7TAA2
| Àðòèêóë |
Íàèìåíîâàíèå |
Ïðîèçâîäèòåëü |
|
7TAA207420R0044
|
FAULT INDICATOR, 200 AMP TRIP, (Series 1514 Current Reset Faulted Circuit Indicator with Flag Display and Manual Reset Override. Window/Flush mounting. 200A Fixed Trip Setting. Standard Trip Curve, 10 to 30 sec. delay after restoration of power.)
|
ABB
|
|
7TAA207420R0043
|
FAULT INDICATOR (Series 1514 Underground Faulted Circuit Indicator - Single Phase (one sensor, one indicator), Current Reset Faulted Circuit Indicator. , Flag Display, P Mounting Option - Window/flush mounting (remote from sensor). Trip Settings -200 Amps, Inrush Restraint/Reset Delay Options - Flag Display, Manual Reset Override - Option A - Standard Trip Curve, 10-30 second delay after restoration of power. Minimum Reset Current Level is 1.2. Lead Length between Sensor and Display - Option 10 - 10 foot standard. Sensor Termination - Option S - Terminates with remote lead connected to sensor. Maximum Cable Diameter - Option M - 1-5/8 inches and has snap-on U lamination for circuit isolation.)
|
ABB
|
|
7TAA207420R0042
|
FAULT INDICATOR (Series 1514 Underground Faulted Circuit Indicator - Single Phase (one sensor, one indicator), Current Reset Faulted Circuit Indicator. , Flag Display, P Mounting Option - Window/flush mounting (remote from sensor). Trip Settings -100 Amps, Inrush Restraint/Reset Delay Options - Flag Display, Manual Reset Override - Option A - Standard Trip Curve, 10-30 second delay after restoration of power. Minimum Reset Current Level is 5. Lead Length between Sensor and Display - Option 10 - 10 foot standard. Sensor Termination - Option S - Terminates with remote lead connected to sensor. Maximum Cable Diameter - Option B - 1-5/8 inches.)
|
ABB
|
|
7TAA207420R0041
|
FAULTED CIRCUIT INDICATOR,FLAG (Series 1514 Current Reset Faulted Circuit Indicator with flag display and Manual Reset Override. Tie-wrap mounting with attached indicator/sensor. 800A Fixed Trip setting. Inrush restraint, 60 sec. reset time delay after restoration of power.)
|
ABB
|
|
7TAA207420R0040
|
FAULT INDICATOR,800 AMP TRIP, (Series 1514 Underground Faulted Circuit Indicator - Single Phase (one sensor, one indicator), Current Reset Faulted Circuit Indicator. , Flag Display, M Mounting Option - Tie-wrap mounting (attached indicator/sensors), Trip Settings -800 Amps, Inrush Restraint/Reset Delay Options - Flag Display, Manual Reset Override - Option Z - Inrush restraint, 60 second reset time delay after restoration of power. Minimum Reset Current Level is 1.2. Lead Length between Sensor and Display - Option N - None - Attached indicator sensor units, G or T sensor termination. Sensor Termination - Option G - Sensor attached to indicator, Tie-Wrap Mount. Maximum Cable Diameter - Option M - 1-5/8 inches and has snap-on U lamination for circuit isolation.)
|
ABB
|
|
7TAA207420R0039
|
FAULT INDICATOR,800 AMP TRIP, (Series 1514 Underground Faulted Circuit Indicator - Single Phase (one sensor, one indicator), Current Reset Faulted Circuit Indicator. , Flag Display, M Mounting Option - Tie-wrap mounting (attached indicator/sensors), Trip Settings -800 Amps, Inrush Restraint/Reset Delay Options - Flag Display, Manual Reset Override - Option A - Standard Trip Curve, 10-30 second delay after restoration of power. Minimum Reset Current Level is 3. Lead Length between Sensor and Display - Option N - None - Attached indicator sensor units, G or T sensor termination. Sensor Termination - Option G - Sensor attached to indicator, Tie-Wrap Mount. Maximum Cable Diameter - Option M - 1-5/8 inches and has snap-on U lamination for circuit isolation.)
|
ABB
|
|
7TAA207420R0038
|
FAULT INDICATOR (Series 1514 Underground Faulted Circuit Indicator - Single Phase (one sensor, one indicator), Current Reset Faulted Circuit Indicator. , Flag Display, M Mounting Option - Tie-wrap mounting (attached indicator/sensors), Trip Settings -600 Amps, Inrush Restraint/Reset Delay Options - Flag Display, Manual Reset Override - Option W - Inrush restraint, 4 hour reset time delay after restoration of power. Minimum Reset Current Level is 1.5. Lead Length between Sensor and Display - Option N - None - Attached indicator sensor units, G or T sensor termination. Sensor Termination - Option G - Sensor attached to indicator, Tie-Wrap Mount. Maximum Cable Diameter - Option L - 2-3/16 inches and has snap-on U lamination for circuit isolation.)
