7TAA2
| Àðòèêóë |
Íàèìåíîâàíèå |
Ïðîèçâîäèòåëü |
|
7TAA207420R0014
|
FAULT INDICATOR (Series 1514 Underground Faulted Circuit Indicator - Single Phase (one sensor, one indicator), Current Reset Faulted Circuit Indicator. , Flag Display, H Mounting Option - Hotstick mounting (attached indicator/sensor) (B and D sensors only, one phase only). Trip Settings -200 Amps, Inrush Restraint/Reset Delay Options - Flag Display, Manual Reset Override - Option Z - Inrush restraint, 60 second reset time delay after restoration of power. Minimum Reset Current Level is 3. Lead Length between Sensor and Display - Option N - None - Attached indicator sensor units, G or T sensor termination. Sensor Termination - Option T - Sensor and indicator attached to Hotstick clamp. Maximum Cable Diameter - Option B - 1-5/8 inches.)
|
ABB
|
|
7TAA207420R0013
|
FCI-200A,24 HR DELAY (Series 1514 Underground Faulted Circuit Indicator - Single Phase (one sensor, one indicator), Current Reset Faulted Circuit Indicator. , Flag Display, H Mounting Option - Hotstick mounting (attached indicator/sensor) (B and D sensors only, one phase only). Trip Settings -200 Amps, Inrush Restraint/Reset Delay Options - Flag Display, Manual Reset Override - Option P - Inrush restraint, 24 hour reset time delay after restoration of power. Minimum Reset Current Level is 3. Lead Length between Sensor and Display - Option N - None - Attached indicator sensor units, G or T sensor termination. Sensor Termination - Option T - Sensor and indicator attached to Hotstick clamp. Maximum Cable Diameter - Option D - 2-3/16 inches.)
|
ABB
|
|
7TAA207420R0012
|
FAULT INDICATOR (Series 1514 Current Reset Faulted Circuit Indicator with flag display and Manual Reset Override. Hotstick Mounting with attached indicator/sensor. 200A Fixed Trip setting. Standard Trip Curve, 10 to 30 sec. delay after restoration of power.)
|
ABB
|
|
7TAA207420R0011
|
FAULT INDICATOR,100A TRIP, (Series 1514 Underground Faulted Circuit Indicator - Single Phase (one sensor, one indicator), Current Reset Faulted Circuit Indicator. , Flag Display, H Mounting Option - Hotstick mounting (attached indicator/sensor) (B and D sensors only, one phase only). Trip Settings -100 Amps, Inrush Restraint/Reset Delay Options - Flag Display, Manual Reset Override - Option Z - Inrush restraint, 60 second reset time delay after restoration of power. Minimum Reset Current Level is 3. Lead Length between Sensor and Display - Option N - None - Attached indicator sensor units, G or T sensor termination. Sensor Termination - Option T - Sensor and indicator attached to Hotstick clamp. Maximum Cable Diameter - Option B - 1-5/8 inches.)
|
ABB
|
|
7TAA207420R0010
|
FCI,FLAG DISPLAY,HOTSTICK MT., (Series 1514 Underground Faulted Circuit Indicator - Single Phase (one sensor, one indicator), Current Reset Faulted Circuit Indicator. , Flag Display, H Mounting Option - Hotstick mounting (attached indicator/sensor) (B and D sensors only, one phase only). Trip Settings -100 Amps, Inrush Restraint/Reset Delay Options - Flag Display, Manual Reset Override - Option N - Inrush restraint, No automatic reset, manual reset only. Minimum Reset Current Level is 0. Lead Length between Sensor and Display - Option N - None - Attached indicator sensor units, G or T sensor termination. Sensor Termination - Option T - Sensor and indicator attached to Hotstick clamp. Maximum Cable Diameter - Option B - 1-5/8 inches.)
|
ABB
|
|
7TAA207420R0009
|
FAULT INDICATOR (Series 1514 Underground Faulted Circuit Indicator - Single Phase (one sensor, one indicator), Current Reset Faulted Circuit Indicator. , Flag Display, H Mounting Option - Hotstick mounting (attached indicator/sensor) (B and D sensors only, one phase only). Trip Settings -100 Amps, Inrush Restraint/Reset Delay Options - Flag Display, Manual Reset Override - Option A - Standard Trip Curve, 10-30 second delay after restoration of power. Minimum Reset Current Level is 3. Lead Length between Sensor and Display - Option N - None - Attached indicator sensor units, G or T sensor termination. Sensor Termination - Option T - Sensor and indicator attached to Hotstick clamp. Maximum Cable Diameter - Option B - 1-5/8 inches.)
