7TAA2
| Àðòèêóë |
Íàèìåíîâàíèå |
Ïðîèçâîäèòåëü |
|
7TAA266240R0386
|
BOLTED TERM 2 CABLE TO FLAT GALV BO (Bolted Aluminum Connector, Type A7MM1-90, Bolted Terminal, Two Cables to Flat at 90 Degrees, One-Cap Design. 2-Hole NEMA Flat. Cable Size AAC #4-250, Cable Size ACSR #4-4/0, Cable Diameter .232-.575 inch, 3 inch X 1/2 inch thick. Connectors supplied with clamping hardware in accordance with NEMA standard CC 1. All pads are finished on both sides. EH is for Galvanized Hardware.)
|
ABB
|
|
7TAA266240R0385
|
BOLTED ALUM TERM 2 CABLES TO FLAT (Bolted Aluminum Connector, Type A7MM1, Bolted Terminal, Two Cables to Flat, One-Cap Design. 2-Hole NEMA Flat. Cable Size AAC #4-250, Cable Size ACSR #4-4/0, Cable Diameter .232-.575 inch, 6-5/8 inch X 3 inch X 1/2 inch thick. Connectors supplied with clamping hardware in accordance with NEMA standard CC 1. All pads are finished on both sides.)
|
ABB
|
|
7TAA266240R0384
|
TERM.BOLT CONN W/8 IN PAD,9 HOLES (Aluminum Bolted Substation Terminal - 2 Cables to Pad - Straight - Side-formed Pad - Dual Taps, Side-by-Side, Single Cap - 230kV Maximum - 556.5-1500 AAC 477 (26/7,30/7), 500-1272, 1351.5 (45/7), 1361 ACSR to 8X8 inch, 9-hole Pad)
|
ABB
|
|
7TAA266240R0383
|
AL Terminal 2Cable 1500AAC-6NW Pad (Aluminum Bolted Substation Terminal (Straight - Side Formed Pad) - 2 Cables to Pad - 556-1500AAC 636-1272ACSR to 6 x 4 inch 6-hole Pad)
|
ABB
|
|
7TAA266240R0382
|
BOLTER TERMINAL 2 CABLES TO FLAT (Bolted Aluminum Connector, Type A7MM1, Bolted Terminal, Two Cables to Flat, One-Cap Design. Cable Size AAC 600-1500, Cable Size ACSR 636-1272, Cable Diameter .891-1.412 inch, 8-1/2 X 3-5/8 inch X 7/8 inch thick. Connectors supplied with clamping hardware in accordance with NEMA standard CC 1. All pads are finished on both sides. E5060M is for special Pad Configuration.)
|
ABB
|
|
7TAA266240R0381
|
BOLTED TERMINAL TWO CABLES TO FLAT (Bolted Aluminum Connector, Type A7MM1, Bolted Terminal, Two Cables to Flat, One-Cap Design. Cable Size AAC 600-1500, Cable Size ACSR 636-1272, Cable Diameter .891-1.412 inch, 8-1/2 X 3-5/8 inch X 7/8 inch thick. Connectors supplied with clamping hardware in accordance with NEMA standard CC 1. All pads are finished on both sides. E4560M is for special Pad Configuration.)
|
ABB
|
|
7TAA266240R0380
|
BOLTED ALUM TERMINAL (Bolted Aluminum Connector, Type A7MM1, Bolted Terminal, Two Cables to Flat, One-Cap Design. Cable Size AAC 600-1500, Cable Size ACSR 636-1272, Cable Diameter .891-1.412 inch, 8-1/2 X 3-5/8 inch X 7/8 inch thick. Connectors supplied with clamping hardware in accordance with NEMA standard CC 1. All pads are finished on both sides. B is for Blank Pad, No Holes.)
|
ABB
|
|
7TAA266240R0379
|
BOT.TERM 2 CABLE TO FLAT (Bolted Aluminum Connector, Type A7MM1, Bolted Terminal, Two Cables to Flat, One-Cap Design. Cable Size AAC 600-1500, Cable Size ACSR 636-1272, Cable Diameter .891-1.412 inch, 8-1/2 X 3-5/8 inch X 7/8 inch thick. Connectors supplied with clamping hardware in accordance with NEMA standard CC 1. All pads are finished on both sides. EH is for Galvanized Hardware.)
