Àðòèêóë |
Íàèìåíîâàíèå |
Ïðîèçâîäèòåëü |
2TLA019995R0500
|
JSHD4-2-AD-A Enabling Switch (Three-position device. Top part with LEDs, front button and top button. Bottom part with M12-8 connector and anti-tamper PCB.)
|
ABB
|
2TLA019995R1100
|
JSHD4-2-AJ-A Enabling Switch (Three-position device. Top part with LEDs, front button and top button. Bottom part with cable gland and PCB with 16 screw connections and anti-tamper PCB.)
|
ABB
|
2TLA019995R0900
|
JSHD4-2-AH-A Enabling Switch (Three-position device. Top part with LEDs, front button and top button. Bottom part with cable gland and PCB with 10 screw connections and anti-tamper PCB.)
|
ABB
|
2TLA019995R0800
|
JSHD4-2-AH Enabling Switch (Three-position device. Top part with LEDs, front button and top button. Bottom part with cable gland and PCB with 10 screw connections.)
|
ABB
|
2TLA019995R1300
|
JSHD4-3-AB-A Enabling Switch (Three-position device. Top part with LEDs and no extra buttons. Bottom part with Cannon connector and anti-tamper PCB.)
|
ABB
|
2TLA019995R1200
|
JSHD4-3-AB Enabling Switch (Three-position device. Top part with LEDs and no extra buttons. Bottom part with Cannon connector.)
|
ABB
|
2TLA020006R2300
|
JSHD4-3 Top part, LED, Anti-tamper tape
|
ABB
|
2TLA019995R1600
|
JSHD4-3-AE Enabling Switch (Three-position device. Top part with LEDs and no extra buttons. Bottom part with M12-8 connector and emergency stop.)
|
ABB
|
2TLA019995R1500
|
JSHD4-3-AD-A Enabling Switch (Three-position device. Top part with LEDs and no extra buttons. Bottom part with M12-8 connector and anti-tamper PCB.)
|
ABB
|
2TLA019995R1400
|
JSHD4-3-AD Enabling Switch (Three-position device. Top part with LEDs and no extra buttons. Bottom part with M12-8 connector.)
|
ABB
|
2TLA019995R1900
|
JSHD4-3-AG Enabling Switch (Three-position device. Top part with LEDs and no extra buttons. Bottom part with M12-5 connector and 1 AS-i node (without front and top button).)
|
ABB
|
2TLA019995R1800
|
JSHD4-3-AF-A Enabling Switch (Three-position device. Top part with LEDs and no extra buttons. Bottom part with M12-5 connector and 2 AS-i nodes (for front and top button) and anti-tamper PCB.)
|
ABB
|
2TLA019995R1700
|
JSHD4-3-AF Enabling Switch (Three-position device. Top part with LEDs and no extra buttons. Bottom part with M12-5 connector and 2 AS-i nodes (for front and top button).)
|
ABB
|
2TLA019995R2200
|
JSHD4-3-AJ Enabling Switch (Three-position device. Top part with LEDs and no extra buttons. Bottom part with cable gland and PCB with 16 screw connections.)
|
ABB
|
2TLA019995R2100
|
JSHD4-3-AH-A Enabling Switch (Three-position device. Top part with LEDs and no extra buttons. Bottom part with cable gland and PCB with 10 screw connection and anti-tamper PCB.)
|
ABB
|
2TLA019995R2000
|
JSHD4-3-AH Enabling Switch (Three-position device. Top part with LEDs and no extra buttons. Bottom part with cable gland and PCB with 10 screw connections.)
|
ABB
|
2TLA020072R0600
|
URAX-E1 (Safe input slave for AS-i bus for two-hand control devices according to EN 574 type IIIC.)
|
ABB
|
2TLA020072R0500
|
URAX-D1R (Safe input slave for AS-i bus for devices with OSSD outputs + 3 non-safe outputs + input for local reset. Ex. of devices: Orion light guards. Black AS-i cable needed.')
|
ABB
|
2TLA020072R0400
|
URAX-C1R (Safe input slave for AS-i bus for safety devices with two potential free contacts (NO+NO or NO+NC) + input for local reset. Ex. of devices: emergency stop buttons and safety switches.)
|
ABB
|
2TLA020072R0000
|
URAX-A1 (Safe input slave for AS-i bus for DYNlink devices + 1 non-safe output. Ex. of devices: Eden DYN. Up to three devices in series.)
|
ABB
|
2TLA020072R0300
|
URAX-C1 (Safe input slave for AS-i bus for safety devices with two potential free contacts, NO+NO or NO+NC, lile emergency stop buttons and safety switches. Ex. of devices: Smile and Mkey.)
|
ABB
|
2TLA020072R0200
|
URAX-B1R (Safe input slave for AS-i bus for DYNlink devices+ 3 non-safe outputs + input for local reset. Ex. of devices: Magne, Knox and Dalton. Up to 10 devices in series. Black AS-i cable needed.)
|
ABB
|
2TLA020072R0100
|
URAX-A1R (Safe input slave for AS-i bus for DYNlink devices + 1 non-safe output + input for local reset. Ex. of devices: Eden DYN. Up to 3 devices in series.)
|
ABB
|
2TLA020057R0000
|
C5 cable 5x0.34mm2 shielded (Cable 5 x 0.34 mm2 + shield. Sold per meter, specify length.)
|
ABB
|
2TLA020057R2000
|
C13 cable (11x0.51 + 2x0.82) shielded (Cable 11 x 0.51 mm2 + 2 x 0.82 mm2 + screen, specify length. Recommended to use with a Tina 8A.)
|
ABB
|
2TLA020055R1100
|
M12-C02 M12-5 male screw connector (Straight M12-5 male connector with cable screw connection. Cable diameter range 2.5òÀÓ6.5 mm.)
|
ABB
|
2TLA020057R1500
|
C9 cable 9-pole(7x0.51 + 2x0.82) shielded (Cable 7 x 0.51 mm2 + 2 x 0.82 mm2 + screen, specify length. Recommended to use with a Tina 4A.)
|
ABB
|
2TLA020055R1000
|
M12-C01 M12-5 female screw connector (Straight M12-5 female connector with cable screw connection. Cable diameter range 2.5òÀÓ6.5 mm.)
|
ABB
|
2TLA020055R0200
|
M12-3E M12 Y-connector (M12 Y-connector for the connection of 2 DYNlink devices or one DYNlink and one light button to Pluto safety PLC with only one cable. One M12-5 female connector (#2) for connection of the first circuit. One M12-5 female connector (#3) for connection of the second circuit. One M12-5 male connector (#1) for connection to IQs on the Pluto safety PLC.)
|
ABB
|
2TLA020055R0300
|
M12-3D M12 Y-connector (M12 Y-connector for easier installation of a light guard with transmitter and receiver. One M12-8 female connector for the receiver (#2), one M12-5 female connector for the transmitter (#3) and one M12-8 male connector (#1) for cabling to safety control unit.)
|
ABB
|