7TAA2
| Àðòèêóë |
Íàèìåíîâàíèå |
Ïðîèçâîäèòåëü |
|
7TAA207400R0073
|
FCI, ADAPT TRIP, 24HR RESET (Series 1548 Overhead Faulted Circuit Indicators. (Model F) Standard Offering, reclose dead time of 150 msec. (loss of current greater than 150 msec.), 3 Amp minimum load current required for reset. (Factory Code H). (Trip/Inrush Logic Option B) Adaptive Trip requires 60 second continuous minimum load current, arming time less than 1/4 cycle fault current, loss of current within 60 second of fault current, with 24 ms plus/minus 20 percent delay trip - backfeed restraint. (Trip/Current Option N) 100 Amp di/dt adaptive trip, Note 3 Amp minimum load required. (Reset Time-Delay Option P) 24 hour automatic. (Factory Code 3). (Indicator Option L) Single ultra bright LED standard for applications up to 69kV maximum. (Transmitter Phase Encoder Option N) No Transmitter. (Factory Code A).)
|
ABB
|
|
7TAA207400R0072
|
FCI,BK. FEED,100A DI/DT,RADI0 (Series 1548 Overhead Faulted Circuit Indicators. (Model F) Standard Offering, reclose dead time of 150 msec. (loss of current greater than 150 msec.), 3 Amp minimum load current required for reset. (Factory Code H). (Trip/Inrush Logic Option B) Adaptive Trip requires 60 second continuous minimum load current, arming time less than 1/4 cycle fault current, loss of current within 60 second of fault current, with 24 ms plus/minus 20 percent delay trip - backfeed restraint. (Trip/Current Option N) 100 Amp di/dt adaptive trip, Note 3 Amp minimum load required. (Reset Time-Delay Option N) 4 hour automatic. (Factory Code 3). (Indicator Option R) Radio with single LED for applications up to 69kV. (Transmitter Phase Encoder Option C) Phase C. (Factory Code A).)
|
ABB
|
|
7TAA207400R0071
|
FCI,BK. FEED,100A DI/DT,RADI0 (Series 1548 Overhead Faulted Circuit Indicators. (Model F) Standard Offering, reclose dead time of 150 msec. (loss of current greater than 150 msec.), 3 Amp minimum load current required for reset. (Factory Code H). (Trip/Inrush Logic Option B) Adaptive Trip requires 60 second continuous minimum load current, arming time less than 1/4 cycle fault current, loss of current within 60 second of fault current, with 24 ms plus/minus 20 percent delay trip - backfeed restraint. (Trip/Current Option N) 100 Amp di/dt adaptive trip, Note 3 Amp minimum load required. (Reset Time-Delay Option N) 4 hour automatic. (Factory Code 3). (Indicator Option R) Radio with single LED for applications up to 69kV. (Transmitter Phase Encoder Option B) Phase B. (Factory Code A).)
|
ABB
|
|
7TAA207400R0070
|
FCI,BK. FEED,100A DI/DT,RADI0 (Series 1548 Overhead Faulted Circuit Indicators. (Model F) Standard Offering, reclose dead time of 150 msec. (loss of current greater than 150 msec.), 3 Amp minimum load current required for reset. (Factory Code H). (Trip/Inrush Logic Option B) Adaptive Trip requires 60 second continuous minimum load current, arming time less than 1/4 cycle fault current, loss of current within 60 second of fault current, with 24 ms plus/minus 20 percent delay trip - backfeed restraint. (Trip/Current Option N) 100 Amp di/dt adaptive trip, Note 3 Amp minimum load required. (Reset Time-Delay Option N) 4 hour automatic. (Factory Code 3). (Indicator Option R) Radio with single LED for applications up to 69kV. (Transmitter Phase Encoder Option A) Phase A. (Factory Code A).)
|
ABB
|
|
7TAA207400R0069
|
FAULT INDICATOR (Series 1548 Overhead Faulted Circuit Indicators. (Model F) Standard Offering, reclose dead time of 150 msec. (loss of current greater than 150 msec.), 3 Amp minimum load current required for reset. (Factory Code H). (Trip/Inrush Logic Option B) Adaptive Trip requires 60 second continuous minimum load current, arming time less than 1/4 cycle fault current, loss of current within 60 second of fault current, with 24 ms plus/minus 20 percent delay trip - backfeed restraint. (Trip/Current Option N) 100 Amp di/dt adaptive trip, Note 3 Amp minimum load required. (Reset Time-Delay Option C) 4 hour automatic with current reset override, 60 seconds after restoration of power. (Factory Code 3). (Indicator Option T) Manual Reset Only, most commonly used with Flag model since batteries are not used for indication, requires tool AT2186-10. (Transmitter Phase Encoder Option N) No Transmitter. (Factory Code A).)