|
ABB
|
|
7TAA266240R0378
|
BOLTED ALUM TERMINALS (Bolted Aluminum Connector, Type A7MM - Bolted Terminal, Two Cables to Flat. Two-Cap design, 4 inch 4-Hole NEMA Flat. Cable Size AAC 600-900, Cable Size ACSR 556.5-715.5, Cable Diameter - Min/Max .879-1.094, 7-1/4 inch X 3-1/2 inch. 1/2 inch thick. Connectors supplied with clamping hardware in accordance with NEMA standard CC 1. All pads are finished on both sides.)
|
ABB
|
|
7TAA266240R0377
|
BOLTED SUBSTATION CONNECTOR CABLE (Bolted Aluminum Connector, Type A7MM-90 - Bolted Terminal, Two Cables to Flat at 90 Degrees. Two-Cap design, 3 inch 4-Hole NEMA Flat. Cable Size AAC 600-900, Cable Size ACSR 556.5-715.5, Cable Diameter - Min/Max .879-1.094, 3-1/2 inch. 1/2 inch thick. Connectors supplied with clamping hardware in accordance with NEMA standard CC 1. All pads are finished on both sides. EH is for Galvanized Hardware.)
|
ABB
|
|
7TAA266240R0376
|
AL Terminal 2Cables-Pad 3000AAC 90 (Aluminum Bolted Substation Terminal - 2 Cables to Pad - 45 Degree - Dual Taps, Side-by-Side, Two Caps - 230kV Maximum - 800-3000 AAC 715.5-2500 ACSR to 6X4 inch, 6-hole Pad, Stainless Steel Hardware)
|
ABB
|
|
7TAA266240R0375
|
A7MM-300E6-6NW-SS, BOLTED AL TERM. (Aluminum Bolted Substation Terminal - 2 Cables to Pad - Straight - Side-formed Pad - Dual Taps, Side-by-Side, Two Caps - 230kV Maximum - 800-3000 AAC 715.5-2500 ACSR to 6X4 inch, 6-hole Pad, Stainless Steel Hardware)
|
ABB
|
|
7TAA266240R0374
|
AL Conn 2X 2500AAC-4NN Pad 45 Deg (Bolted Aluminum Connector, Type A7MM-45 - Bolted Terminal, Two Cables to Flat at 45 Degrees. Two-Cap design, 4 inch 4-Hole NEMA Flat. Cable Size AAC 1800-2500, Cable Size ACSR 1113-2300, Cable Diameter - Min/Max 1.548-1.823, Width 5-1/4 inch. 3/4 inch thick. Connectors supplied with clamping hardware in accordance with NEMA standard CC 1. All pads are finished on both sides.)
|
ABB
|
|
7TAA266240R0373
|
BOLTED TERM 2 CABLES TO FLAT (Bolted Aluminum Connector, Type A7MM - Bolted Terminal, Two Cables to Flat. Two-Cap design, 4 inch 4-Hole NEMA Flat. Cable Size AAC 1800-2500, Cable Diameter - Min/Max 1.548-1.823, Width 10 inch x 5-1/4 inch. 3/4 inch thick. Connectors supplied with clamping hardware in accordance with NEMA standard CC 1. All pads are finished on both sides. EH is for Galvanized Hardware.)
|
ABB
|
|
7TAA266240R0372
|
AL BOLTED TEE CABLE TO FLAT (Bolted Aluminum Connector, Type A7MM-45 - Bolted Terminal, Two Cables to Flat at 45 Degrees. Two-Cap design, 3 inch 4-Hole NEMA Flat. Cable Size AAC 1800-2500, Cable Size ACSR 1113-2300, Cable Diameter - Min/Max 1.548-1.823, Width 5-1/4 inch. 3/4 inch thick. Connectors supplied with clamping hardware in accordance with NEMA standard CC 1. All pads are finished on both sides.)
