7TAA266130R0656
|
COMPRESSION TERMINAL, SHORT BARREL (Aluminum Compression Terminal - Short Barrel Cable to Pad - 3 Inch 4-Hole NEMA Flat. Type ACLS. Conductor Size AAC 550 - 556.5, ACSR 477. Die Diameter 1.312. Dimensions - Barrel 3 inch, Length 7-1/2 inch, width 3 inch, Thickness 5/16 inch. Connector pad is finished on both sides, Part number and die size are marked on connector, Connector is supplied pre-filled with oxide inhibitor.)
|
ABB
|
|
7TAA266130R0655
|
COMPRESSION TERMINALS-ACSS (Aluminum Compression Terminal, Two for 1192.5 AAC to a 4 inch X 4 inch, 4-Hole Pad)
|
ABB
|
|
7TAA266130R0654
|
COMPRESSION TERMINAL-ACSS (Aluminum Compression Terminal, for 1192.5 ACSS to a 4 inch X 4 inch, 4-Hole Pad)
|
ABB
|
|
7TAA266130R0653
|
COMPRESSION TERMINAL (Aluminum Compression Terminal, Cable to Pad - 3 inch 4-Hole NEMA Flat. Type ACL. 15 Degree Bend. Conductor Size AAC 550 - 556.5. ACSR 447. Diameter 1.312 inch, Dimensions - Overall Length 9-1/2 inch, Barrel 5 inch, Width 3 inch, Thickness 5/16 inch. Connector pad is finished on both sides. Part number and Die size are marked on connector. Connector is sipplied pre-filled with oxide inhibitor.)
|
ABB
|
|
7TAA266130R0652
|
WELDED TERMINAL (Aluminum Welded Substation Terminal - Cable to Pad - 230kV Maximum - 397.5-400 AAC 336.4 (26/7,30/7), 397.5 (18/1) ACSR to 4X4 inch, 4-hole Pad)
|
ABB
|
|
7TAA266130R0651
|
ALUM WELDED TERMINAL 3 CABLES (Aluminum Welding Terminal, for Three Cables to Flat, 750-800 AAC, 4 X 4 inch 4 Hole Pad)
|
ABB
|
|
7TAA266130R0649
|
EXPANSION TERMINAL (Aluminum Welded Substation Terminal - Pipe to Pad - Expansion Style - Center-formed Pad Parallel to Shunt Plane - 230kV Maximum - 6 inch NPS Pipe to 6X4 inch, 6-hole Pad, 90 Degree Bend, H - Schedule 80 Pipe)
|
ABB
|
|
7TAA266130R0647
|
EXPANSION TERMINAL (Aluminum Welded Substation Terminal - Pipe to Pad - Expansion Style - Center-formed Pad Parallel to Shunt Plane - 230kV Maximum - 5 inch NPS Pipe to 6X4 inch, 6-hole Pad, 90 Degree Bend, H - Schedule 80 Pipe)
|
ABB
|
|
7TAA266130R0646
|
WELDED TERMINAL (Weld Aluminum. Weld Terminal, Pipe to Flat. 3 inch 4-Hole NEMA Flat. 45 Degree Bend. Pipe Size 3 inch. Parts are designed for use with either Schedule 40 or 80 pipe. All pads are finished on both sides.)
|
ABB
|
|
7TAA266130R0645
|
COMPRESSION TERMINAL, SHORT BARREL (Aluminum Compression Terminal - Short Barrel Cable to Pad - 4 Inch 4-Hole NEMA Flat. Type ACLS. Conductor Size AAC 954. Die Diameter 1.843. Dimensions - Barrel 5 inch, Length 11 inch, width 4 inch, Thickness 1/2 inch. Connector pad is finished on both sides, Part number and die size are marked on connector, Connector is supplied pre-filled with oxide inhibitor.)
|
ABB
|
|
7TAA266130R0643
|
COMPRESSION TERMINALS (Aluminum Compression Substation Terminal - 2 Cables to Pad - 90 Degree Bend - 2 Piece - 230kV Maximum - 795-800 AAC 636 (30/7,30/19), 666 (26/7),715.5 (24/7,54/7) ACSR to 4X4 inch, 4-hole Pad)
|
ABB
|
|
7TAA266130R0642
|
COMPRESSION TERMINAL (Aluminum Compression Substation Terminal - 2 Cables to Pad - Straight - 2 Piece - 230kV Maximum - 795-800 AAC 636 (30/7,30/19), 666 (26/7),715.5 (24/7,54/7) ACSR to 4X4 inch, 4-hole Pad)
|
ABB
|
|
7TAA266130R0641
|
WELDED TERMINAL (Weld Aluminum. 45 Degree Weld Terminal, 2 Cables to 4 inch 4-Hole NEMA Flat. Cable Size AAC 1000 - 1033.5, ACSR 900, 954. Cable Diameter 1.152 - 1.196. Thickness 5/8 inch. All Pads are finished on both sides.)
|
ABB
|
|
7TAA266130R0640
|
ALUMINUM COMPRESSION TERMINAL (Aluminum Compression Substation Terminal (Straight) - Cable to Pad - 2250 AAC 2167 (72/7) ACSR to 3 inch X 4 inch 4 hole Pad. Tin Plated)
|
ABB
|
|
7TAA266130R0638
|
COMPRESSION TERMINAL (Aluminum Compression Terminal, Cable to Pad - 2-Hole NEMA Flat. Type ACL. Conductor Size ACSR 2. Diameter 0.640 inch, Dimensions - Overall Length 6-1/4 inch, Barrel 2 inch, Width 1-3/16 inch, Thickness 1/4 inch. Connector pad is finished on both sides. Part number and Die size are marked on connector. Connector is sipplied pre-filled with oxide inhibitor.)
|
ABB
|
Òîâàðû
14371 - 14400 èç 23691
Íà÷àëî
|
Ïðåä.
|
478
479
480
481
482
|
Ñëåä. |
Êîíåö
|