|
ABB
|
|
7TAA207400R0068
|
FAULT INDICATOR (Series 1548 Overhead Faulted Circuit Indicators. (Model F) Standard Offering, reclose dead time of 150 msec. (loss of current greater than 150 msec.), 3 Amp minimum load current required for reset. (Factory Code H). (Trip/Inrush Logic Option B) Adaptive Trip requires 60 second continuous minimum load current, arming time less than 1/4 cycle fault current, loss of current within 60 second of fault current, with 24 ms plus/minus 20 percent delay trip - backfeed restraint. (Trip/Current Option N) 100 Amp di/dt adaptive trip, Note 3 Amp minimum load required. (Reset Time-Delay Option C) 4 hour automatic with current reset override, 60 seconds after restoration of power. (Factory Code 3). (Indicator Option R) Radio with single LED for applications up to 69kV. (Transmitter Phase Encoder Option C) Phase C. (Factory Code A).)
|
ABB
|
|
7TAA207400R0067
|
FAULT INDICATOR (Series 1548 Overhead Faulted Circuit Indicators. (Model F) Standard Offering, reclose dead time of 150 msec. (loss of current greater than 150 msec.), 3 Amp minimum load current required for reset. (Factory Code H). (Trip/Inrush Logic Option B) Adaptive Trip requires 60 second continuous minimum load current, arming time less than 1/4 cycle fault current, loss of current within 60 second of fault current, with 24 ms plus/minus 20 percent delay trip - backfeed restraint. (Trip/Current Option N) 100 Amp di/dt adaptive trip, Note 3 Amp minimum load required. (Reset Time-Delay Option C) 4 hour automatic with current reset override, 60 seconds after restoration of power. (Factory Code 3). (Indicator Option R) Radio with single LED for applications up to 69kV. (Transmitter Phase Encoder Option B) Phase B. (Factory Code A).)
|
ABB
|
|
7TAA207400R0066
|
FAULT INDICATORS (Series 1548 Overhead Faulted Circuit Indicators. (Model F) Standard Offering, reclose dead time of 150 msec. (loss of current greater than 150 msec.), 3 Amp minimum load current required for reset. (Factory Code H). (Trip/Inrush Logic Option B) Adaptive Trip requires 60 second continuous minimum load current, arming time less than 1/4 cycle fault current, loss of current within 60 second of fault current, with 24 ms plus/minus 20 percent delay trip - backfeed restraint. (Trip/Current Option N) 100 Amp di/dt adaptive trip, Note 3 Amp minimum load required. (Reset Time-Delay Option C) 4 hour automatic with current reset override, 60 seconds after restoration of power. (Factory Code 3). (Indicator Option R) Radio with single LED for applications up to 69kV. (Transmitter Phase Encoder Option A) Phase A. (Factory Code A).)
|
ABB
|
|
7TAA207400R0065
|
FAULT INDICATOR (Series 1548 Overhead Faulted Circuit Indicator Main Feeder (3 Amp minimum load, 100A increase di/dt adaptive trip, 24-msec. delay for backfeed restraint))
|
ABB
|
|
7TAA207400R0064
|
FAULT INDICATOR (Series 1548 Overhead Faulted Circuit Indicators. (Model F) Standard Offering, reclose dead time of 150 msec. (loss of current greater than 150 msec.), 3 Amp minimum load current required for reset. (Factory Code H). (Trip/Inrush Logic Option B) Adaptive Trip requires 60 second continuous minimum load current, arming time less than 1/4 cycle fault current, loss of current within 60 second of fault current, with 24 ms plus/minus 20 percent delay trip - backfeed restraint. (Trip/Current Option D) 300 Amp di/dt adaptive trip, Note 3 Amp minimum load required. (Reset Time-Delay Option Z) 60 seconds after restoration of power, otherwisw no automatic reset. (Factory Code 3). (Indicator Option T) Strobe Light for applications up to 44kV. (Transmitter Phase Encoder Option N) No Transmitter. (Factory Code A).)