|
ABB
|
|
7TAA266240R0371
|
BOLTED TERMINAL CABLE TO FLAT 90 (Bolted Aluminum Connector, Type A7MM-90 - Bolted Terminal, Two Cables to Flat at 90 Degrees. Two-Cap design, 4 inch 4-Hole NEMA Flat. Cable Size AAC 1500-2000, Cable Size ACSR 1272-1590, Cable Diameter - Min/Max 1.345-1.630, Width 4-1/2 inch. 3/4 inch thick. Connectors supplied with clamping hardware in accordance with NEMA standard CC 1. All pads are finished on both sides.)
|
ABB
|
|
7TAA266240R0368
|
BOLTED ALUM CONN 3 CABLES (Aluminum Bolted Terminal, Cable to Flat, 3 Conductors, 1800-2500 AAC to 4 X 4 inch 4-Hole Pad)
|
ABB
|
|
7TAA266240R0367
|
ALUM BOLTED TERM FOR 3 CONDUCTORS (Aluminum Bolted Terminal, Cable to Flat, 3 Conductors, 556-1500 AAC, 636-1272 ACSR to 4 X 4 inch 4-Hole Pad)
|
ABB
|
|
7TAA266240R0366
|
BOLTED TERM. CABLE-FLAT W/SSB HRWAR (Bolted Aluminum Connector, Type A7M, Bolted Terminal, Cable to Flat. 4 inch, 4-Hole NEMA Flat. Cable Size AAC 1/0-400, Cable Size ACSR 1/0-336, Cable Diameter .368-.741 inch, 3 inch X 9/16 inch. Connectors supplied with clamping hardware in accordance with NEMA standard CC 1. All pads are finished on both sides. SSB is for substitute with stainless steel Bolt, Lock washer and Silicon Bronze Nut.)
|
ABB
|
|
7TAA266240R0365
|
BOLT TERM. CBL-FLT 4HOLE HDG HDW (Bolted Aluminum Connector, Type A7M, Bolted Terminal, Cable to Flat. 4 inch, 4-Hole NEMA Flat. Cable Size AAC 1/0-400, Cable Size ACSR 1/0-336, Cable Diameter .368-.741 inch, 3 inch X 9/16 inch. Connectors supplied with clamping hardware in accordance with NEMA standard CC 1. All pads are finished on both sides. EH is for Galvanized Hardware.)
|
ABB
|
|
7TAA266240R0364
|
ALUM.BOLTED TERM,1-CABLE-FLAT EHV (Bolted Aluminum Connector, Type A7M, Bolted Terminal, Cable to Flat. 2-Hole NEMA Flat. Cable Size AAC 1/0-400, Cable Size ACSR 1/0-336, Cable Diameter .368-.741 inch, 7 inch X 3 inch X 9/16 inch. Connectors supplied with clamping hardware in accordance with NEMA standard CC 1. All pads are finished on both sides. EH is for Galvanized Hardware.)
|
ABB
|
|
7TAA266240R0363
|
A7MM-300-4NN45-EH, BOLTED ALUM. TER (Bolted Aluminum Connector, Type A7M-45 - Bolted Terminal, Cable to Flat at 45 Degrees, 4 inch 4-Hole NEMA Flat. Cable Size AAC 800-3000, Cable Size ACSR 795-2500, Cable Diameter 1.030-1.996 inch, 4-1/16 inch X 1 inch thick. Connectors supplied with clamping hardware in accordance with NEMA standard CC 1. All pads are finished on both sides. EH is for Galvanized Hardware.)
|
ABB
|
|
7TAA266240R0362
|
AL Conn 3000 AAC-4NN Pad EH (Bolted Aluminum Connector, Type A7M - Bolted Terminal, Cable to Flat, 4 inch 4-Hole NEMA Flat. Cable Size AAC 800-3000, Cable Size ACSR 795-2500, Cable Diameter 1.030-1.996 inch, 9-5/16 inch X 4-1/16 inch X 1 inch thick. Connectors supplied with clamping hardware in accordance with NEMA standard CC 1. All pads are finished on both sides. EH is for Galvanized Hardware.)