|
ABB
|
|
7TAA207420R0008
|
FCI, FLAG, BRACKET,400 A TRIP, (Series 1514 Underground Faulted Circuit Indicator - Single Phase (one sensor, one indicator), Current Reset Faulted Circuit Indicator. , Flag Display, B Mounting Option - Bracket/surface mounting (remote from sensor). Trip Settings -400 Amps, Inrush Restraint/Reset Delay Options - Flag Display, Manual Reset Override - Option W - Inrush restraint, 4 hour reset time delay after restoration of power. Minimum Reset Current Level is 3. Lead Length between Sensor and Display - Option 10 - 10 foot standard. Sensor Termination - Option S - Terminates with remote lead connected to sensor. Maximum Cable Diameter - Option M - 1-5/8 inches and has snap-on U lamination for circuit isolation.)
|
ABB
|
|
7TAA207420R0007
|
FAULT INDICATOR (Series 1514 Current Reset Faulted Circuit Indicator with Flag display and Manual Set Override. Bracket/surface mounting. 400A Fixed Trip setting. Standard Trip Curve, 10 to 30 sec. delay after restoration of power.)
|
ABB
|
|
7TAA207420R0006
|
FAULT INDICATOR,300 AMP,0HR (Series 1514 Current Reset Faulted Circuit Indicator with Flag display and Manual Set Override. Bracket/surface mounting. 300A Fixed Trip setting. Inrush restraint, 60 sec. reset time delay after restoration of power.)
|
ABB
|
|
7TAA207420R0005
|
FAULT INDICATOR (Series 1514 Current Reset Faulted Circuit Indicator with Flag display and Manual Set Override. Bracket/surface mounting. 300A Fixed Trip setting. Standard Trip Curve, 10 to 30 sec. delay after restoration of power.)
|
ABB
|
|
7TAA207420R0004
|
FAULT INDICATOR (Series 1514 Underground Faulted Circuit Indicator - Single Phase (one sensor, one indicator), Current Reset Faulted Circuit Indicator. , Flag Display, B Mounting Option - Bracket/surface mounting (remote from sensor). Customer Specific Modication 38467.)
|
ABB
|
|
7TAA207420R0003
|
FCI,FLAG DISPLAY,200A TRIP, (Series 1514 Current Reset Faulted Circuit Indicator with Flag display and Manual Set Override. Bracket/surface mounting. 200A Fixed Trip setting. Standard Trip Curve, 10 to 30 sec. delay after restoration of power.)
|
ABB
|
|
7TAA207420R0002
|
FCI,LED,1200A TRIP,HOTSTICK (Series 1514 Underground Faulted Circuit Indicator - Single Phase (one sensor, one indicator), Current Reset Faulted Circuit Indicator. , LED Display (non-replaceable battery). H Mounting Option - Hotstick mounting (attached indicator/sensor) (B and D sensors only, one phase only). Trip Settings -1200 Amps, Inrush Restraint/Reset Delay Options - LED Display, Inrush Restraint - Option M - 4 hour reset time delay after fault occurrence with manual reset override. Minimum Reset Current Level is 3. Lead Length between Sensor and Display - Option N - None - Attached indicator sensor units, G or T sensor termination. Maximum Cable Diameter - Option B - 1-5/8 inches. Trasmitter Phase Encoding - Option B - Phase B)
|
ABB
|
|
7TAA207420R0001
|
DIRECTIONAL FCI, 1200A TRIP, (Smartnet Directional Network FCI, Flag Display and single N/O latching SCADA output contact, Tie-wrap mounting (attached indicator/sensor), 1200 Amp Trip, Customer Specific Modication 45102.)
|
ABB
|
|
7TAA207420R0000
|
FAULT INDICATOR, 800 AMP TRIP, (Smartnet Directional Network FCI, Flag Display and single N/O latching SCADA output contact, Hotstick Mounting (attached indicator/sensor), 800 Amp Trip, Customer Specific Modication 39778.)