|
ABB
|
|
7TAA207400R0063
|
FAULT INDICATOR (Series 1548 Overhead Faulted Circuit Indicators. (Model F) Standard Offering, reclose dead time of 150 msec. (loss of current greater than 150 msec.), 3 Amp minimum load current required for reset. (Factory Code H). (Trip/Inrush Logic Option B) Adaptive Trip requires 60 second continuous minimum load current, arming time less than 1/4 cycle fault current, loss of current within 60 second of fault current, with 24 ms plus/minus 20 percent delay trip - backfeed restraint. (Trip/Current Option D) 300 Amp di/dt adaptive trip, Note 3 Amp minimum load required. (Reset Time-Delay Option C) 4 hour automatic with current reset override 60 seconds after restoration of power. (Factory Code 3). (Indicator Option R) Radio with single LED for applications up to 69kV. (Transmitter Phase Encoder Option C) Phase C. (Factory Code A).)
|
ABB
|
|
7TAA207400R0062
|
FAULT INDICATOR (Series 1548 Overhead Faulted Circuit Indicators. (Model F) Standard Offering, reclose dead time of 150 msec. (loss of current greater than 150 msec.), 3 Amp minimum load current required for reset. (Factory Code H). (Trip/Inrush Logic Option B) Adaptive Trip requires 60 second continuous minimum load current, arming time less than 1/4 cycle fault current, loss of current within 60 second of fault current, with 24 ms plus/minus 20 percent delay trip - backfeed restraint. (Trip/Current Option D) 300 Amp di/dt adaptive trip, Note 3 Amp minimum load required. (Reset Time-Delay Option C) 4 hour automatic with current reset override 60 seconds after restoration of power. (Factory Code 3). (Indicator Option R) Radio with single LED for applications up to 69kV. (Transmitter Phase Encoder Option B) Phase B. (Factory Code A).)
|
ABB
|
|
7TAA207400R0061
|
FAULT INDICATOR (Series 1548 Overhead Faulted Circuit Indicators. (Model F) Standard Offering, reclose dead time of 150 msec. (loss of current greater than 150 msec.), 3 Amp minimum load current required for reset. (Factory Code H). (Trip/Inrush Logic Option B) Adaptive Trip requires 60 second continuous minimum load current, arming time less than 1/4 cycle fault current, loss of current within 60 second of fault current, with 24 ms plus/minus 20 percent delay trip - backfeed restraint. (Trip/Current Option D) 300 Amp di/dt adaptive trip, Note 3 Amp minimum load required. (Reset Time-Delay Option C) 4 hour automatic with current reset override 60 seconds after restoration of power. (Factory Code 3). (Indicator Option R) Radio with single LED for applications up to 69kV. (Transmitter Phase Encoder Option A) Phase A. (Factory Code A).)
|
ABB
|
|
7TAA207400R0060
|
FCI,ADAPTIVE TRIP,300AMP DI/DT (Series 1548 Overhead Faulted Circuit Indicator Main Feeder (3 Amp minimum load, 300A di/dt adaptive trip, 24-msec. delay for backfeed restraint))
|
ABB
|
|
7TAA207400R0059
|
FCI, ADAPTIVE TRIP, 60 SECONDS (Series 1548 Overhead Faulted Circuit Indicators. (Model F) Standard Offering, reclose dead time of 150 msec. (loss of current greater than 150 msec.), 3 Amp minimum load current required for reset. (Factory Code H). (Trip/Inrush Logic Option A) Adaptive Trip requires 60 second continuous minimum load current, arming time less than 1/4 cycle fault current, loss of current within 60 second of fault current. (Trip/Current Option N) 100 Amp di/dt adaptive trip, Note 3 Amp minimum load required. (Reset Time-Delay Option Z) 60 seconds after restoration of power, otherwise no automatic reset. (Factory Code 3). (Indicator Option T) Strobe Light for applications up to 44kV. (Transmitter Phase Encoder Option N) No Transmitter. (Factory Code A).)
|
ABB
|
|
7TAA207400R0058
|
FCI, ADAPTIVE TRIP, 60 SECONDS (Series 1548 Overhead Faulted Circuit Indicators. (Model F) Standard Offering, reclose dead time of 150 msec. (loss of current greater than 150 msec.), 3 Amp minimum load current required for reset. (Factory Code H). (Trip/Inrush Logic Option A) Adaptive Trip requires 60 second continuous minimum load current, arming time less than 1/4 cycle fault current, loss of current within 60 second of fault current. (Trip/Current Option N) 100 Amp di/dt adaptive trip, Note 3 Amp minimum load required. (Reset Time-Delay Option Z) 60 seconds after restoration of power, otherwise no automatic reset. (Factory Code 3). (Indicator Option L) Single ultra bright LED, standard for applications up to 69kV. (Transmitter Phase Encoder Option N) No Transmitter. (Factory Code A).)