|
ABB
|
|
7TAA266240R0361
|
BOLTED TERMINAL CABLE TO FLAT (Bolted Aluminum Connector, Type A7M - Bolted Terminal, Cable to Flat, 4 Inch 4-Hole NEMA Flat. Cable Size AAC 1100-2500, Cable Size ACSR 1113-2300, Cable Diameter 1.209-1.823 inch, 4 inch X 5/8 inch thick. Connectors supplied with clamping hardware in accordance with NEMA standard CC 1. All pads are finished on both sides. E60M is for special Pad Configuration.)
|
ABB
|
|
7TAA266240R0360
|
BOLTED TERMNIAL CABLE TO FLAT (Bolted Aluminum Connector, Type A7M - Bolted Terminal, Cable to Flat, 4 Inch 4-Hole NEMA Flat. Cable Size AAC 1100-2500, Cable Size ACSR 1113-2300, Cable Diameter 1.209-1.823 inch, 4 inch X 5/8 inch thick. Connectors supplied with clamping hardware in accordance with NEMA standard CC 1. All pads are finished on both sides. E50M is for special Pad Configuration.)
|
ABB
|
|
7TAA266240R0359
|
BOLTED TERMINAL CABLE TO FLAT (Bolted Aluminum Connector, Type A7M - Bolted Terminal, Cable to Flat, 4 Inch 4-Hole NEMA Flat. Cable Size AAC 1100-2500, Cable Size ACSR 1113-2300, Cable Diameter 1.209-1.823 inch, 4 inch X 5/8 inch thick. Connectors supplied with clamping hardware in accordance with NEMA standard CC 1. All pads are finished on both sides. E40M is for special Pad Configuration.)
|
ABB
|
|
7TAA266240R0358
|
BOLTED TERMINAL CABLE TO FLAT (Bolted Aluminum Connector, Type A7M-90 - Bolted Terminal, Cable to Flat at 90 Degrees, 4 Inch 4-Hole NEMA Flat. Cable Size AAC 1100-2500, Cable Size ACSR 1113-2300, Cable Diameter 1.209-1.823 inch, 4 inch X 5/8 inch thick. Connectors supplied with clamping hardware in accordance with NEMA standard CC 1. All pads are finished on both sides. EH is for Galvanized Hardware.)
|
ABB
|
|
7TAA266240R0357
|
AL BOLTED SUBSTA TERMINAL STRAIGHT (Aluminum Bolted Substation Terminal (Straight - Side Formed Pad) - Cable to Pad - 1100-2500AAC 1113-2300ACSR to 4 X 4 inch 4 hole Pad, with Galvanized Steel Hardware)
|
ABB
|
|
7TAA266240R0356
|
BOLTED TERMINAL CABLE TO FLAT (Bolted Aluminum Connector, Type A7M-90 - Bolted Terminal, Cable to Flat at 90 Degrees, 3 Inch 4-Hole NEMA Flat. Cable Size AAC 1100-2500, Cable Size ACSR 1113-2300, Cable Diameter 1.209-1.823 inch, 4 inch X 5/8 inch thick. Connectors supplied with clamping hardware in accordance with NEMA standard CC 1. All pads are finished on both sides. SS is for Substitute with Stainless Steel Hardware.)
|
ABB
|
|
7TAA266240R0355
|
BOLTED ALUM TERMINAL CABLE TO FLAT (Bolted Aluminum Connector, Type A7M-45 - Bolted Terminal, Cable to Flat at 45 Degrees, 3 Inch 4-Hole NEMA. Cable Size AAC 1100-2500, Cable Size ACSR 1113-2300, Cable Diameter 1.209-1.823 inch, 4 inch X 5/8 inch thick. Connectors supplied with clamping hardware in accordance with NEMA standard CC 1. All pads are finished on both sides. SS is for Substitute with Stainless Steel Hardware.)
|
ABB
|
Òîâàðû
4441 - 4470 èç 23691
Íà÷àëî
|
Ïðåä.
|
147
148
149
150
151
|
Ñëåä. |
Êîíåö
|