|
ABB
|
|
7TAA207420R0037
|
FAULT INDICATOR (Series 1514 Underground Faulted Circuit Indicator - Single Phase (one sensor, one indicator), Current Reset Faulted Circuit Indicator. , Flag Display, M Mounting Option - Tie-wrap mounting (attached indicator/sensors), Trip Settings -600 Amps, Inrush Restraint/Reset Delay Options - Flag Display, Manual Reset Override - Option A - Standard Trip Curve, 10-30 second delay after restoration of power. Minimum Reset Current Level is 3. Lead Length between Sensor and Display - Option N - None - Attached indicator sensor units, G or T sensor termination. Sensor Termination - Option G - Sensor attached to indicator, Tie-Wrap Mount. Maximum Cable Diameter - Option K - 2-5/16 inches.)
|
ABB
|
|
7TAA207420R0036
|
FAULT INDICATOR,FLAG,400 AMP (Series 1514 Current Reset Faulted Circuit Indicator with flag display and Manual Reset Override. Tie-wrap mounting with attached indicator/sensor. 400A Fixed Trip setting. Inrush restraint, 4 hr reset time delay after restoration of power.)
|
ABB
|
|
7TAA207420R0035
|
FAULT INDICATOR (Series 1514 Current Reset Faulted Circuit Indicator with flag display and Manual Reset Override. Tie-wrap mounting with attached indicator/sensor. 400A Fixed Trip setting. Standard Trip Curve, 10 to 30 sec. delay after restoration of power.)
|
ABB
|
|
7TAA207420R0034
|
FAULT INDICATOR, 600AMP, INRUS (Series 1514 Underground Faulted Circuit Indicator - Single Phase (one sensor, one indicator), Current Reset Faulted Circuit Indicator. , Flag Display, M Mounting Option - Tie-wrap mounting (attached indicator/sensors). Customer Specific Modication 40627.)
|
ABB
|
|
7TAA207420R0033
|
FAULT INDICATOR (Series 1514 Current Reset Faulted Circuit Indicator with flag display and Manual Reset Override. Tie-wrap mounting with attached indicator/sensor. 300A Fixed Trip setting. Inrush restraint, 60 sec. reset time delay after restoration of power.)
|
ABB
|
|
7TAA207420R0032
|
FAULT INDICATOR (Series 1514 Underground Faulted Circuit Indicator - Single Phase (one sensor, one indicator), Current Reset Faulted Circuit Indicator. , Flag Display, M Mounting Option - Tie-wrap mounting (attached indicator/sensors). Customer Specific Modication 38830.)
|
ABB
|
|
7TAA207420R0031
|
FAULT INDICATOR (Series 1514 Underground Faulted Circuit Indicator - Single Phase (one sensor, one indicator), Current Reset Faulted Circuit Indicator. , Flag Display, M Mounting Option - Tie-wrap mounting (attached indicator/sensors). Trip Settings - 200 Amps, Inrush Restraint/Reset Delay Options - Flag Display, Manual Reset Override - Option A - Standard Trip Curve, 10-30 second delay after restoration of power. Minimum Reset Current Level is 1.2. Lead Length between Sensor and Display - Option N - None - Attached indicator sensor units, G or T sensor termination. Sensor Termination - Option G - Sensor attached to indicator, Tie-Wrap Mount. Maximum Cable Diameter - Option M - 1-5/8 inches and has snap-on U lamination for circuit isolation.)
|
ABB
|
|
7TAA207420R0030
|
FAULTED CIRCUIT INDICATOR,FLAG (Series 1514 Underground Faulted Circuit Indicator - Single Phase (one sensor, one indicator), Current Reset Faulted Circuit Indicator. , Flag Display, M Mounting Option - Tie-wrap mounting (attached indicator/sensors). Trip Settings - 50 Amps, Inrush Restraint/Reset Delay Options - Flag Display, Manual Reset Override - Option A - Standard Trip Curve, 10-30 second delay after restoration of power. Minimum Reset Current Level is 1.2. Lead Length between Sensor and Display - Option N - None - Attached indicator sensor units, G or T sensor termination. Sensor Termination - Option G - Sensor attached to indicator, Tie-Wrap Mount. Maximum Cable Diameter - Option M - 1-5/8 inches and has snap-on U lamination for circuit isolation.)