|
ABB
|
|
7TAA207400R0057
|
FCI, OVERHEAD, ADAPTIVE TRIP, (Series 1548 Overhead Faulted Circuit Indicator Branch Feeder (3 Amp minimum load, 100A increase within 50 msec. di/dt adaptive trip))
|
ABB
|
|
7TAA207400R0056
|
FCI, OVERHEAD, ADAPTIVE TRIP, (Series 1548 Overhead Faulted Circuit Indicators. (Model F) Standard Offering, reclose dead time of 150 msec. (loss of current greater than 150 msec.), 3 Amp minimum load current required for reset. (Factory Code H). (Trip/Inrush Logic Option A) Adaptive Trip requires 60 second continuous minimum load current, arming time less than 1/4 cycle fault current, loss of current within 60 second of fault current. (Trip/Current Option N) 100 Amp di/dt adaptive trip, Note 3 Amp minimum load required. (Reset Time-Delay Option T) Strobe Light for applications up to 44kV maximum. (Factory Code 3). (Indicator Option L) Single ultra bright LED, standard for applications up to 69kV. (Transmitter Phase Encoder Option N) No Transmitter. (Factory Code A).)
|
ABB
|
|
7TAA207400R0055
|
FAULT INDICATOR (Series 1548 Overhead Faulted Circuit Indicators. (Model F) Standard Offering, reclose dead time of 150 msec. (loss of current greater than 150 msec.), 3 Amp minimum load current required for reset. (Trip/Inrush Logic Option A) Adaptive Trip requires 60 second continuous minimum load current, arming time less than 1/4 cycle fault current, loss of current within 60 second of fault current. (Trip/Current Option N) 100 Amp di/dt adaptive trip, Note 3 Amp minimum load required. (Reset Time-Delay Option T) Strobe Light for applications up to 44kV maximum. (Transmitter Phase Encoder Option N) No Transmitter.)
|
ABB
|
|
7TAA207400R0054
|
FAULT INDICATOR (Series 1548 Overhead Faulted Circuit Indicators. (Model F) Standard Offering, reclose dead time of 150 msec. (loss of current greater than 150 msec.), 3 Amp minimum load current required for reset. (Factory Code H). (Trip/Inrush Logic Option A) Adaptive Trip requires 60 second continuous minimum load current, arming time less than 1/4 cycle fault current, loss of current within 60 second of fault current. (Trip/Current Option N) 100 Amp di/dt adaptive trip, Note 3 Amp minimum load required. (Reset Time-Delay Option T) Strobe Light for applications up to 44kV maximum. (Factory Code 3). (Indicator Option F) Flag for applications up to 44kV maximum. (Transmitter Phase Encoder Option N) No Transmitter. (Factory Code A).)
|
ABB
|
|
7TAA207400R0053
|
FAULT INDICATOR (Series 1548 Overhead Faulted Circuit Indicators. (Model F) Standard Offering, reclose dead time of 150 msec. (loss of current greater than 150 msec.), 3 Amp minimum load current required for reset. (Factory Code H). (Trip/Inrush Logic Option A) Adaptive Trip requires 60 second continuous minimum load current, arming time less than 1/4 cycle fault current, loss of current within 60 second of fault current. (Trip/Current Option N) 100 Amp di/dt adaptive trip, Note 3 Amp minimum load required. (Reset Time-Delay Option P) 24 hour automatic. (Factory Code 3). (Indicator Option L) Single Ultra bright LED, standard for applications up to 69kV maximum. (Transmitter Phase Encoder Option N) No Transmitter. (Factory Code A).)
|
ABB
|
|
7TAA207400R0052
|
FCI, OVERHEAD, STROBE, (Series 1548 Overhead Faulted Circuit Indicators. (Model F) Standard Offering, reclose dead time of 150 msec. (loss of current greater than 150 msec.), 3 Amp minimum load current required for reset. (Factory Code H). (Trip/Inrush Logic Option A) Adaptive Trip requires 60 second continuous minimum load current, arming time less than 1/4 cycle fault current, loss of current within 60 second of fault current. (Trip/Current Option N) 100 Amp di/dt adaptive trip, Note 3 Amp minimum load required. (Reset Time-Delay Option N) 4 hour automatic. (Factory Code 3). (Indicator Option T) Strobe Light, for applications up to 44kV maximum. (Transmitter Phase Encoder Option N) No Transmitter. (Factory Code A).)
