1SVR4
| Àðòèêóë |
Íàèìåíîâàíèå |
Ïðîèçâîäèòåëü |
|
1SVR427014R0000
|
CP-S 24/5.0 Power supply In:110-240VAC/100-350VDC Out:DC 24V/5A (The CP-S 24/5.0 is a power supply from the CP-S range. The primary switch mode power supply offers a wide range input of 85-264 V AC and 100-350 V DC, rated input voltage is 110-240 V AC. The rated output power is 120 W, rated output current is 5 A at an output voltage of 24 V DC. The output voltage is adjustable within a range of 22 to 28 V DC. The power supply provides a U/I output characteristic with a power reserve of up to 50 % and allows parallel operation to enable redundancy. A further feature are pluggable connecting terminals. Redundancy unit and control module are available as accessories.)
|
ABB
|
|
1SVR423418R9000
|
CP-RUD Redundancy unit, up to 5A (The CP-RUD is a redundancy unit for CP-E range power supplies. This module, with 2 inputs each up to 2.5 A and an output up to 5 A, provides decoupling of two CP-E range power supplies with an output )
|
ABB
|
|
1SVR402902R2000
|
CM-HCT Suspension electrode crimpable, suitable for drinking water
|
ABB
|
|
1SVR402902R1000
|
CM-HC Suspension electrode crimpable, standard
|
ABB
|
|
1SVR402902R0000
|
CM-HE Suspension electrode (Dipped electrode for eveluating liquid levels)
|
ABB
|
|
1SVR440005R0100
|
COV.02 Sealable cover 45mm (The COV.02 sealable transparent cover is an accessory. The cover can be used for protection against unauthorized changes. It fits to all N housings.)
|
ABB
|
|
1SVR430043R0000
|
MAR.02 Marker label, for devices with DIP switches (The MAR.02 marker label is a spare part. The marker label is suitable for devices with S and N housings with front-face DIP switches.)
|
ABB
|
|
1SVR430005R0100
|
COV.01 Sealable cover 22.5mm (The COV.01 sealable transparent cover is an accessory. The cover can be used for protection against unauthorized changes. It fits to all S housings.)
|
ABB
|
|
1SVR440711R1300
|
CL-LST.C12DC2 Logic relay 24VDC, 8I/4O, transistor (The CL-LST.C12DC2 is a logic relay from the CL range. It has 8 digital inputs and 4 transistor outputs. The logic relay operates with an input voltage of 24 V DC and is equipped with an onboard display and a keypad. 128 rungs with 3 contacts in series plus 1 coil can be programmed. The following functions are available: 16 freely editable display texts, 8 week and 8 year timers, 16 multifunction timing relays, 4 operating hours counters, 16 analog value comparators, threshold value switches, 2 high-speed counters and 2 frequency counters.)
|
ABB
|
|
1SVR440711R0200
|
CL-LSR.CX12DC2 Logic relay 24VDC, 8I/4O, relay (The CL-LSR.CX12DC2 is a logic relay from the CL range. It has 8 digital inputs and 4 relay outputs. The logic relay operates with an input voltage of 24 V DC. 128 rungs with 3 contacts in series plus 1 coil can be programmed. The following functions are available: 8 week and 8 year timers, 16 multifunction timing relays, 4 operating hours counters, 16 analog value comparators, threshold value switches, 2 high-speed counters and 2 frequency counters.)
|
ABB
|
|
1SVR430750R0400
|
CM-EFS.2 Voltage window monitoring relay 2c/o, B-C=3-600VRMS, 24-240VAC/DC (The CM-EFS.2 is a single-functional voltage monitoring relay from the CM single-phase monitors range. This monitoring relay operates with a rated control supply voltage of 24 - 240 V AC / DC and has a 2 c/o (SPDT) output with contacts rated at 250 V / 4 A. It provides a RMS measuring principle for DC and AC voltages with 4 measuring ranges: 3-30 V, 6-60 V, 30-300 V and 60-600 V. The CM-EFS.2 offers window (over- and undervoltage) monitoring as well as selection of ON- or OFF-delay, open- or closed-circuit operating principle, with or without latching function. The output contacts can be configured as 1x2 c/o (SPDT) (common signal) or 2x1 c/o (SPDT) (separate signal for minimum and maximum thresholds) operation. The hysteresis is fixed at 5 % of the threshold value. The tripping delay and the start-up delay are adjustable over a range of instantaneous to 30 s (0, 0.1-30 s). A sealable transparent cover for protection against unauthorized changes is available as accessory.)