|
ABB
|
|
7TAA207410R0106
|
FISHER PIERCE FCI SERIES 1547B (15 to 35 kv, Fisher Pierce FCI Series 1547 Underground Faulted Circuit Indicator - LED type. Indicator Mounting Option - Bracket/Surface Mount, Reset Delay - 4 Hour with Manual Reset, Sensor Mounting - Remote Tie-Wrap, Reset Current - 1.0 Amp (1-5/8 inch Sensor with U-Lamination), No SCADA Output, 10 Foot Lead Length between Sensor and Display, Standard Close Proximity.)
|
ABB
|
|
7TAA207410R0105
|
FAULT INDICATOR (Underground Faulted Circuit Indicator, Standard Flag Type, Tie-Wrap Mount, 60 second time reset time delay after power restoration, Integral Tie-Wrap sensor mounting, Reset Current - 1.5 Amp with U-Lamination, No SCADA output, No Lead Length between Sensor and Display, Close Proximity - Raised zero reference to 7A.)
|
ABB
|
|
7TAA207410R0104
|
FAULT INDICATOR (Underground Faulted Circuit Indicator, Standard Flag Type,Bracket Surface Mount, 60 second time reset time delay after power restoration, Remote Tie-Wrap sensor mounting, Reset Current - 1.5 Amp with U-Lamination, No SCADA output, 15 foot Lead Length between Sensor and Display, Close Proximity - Raised zero reference to 7A.)
|
ABB
|
|
7TAA207410R0103
|
FAULT INDICATOR (Series 1547 Adaptive Trip Underground Faulted Circuit Indicator, Standard FCI Flag type. Indicator Mounting Option M - Tie-Wrap Mount. Reset Delay Option Z - 60 second reset time delay after power restoration. Sensor Mounting Option G - Integral Tie-Wrap. Reset Current Option M - 1.0 Amp (1-5/8 inch sensor with U-Lamination). SCADA Output option A - N.O. (10 foot lead). No Lead between Sensor and Display - attached indicatior sensor units. Close Proximity - Raised zero reference to 7A.)
|
ABB
|
|
7TAA207410R0102
|
4 HR W/CUR RFCI LED,2-3/16 TAP (Series 1547 Adaptive Trip Underground Faulted Circuit Indicator, Integral Radio Transmitter LED Type. Indicator Mounting Option H - Hotstick Mount with Clamp. Reset Delay Option J - 4 hour reset with current override. Sensor Mounting option T - Integral Hotstick. Reset Current option D - 3.0 Amp (2-3/16 inch sensor). SCADA Output option N - No SCADA. Lead Length option N - None - attached indicator sensor units. Close Proximity option N - Standard. Transmitter Phase Encoding option T - Tap.)
|
ABB
|
|
7TAA207410R0101
|
FCI,REMOTE 10FT OPTIC, 8-HR RESET (Series 1547 Adaptive Trip Underground Faulted Circuit Indicator, Standard FCI 10 foot Remote Fiber Optic cable display. Indicator Mounting Option H - Hotstick Mount with Clamp. Reset Delay Option E - 4 hour reset with current and manual reset override. Sensor Mounting option T - Integral Hotstick. Reset Current option D - 3.0 Amp (2-3/16 inch sensor). SCADA Output option N - No SCADA. Lead Length option N - None - attached indicator sensor units. Close Proximity option N - Standard. Customer Specific Modifications for 8 hour reset and 10 foot optic cable)
|
ABB
|
|
7TAA207410R0100
|
FCI,REMOTE 10FT OPTIC, 8-HR RESET (Series 1547 Adaptive Trip Underground Faulted Circuit Indicator, Standard FCI 10 foot Remote Fiber Optic cable display. Indicator Mounting Option H - Hotstick Mount with Clamp. Reset Delay Option E - 4 hour reset with current and manual reset override. Sensor Mounting option T - Integral Hotstick. Reset Current option B - 2.0 Amp (1-5/8 inch sensor). SCADA Output option N - No SCADA. Lead Length option N - None - attached indicator sensor units. Close Proximity option N - Standard. Customer Specific Modifications for 8 hour reset and 10 foot optic cable)
|
ABB
|
|
7TAA207410R0099
|
ADAPTIVE TRIP FCI,RADIO,PH-C (Series 1547 Adaptive Trip Underground Faulted Circuit Indicator, Integral Radio Transmitter LED Type. Indicator Mounting Option M - Tie-Wrap Mount. Reset Delay Option J - 4 hour rest with current override. Sensor Mounting option G - Integral Tie-Wrap. Reset Current option L - 1.5 Amp (2-3/16 inch sensor with U-Lamination). SCADA Output option N - No SCADA. Lead Length option N - None - attached indicator sensor units. Close Proximity option N - Standard. Transmitter Phase Encoding option C - Phase C.)