|
ABB
|
|
7TAA207400R0051
|
RFCI PHASE C, ADAPTIVE TRIP, (Series 1548 Overhead Faulted Circuit Indicators. (Model F) Standard Offering, reclose dead time of 150 msec. (loss of current greater than 150 msec.), 3 Amp minimum load current required for reset. (Factory Code H). (Trip/Inrush Logic Option A) Adaptive Trip requires 60 second continuous minimum load current, arming time less than 1/4 cycle fault current, loss of current within 60 second of fault current. (Trip/Current Option N) 100 Amp di/dt adaptive trip, Note 3 Amp minimum load required. (Reset Time-Delay Option N) 4 hour automatic. (Factory Code 3). (Indicator Option R) Radio with single LED, for applications up to 69kV maximum. (Transmitter Phase Encoder Option C) Phase C. (Factory Code A).)
|
ABB
|
|
7TAA207400R0050
|
EFCI PHASE B, ADAPTIVE TRIP, (Series 1548 Overhead Faulted Circuit Indicators. (Model F) Standard Offering, reclose dead time of 150 msec. (loss of current greater than 150 msec.), 3 Amp minimum load current required for reset. (Factory Code H). (Trip/Inrush Logic Option A) Adaptive Trip requires 60 second continuous minimum load current, arming time less than 1/4 cycle fault current, loss of current within 60 second of fault current. (Trip/Current Option N) 100 Amp di/dt adaptive trip, Note 3 Amp minimum load required. (Reset Time-Delay Option N) 4 hour automatic. (Factory Code 3). (Indicator Option R) Radio with single LED, for applications up to 69kV maximum. (Transmitter Phase Encoder Option B) Phase B. (Factory Code A).)
|
ABB
|
|
7TAA207400R0049
|
RFCI PHASE A, ADAPTIVE TRIP, (Series 1548 Overhead Faulted Circuit Indicators. (Model F) Standard Offering, reclose dead time of 150 msec. (loss of current greater than 150 msec.), 3 Amp minimum load current required for reset. (Factory Code H). (Trip/Inrush Logic Option A) Adaptive Trip requires 60 second continuous minimum load current, arming time less than 1/4 cycle fault current, loss of current within 60 second of fault current. (Trip/Current Option N) 100 Amp di/dt adaptive trip, Note 3 Amp minimum load required. (Reset Time-Delay Option N) 4 hour automatic. (Factory Code 3). (Indicator Option R) Radio with single LED, for applications up to 69kV maximum. (Transmitter Phase Encoder Option A) Phase A. (Factory Code A).)
|
ABB
|
|
7TAA207400R0048
|
FCI, ADAPTIVE TRIP, 4HR TIME (Series 1548 Overhead Faulted Circuit Indicator Branch Feeder (3 Amp minimum load, 100A increase within 50 msec. di/dt adaptive trip))
|
ABB
|
|
7TAA207400R0047
|
FCI, OVERHEAD, STROBE, (Series 1548 Overhead Faulted Circuit Indicator Branch Feeder (3 Amp minimum load, 100A increase within 50 msec. di/dt adaptive trip). Strobe Light)
|
ABB
|
|
7TAA207400R0046
|
FAULT INDICATOR (Series 1548 Overhead Faulted Circuit Indicator Branch Feeder (3 Amp minimum load, 100A increase within 50 msec. di/dt adaptive trip). Radio with single LED for applications up to 69kV maximum, Tap Transmitter Phase Encoder)
|
ABB
|
|
7TAA207400R0045
|
RFCI PHASE C, ADAPTIVE TRIP, (Series 1548 Overhead Faulted Circuit Indicator Branch Feeder (3 Amp minimum load, 100A increase within 50 msec. di/dt adaptive trip). Radio with single LED for applications up to 69kV maximum)
|
ABB
|
|
7TAA207400R0044
|
RFCI PHASE B, ADAPTIVE TRIP, (Series 1548 Overhead Faulted Circuit Indicator Branch Feeder (3 Amp minimum load, 100A increase within 50 msec. di/dt adaptive trip))
|
ABB
|
Òîâàðû
5311 - 5340 èç 23691
Íà÷àëî
|
Ïðåä.
|
176
177
178
179
180
|
Ñëåä. |
Êîíåö
|