|
ABB
|
|
1SVR430851R1200
|
CM-ENS UP/DOWN Liquid level relay 1c/o, sensitivity 5-100kOhm, 220-240VAC (Liquid level relay CM-ENS up/down width 22.5mm, level control of conductive liquids, switchable function for filling or emptying, sensitivity 5-100kOhm adjustable, A1-A2=220-240VAC, 1 c/o (closed-circuit principle))
|
ABB
|
|
1SVR430851R9200
|
CM-ENS UP/DOWN Liquid level relay 1c/o, sensitivity 5-100kOhm, 24VAC (Liquid level relay CM-ENS up/down width 22.5mm, level control of conductive liquids, switchable function for filling or emptying, sensitivity 5-100kOhm adjustable, A1-A2=24VAC, 1 c/o (closed-circuit principle))
|
ABB
|
|
1SVR430851R0200
|
CM-ENS UP/DOWN Liquid level relay 1c/o, sensitivity 5-100kOhm, 110-130VAC (Liquid level relay CM-ENS up/down width 22.5mm, level control of conductive liquids, switchable function for filling or emptying, sensitivity 5-100kOhm adjustable, A1-A2=110-130VAC, 1 c/o (closed-circuit principle))
|
ABB
|
|
1SVR450050R0000
|
CM-ENN Liquid level relay 2c/o, sensitiv. 0.25-500kOhm, 110-130VAC (Liquid level relay CM-ENN width 45mm, level control of conductive liquids, sensitivity 0.25-500kOhm adjustable, choice of ON- or OFF-delay from 0.1-10s, A1-A2=110-130VAC, 2 c/o (open-circuit principle))
|
ABB
|
|
1SVR450051R0000
|
CM-ENN Liquid level relay 2c/o, sensitiv. 0.25-500kOhm, 220-240VAC (Liquid level relay CM-ENN width 45mm, level control of conductive liquids, sensitivity 0.25-500kOhm adjustable, choice of ON- or OFF-delay from 0.1-10s, A1-A2=220-240VAC, 2 c/o (open-circuit principle))
|
ABB
|
|
1SVR450056R0100
|
CM-SE-600 Screw-in bar electrode 600mm, for compact support KH-3
|
ABB
|
|
1SVR450056R0000
|
CM-SE-300 Screw-in bar electrode 300mm, for compact support KH-3
|
ABB
|
|
1SVR450056R0200
|
CM-SE-1000 Screw-in bar electrode 1000mm, for compact support KH-3
|
ABB
|
|
1SVR430851R1100
|
CM-ENS Liquid level relay 1c/o, sensitivity 5-100kOhm, 220-240VAC (Liquid level relay CM-ENS width 22.5mm, level control of conductive liquids, sensitivity 5-100kOhm adjustable, A1-A2=220-240VAC, 1 c/o (open-circuit principle))
|
ABB
|
|
1SVR430851R0100
|
CM-ENS Liquid level relay 1c/o, sensitivity 5-100kOhm, 110-130VAC (Liquid level relay CM-ENS width 22.5mm, level control of conductive liquids, sensitivity 5-100kOhm adjustable, A1-A2=110-130VAC, 1 c/o (open-circuit principle))
|
ABB
|
|
1SVR430851R1300
|
CM-ENS Liquid level relay 1c/o, sensitivity 5-100kOhm, 220-240VAC (Liquid level relay CM-ENS width 22.5mm, level control of conductive liquids, sensitivity 5-100kOhm adjustable, A1-A2=220-240VAC, safety isolation acc. VDE 0160, 1 c/o (open-circuit principle))
|
ABB
|
|
1SVR430851R9100
|
CM-ENS Liquid level relay 1c/o, sensitivity 5-100kOhm, 24VAC (Liquid level relay CM-ENS width 22.5mm, level control of conductive liquids, sensitivity 5-100kOhm adjustable, A1-A2=24VAC, 1 c/o (open-circuit principle))
|
ABB
|
|
1SVR450059R0000
|
CM-ENN Liquid level relay 2c/o, sensitivity 0.25-500kOhm, 24VAC/DC (Liquid level relay CM-ENN width 45mm, level control of conductive liquids, sensitivity 0.25-500kOhm adjustable, choice of ON- or OFF-delay from 0.1-10s, A1-A2=24VAC, 2 c/o (open-circuit principle))
|
ABB
|
|
1SVR450055R0000
|
CM-ENN Liquid level relay 2c/o, sensitiv.0.25-500kOhm,24-240VAC/DC (Liquid level relay CM-ENN width 45mm, level control of conductive liquids, sensitivity 0.25-500kOhm adjustable, choice of ON- or OFF-delay from 0.1-10s, A1-A2=24-240V AC / DC, 2 c/o (open-circuit principle))
|
ABB
|
|
1SVR430261R5000
|
CT-VBS.18 Time relay, OFF-delay, DC-coil Input voltage 200-240VAC (The CT-VBS.18 is a single-function electronic time relay from the CT-S timer range. It provides an OFF-delay (true delay on break) function without auxiliary voltage for DC coils. The time delay depends on the coil drop-out voltage and on the wattage of the contactor coil. This time relay operates with a rated control supply voltage of 200 - 240 V AC. A sealable transparent cover for protection against unauthorized changes is available as accessory.)
|
ABB
|
|
1SVR430261R6000
|
CT-VBS.17 Time relay, OFF-delay, DC-coil Input voltage 110-127VAC (The CT-VBS.17 is a single-function electronic time relay from the CT-S timer range. It provides an OFF-delay (true delay on break) function without auxiliary voltage for DC coils. The time delay depends on the coil drop-out voltage and on the wattage of the contactor coil. This time relay operates with a rated control supply voltage of 110 - 127 V AC. A sealable transparent cover for protection against unauthorized changes is available as accessory.)
|
ABB
|
Òîâàðû
391 - 417 èç 417
Íà÷àëî
|
Ïðåä.
|
10
11
12
13
14
|
Ñëåä. | Êîíåö
|