|
ABB
|
|
7TAA207410R0098
|
ADAPTIVE TRIP FCI,RADIO,PH-B (Series 1547 Adaptive Trip Underground Faulted Circuit Indicator, Integral Radio Transmitter LED Type. Indicator Mounting Option M - Tie-Wrap Mount. Reset Delay Option J - 4 hour rest with current override. Sensor Mounting option G - Integral Tie-Wrap. Reset Current option L - 1.5 Amp (2-3/16 inch sensor with U-Lamination). SCADA Output option N - No SCADA. Lead Length option N - None - attached indicator sensor units. Close Proximity option N - Standard. Transmitter Phase Encoding option B - Phase B.)
|
ABB
|
|
7TAA207410R0097
|
ADAPTIVE TRIP FCI,RADIO,PH-A (Series 1547 Adaptive Trip Underground Faulted Circuit Indicator, Integral Radio Transmitter LED Type. Indicator Mounting Option M - Tie-Wrap Mount. Reset Delay Option J - 4 hour rest with current override. Sensor Mounting option G - Integral Tie-Wrap. Reset Current option L - 1.5 Amp (2-3/16 inch sensor with U-Lamination). SCADA Output option N - No SCADA. Lead Length option N - None - attached indicator sensor units. Close Proximity option N - Standard. Transmitter Phase Encoding option A - Phase A.)
|
ABB
|
|
7TAA207410R0096
|
ADAPTIVE TRIP FCI, RADIO AND LED (Series 1547 Adaptive Trip Faulted Circuit Indicator. Standard Faulted Circuit Indicator with Integral Radio Transmitter LED type. Manual Trip, Manual Reset. Tie-Wrap Mount. 4-hr reset with current override.)
|
ABB
|
|
7TAA207410R0095
|
ADAPTIVE TRIP FCI, RADIO AND LED (Series 1547 Adaptive Trip Faulted Circuit Indicator. Standard Faulted Circuit Indicator with Integral Radio Transmitter LED type. Manual Trip, Manual Reset. Tie-Wrap Mount. 4-hr reset with current override.)
|
ABB
|
|
7TAA207410R0094
|
ADAPTIVE TRIP FCI, RADIO AND LED (Series 1547 Adaptive Trip Faulted Circuit Indicator. Standard Faulted Circuit Indicator with Integral Radio Transmitter LED type. Manual Trip, Manual Reset. Tie-Wrap Mount. 4-hr reset with current override.)
|
ABB
|
|
7TAA207410R0093
|
FCI, REMOTE 10FT OPTIC, HOT STICK (Series 1547 Adaptive Trip Underground Faulted Circuit Indicator, Standard FCI 10 foot Remote Fiber Optic cable display. Indicator Mounting Option H - Hotstick Mount with Clamp. Reset Delay Option T - 4 hour reset time delay with current override, manual trip and manual reset override. Sensor Mounting option T - Integral Hotstick. Reset Current option L - 1.5 Amp (1-5/8 inch sensor with U-Lamination). SCADA Output option N - No SCADA. Lead Length option N - None - attached indicator sensor units. Close Proximity option N - Standard)
|
ABB
|
|
7TAA207410R0092
|
FAULTED CIRCUIT INDICATOR (Series 1547 Adaptive Trip Underground Faulted Circuit Indicator, Standard FCI 10 foot Remote Fiber Optic cable display. Indicator Mounting Option H - Hotstick Mount with Clamp. Reset Delay Option N - 4 hour reset with manual trip and manual reset. Sensor Mounting option T - Integral Hotstick. Reset Current option L - 1.5 Amp (1-5/8 inch sensor with U-Lamination). SCADA Output option N - No SCADA. Lead Length option N - None - attached indicator sensor units. Close Proximity option N - Standard)
|
ABB
|
Òîâàðû
5071 - 5100 èç 23691
Íà÷àëî
|
Ïðåä.
|
168
169
170
171
172
|
Ñëåä. |
Êîíåö
|