|
ABB
|
|
7TAA207420R0029
|
FAULT INDICATOR, HOTSTICK, (Series 1514 Underground Faulted Circuit Indicator - Single Phase (one sensor, one indicator), Current Reset Faulted Circuit Indicator. , Flag Display, H Mounting Option - Hotstick mounting (attached indicator/sensor) (B and D sensors only, one phase only). Trip Settings -800 Amps, Inrush Restraint/Reset Delay Options - Flag Display, Manual Reset Override - Option Z - Inrush restraint, 60 second reset time delay after restoration of power. Minimum Reset Current Level is 3. Lead Length between Sensor and Display - Option N - None - Attached indicator sensor units, G or T sensor termination. Sensor Termination - Option T - Sensor and indicator attached to Hotstick clamp. Maximum Cable Diameter - Option K - 2-5/16 inches.)
|
ABB
|
|
7TAA207420R0028
|
FCI,HOTSTICK,800A TRIP,INRUSH, (Series 1514 Current Reset Faulted Circuit Indicator with flag display and Manual Reset Override. Hotstick Mounting with attached indicator/sensor. 800A Fixed Trip setting. Inrush restraint, 24 hr. reset time delay after restoration of power. Lead Length between Sensor and Display - Option N - None - Attached indicator sensor units, G or T sensor termination. Sensor Termination - Option T - Sensor and indicator attached to Hotstick clamp. Maximum Cable Diameter - Option K - 2-5/16 inches.)
|
ABB
|
|
7TAA207420R0027
|
FAULT INDICATOR (Series 1514 Current Reset Faulted Circuit Indicator with flag display and Manual Reset Override. Hotstick Mounting with attached indicator/sensor. 800A Fixed Trip setting. Standard Trip Curve, 10 to 30 sec. delay after restoration of power.)
|
ABB
|
|
7TAA207420R0026
|
FAULT INDICATOR,600 AMPS, (Series 1514 Underground Faulted Circuit Indicator - Single Phase (one sensor, one indicator), Current Reset Faulted Circuit Indicator. , Flag Display, H Mounting Option - Hotstick mounting (attached indicator/sensor) (B and D sensors only, one phase only). Trip Settings -600 Amps, Inrush Restraint/Reset Delay Options - Flag Display, Manual Reset Override - Option Z - Inrush restraint, 60 second reset time delay after restoration of power. Minimum Reset Current Level is 3. Lead Length between Sensor and Display - Option N - None - Attached indicator sensor units, G or T sensor termination. Sensor Termination - Option T - Sensor and indicator attached to Hotstick clamp. Maximum Cable Diameter - Option B - 1-5/8 inches.)
|
ABB
|
|
7TAA207420R0025
|
FAULT INDICATOR,600 AMPS, (Series 1514 Underground Faulted Circuit Indicator - Single Phase (one sensor, one indicator), Current Reset Faulted Circuit Indicator. , Flag Display, H Mounting Option - Hotstick mounting (attached indicator/sensor) (B and D sensors only, one phase only). Trip Settings -600 Amps, Inrush Restraint/Reset Delay Options - Flag Display, Manual Reset Override - Option W - Inrush restraint, 4 hour reset time delay after restoration of power. Minimum Reset Current Level is 3. Lead Length between Sensor and Display - Option N - None - Attached indicator sensor units, G or T sensor termination. Sensor Termination - Option T - Sensor and indicator attached to Hotstick clamp. Maximum Cable Diameter - Option D - 2-3/16 inches.)
|
ABB
|
|
7TAA207420R0024
|
FAULT INDICATOR,600 AMPS, (Series 1514 Underground Faulted Circuit Indicator - Single Phase (one sensor, one indicator), Current Reset Faulted Circuit Indicator. , Flag Display, H Mounting Option - Hotstick mounting (attached indicator/sensor) (B and D sensors only, one phase only). Trip Settings -600 Amps, Inrush Restraint/Reset Delay Options - Flag Display, Manual Reset Override - Option W - Inrush restraint, 4 hour reset time delay after restoration of power. Minimum Reset Current Level is 3. Lead Length between Sensor and Display - Option N - None - Attached indicator sensor units, G or T sensor termination. Sensor Termination - Option T - Sensor and indicator attached to Hotstick clamp. Maximum Cable Diameter - Option B - 1-5/8 inches.)
|
ABB
|
|
7TAA207420R0023
|
FAULTED CIRCUIT INDICATOR,FLAG (Series 1514 Current Reset Faulted Circuit Indicator with flag display and Manual Reset Override. Hotstick Mounting with attached indicator/sensor. 600A Fixed Trip setting. Standard Trip Curve, 10 to 30 sec. delay after restoration of power.)
|
ABB
|
|
7TAA207420R0022
|
FAULT INDICATOR (Series 1514 Underground Faulted Circuit Indicator - Single Phase (one sensor, one indicator), Current Reset Faulted Circuit Indicator. , Flag Display, H Mounting Option - Hotstick mounting (attached indicator/sensor) (B and D sensors only, one phase only). Trip Settings -500 Amps, Inrush Restraint/Reset Delay Options - Flag Display, Manual Reset Override - Option P - Inrush restraint, 24 hour reset time delay after restoration of power. Minimum Reset Current Level is 3. Lead Length between Sensor and Display - Option N - None - Attached indicator sensor units, G or T sensor termination. Sensor Termination - Option T - Sensor and indicator attached to Hotstick clamp. Maximum Cable Diameter - Option D - 2-3/16 inches.)
|
ABB
|
|
7TAA207420R0021
|
FAULT INDICATOR,400 AMP, TRIP, (Series 1514 Underground Faulted Circuit Indicator - Single Phase (one sensor, one indicator), Current Reset Faulted Circuit Indicator. , Flag Display, H Mounting Option - Hotstick mounting (attached indicator/sensor) (B and D sensors only, one phase only). Trip Settings -400 Amps, Inrush Restraint/Reset Delay Options - Flag Display, Manual Reset Override - Option W - Inrush restraint, 4 hour reset time delay after restoration of power. Minimum Reset Current Level is 3. Lead Length between Sensor and Display - Option N - None - Attached indicator sensor units, G or T sensor termination. Sensor Termination - Option T - Sensor and indicator attached to Hotstick clamp. Maximum Cable Diameter - Option B - 1-5/8 inches.)
|
ABB
|
|
7TAA207420R0020
|
FAULT INDICATOR (Series 1514 Current Reset Faulted Circuit Indicator with flag display and Manual Reset Override. Hotstick Mounting with attached indicator/sensor. 400A Fixed Trip setting. Standard Trip Curve, 10 to 30 sec. delay after restoration of power.)
|
ABB
|
|
7TAA207420R0019
|
FAULT INDICATOR (Series 1514 Underground Faulted Circuit Indicator - Single Phase (one sensor, one indicator), Current Reset Faulted Circuit Indicator. , Flag Display, H Mounting Option - Hotstick mounting (attached indicator/sensor) (B and D sensors only, one phase only). Trip Settings -400 Amps, Inrush Restraint/Reset Delay Options - Flag Display, Manual Reset Override - Option A - Standard Trip Curve, 10-30 second delay after restoration of power. Minimum Reset Current Level is 1.5. Lead Length between Sensor and Display - Option N - None - Attached indicator sensor units, G or T sensor termination. Sensor Termination - Option T - Sensor and indicator attached to Hotstick clamp. Maximum Cable Diameter - Option L - 2-3/16 inches and has snap-on U lamination for circuit isolation. Maximum Cable Diameter - Option B - 1-5/8 inches.)
|
ABB
|
|
7TAA207420R0018
|
FAULT INDICATOR, 600AMP, INRUS (Series 1514 Underground Faulted Circuit Indicator - Single Phase (one sensor, one indicator), Current Reset Faulted Circuit Indicator. , Flag Display, H Mounting Option - Hotstick mounting (attached indicator/sensor) (B and D sensors only, one phase only). 600 Amps, Customer Specific Modication 40628.)
|
ABB
|
|
7TAA207420R0017
|
FAULT INDICATOR,300A TRIP, (Series 1514 Underground Faulted Circuit Indicator - Single Phase (one sensor, one indicator), Current Reset Faulted Circuit Indicator. , Flag Display, H Mounting Option - Hotstick mounting (attached indicator/sensor) (B and D sensors only, one phase only). Trip Settings -300 Amps, Inrush Restraint/Reset Delay Options - Flag Display, Manual Reset Override - Option W - Inrush restraint, 4 hour reset time delay after restoration of power. Minimum Reset Current Level is 3. Lead Length between Sensor and Display - Option N - None - Attached indicator sensor units, G or T sensor termination. Sensor Termination - Option T - Sensor and indicator attached to Hotstick clamp. Maximum Cable Diameter - Option B - 1-5/8 inches.)
|
ABB
|
|
7TAA207420R0016
|
FAULT INDICATOR (Series 1514 Current Reset Faulted Circuit Indicator with flag display and Manual Reset Override. Hotstick Mounting with attached indicator/sensor. 300A Fixed Trip setting. Standard Trip Curve, 10 to 30 sec. delay after restoration of power.)
|
ABB
|
|
7TAA207420R0015
|
FAULT INDICATOR,FLAG,HOTSTICK (Series 1514 Underground Faulted Circuit Indicator - Single Phase (one sensor, one indicator), Current Reset Faulted Circuit Indicator. , Flag Display, H Mounting Option - Hotstick mounting (attached indicator/sensor) (B and D sensors only, one phase only). Customer Specific Modication 38847.)
|
ABB
|
Òîâàðû
5041 - 5070 èç 23691
Íà÷àëî
|
Ïðåä.
|
167
168
169
170
171
|
Ñëåä. |
Êîíåö
|
