1SVR0
| Àðòèêóë |
Íàèìåíîâàíèå |
Ïðîèçâîäèòåëü |
|
1SVR011737R1000
|
CC-E RTD/I Temp. converter, singlef. PT100 0...300??C / 0-20mA, 24VDC (The CC-E RTD/I is a single-function temperature signal converter from the CC-E range. This converter, with 3-way electrical isolation, for RTD sensors (PT100, 2- or 3-wire connection), operates with a rated control supply voltage of 24 V DC. It provides an input temperature range of 0òÀæ300 ??C and an output signal range of 0-20 mA. Applied supply voltage is displayed by a green LED.)
|
ABB
|
|
1SVR011727R1600
|
CC-E I/I Signal converter, singlef. 4-20mA / 0-20mA, 110-240VAC (The CC-E I/I is a single-function standard analog signal converter from the CC-E range. This converter, with 3-way electrical isolation, operates with a rated control supply voltage of 110-240 V AC. It provides an input signal range of 4-20 mA and an output signal range of 0-20 mA. Applied supply voltage is displayed by a green LED.)
|
ABB
|
|
1SVR011725R1400
|
CC-E I/I Signal converter, singlef. 0-20mA / 4-20mA, 110-240VAC (The CC-E I/I is a single-function standard analog signal converter from the CC-E range. This converter, with 3-way electrical isolation, operates with a rated control supply voltage of 110-240 V AC. It provides an input signal range of 0-20 mA and an output signal range of 4-20 mA. Applied supply voltage is displayed by a green LED.)
|
ABB
|
|
1SVR011724R1300
|
CC-E I/I Signal converter, singlef. 0-20mA / 0-20mA, 110-240VAC (The CC-E I/I is a single-function standard analog signal converter from the CC-E range. This converter, with 3-way electrical isolation, operates with a rated control supply voltage of 110-240 V AC. It provides an input signal range of 0-20 mA and an output signal range of 0-20 mA. Applied supply voltage is displayed by a green LED.)
|
ABB
|
|
1SVR011728R2700
|
CC-E I/I Signal converter, singlef. 4-20mA / 4-20mA, 110-240VAC (The CC-E I/I is a single-function standard analog signal converter from the CC-E range. This converter, with 3-way electrical isolation, operates with a rated control supply voltage of 110-240 V AC. It provides an input signal range of 4-20 mA and an output signal range of 4-20 mA. Applied supply voltage is displayed by a green LED.)
|
ABB
|
|
1SVR011714R1100
|
CC-E I/I Signal converter, singlef. 0-20mA / 0-20mA, 24VDC (The CC-E I/I is a single-function standard analog signal converter from the CC-E range. This converter, with 3-way electrical isolation, operates with a rated control supply voltage of 24 V DC. It provides an input signal range of 0-20 mA and an output signal range of 0-20 mA. Applied supply voltage is displayed by a green LED.)
|
ABB
|
|
1SVR011718R2500
|
CC-E I/I Signal converter, singlef. 4-20mA / 4-20mA, 24VDC (The CC-E I/I is a single-function standard analog signal converter from the CC-E range. This converter, with 3-way electrical isolation, operates with a rated control supply voltage of 24 V DC. It provides an input signal range of 4-20 mA and an output signal range of 4-20 mA. Applied supply voltage is displayed by a green LED.)
|
ABB
|
|
1SVR011717R1400
|
CC-E I/I Signal converter, singlef. 4-20mA / 0-20mA, 24VDC (The CC-E I/I is a single-function standard analog signal converter from the CC-E range. This converter, with 3-way electrical isolation, operates with a rated control supply voltage of 24 V DC. It provides an input signal range of 4-20 mA and an output signal range of 0-20 mA. Applied supply voltage is displayed by a green LED.)
|
ABB
|
|
1SVR011741R2400
|
CC-E RTD/I Temp. converter, singlef. PT100 -50...+250??C / 4-20mA,24VDC (The CC-E RTD/I is a single-function temperature signal converter from the CC-E range. This converter, with 3-way electrical isolation, for RTD sensors (PT100, 2- or 3-wire connection), operates with a rated control supply voltage of 24 V DC. It provides an input temperature range of -50...+250 ??C and an output signal range of 4-20 mA. Applied supply voltage is displayed by a green LED.)
|
ABB
|
|
1SVR011789R2500
|
CC-E RTD/I Temp. converter, singlef. PT100 0-100??C / 0-20mA, 110-240VAC (The CC-E RTD/I is a single-function temperature signal converter from the CC-E range. This converter, with 3-way electrical isolation, for RTD sensors (PT100, 2- or 3-wire connection), operates with a rated control supply voltage of 110-240 V AC. It provides an input temperature range of 0òÀæ100 ??C and an output signal range of 0-20 mA. Applied supply voltage is displayed by a green LED.)
|
ABB
|
|
1SVR011707R2300
|
CC-E/TC Temp. converter, univers. J/K / V/I, 110-240VAC (The CC-E/TC is an universal temperature signal converter from the CC-E range. This converter, with 3-way electrical isolation, for thermocouples types J and K, operates with a rated control supply voltage of 110-240 V AC. It provides a configurable detection of input signal interruption (low fail safe / high fail safe). The 2 input signal ranges (thermocouple type J: 0òÀæ600 ??C, type K: 0òÀæ1000 ??C) and the 3 output signal ranges (0-10 V, 0-20 mA, 4-20 mA) can be configured by means of directly accessible lateral DIP switches. The adjustment of the gain and the offset is made via potentiometers on the front of the unit. Applied supply voltage is displayed by a green LED.)
|
ABB
|
|
1SVR011755R2200
|
CC-E TC/I Temp. converter, singlef. K 0-1000??C / 4-20mA, 24VDC (The CC-E TC/I is a single-function temperature signal converter from the CC-E range. This converter, with 3-way electrical isolation, for thermocouples type K, operates with a rated control supply voltage of 24 V DC. It provides an input signal range of 0òÀæ1000 ??C and an output signal range of 4-20 mA. Applied supply voltage is displayed by a green LED.)
|
ABB
|
|
1SVR011754R2100
|
CC-E TC/I Temp. converter, singlef. K 0-1000??C / 0-20mA, 24VDC (The CC-E TC/I is a single-function temperature signal converter from the CC-E range. This converter, with 3-way electrical isolation, for thermocouples type K, operates with a rated control supply voltage of 24 V DC. It provides an input signal range of 0òÀæ1000 ??C and an output signal range of 0-20 mA. Applied supply voltage is displayed by a green LED.)
|
ABB
|
|
1SVR011764R2300
|
CC-E TC/I Temp. converter, singlef. K 0-1000??C / 0-20mA, 110-240VAC (The CC-E TC/I is a single-function temperature signal converter from the CC-E range. This converter, with 3-way electrical isolation, for thermocouples type K, operates with a rated control supply voltage of 110-240 V AC. It provides an input signal range of 0òÀæ1000 ??C and an output signal range of 0-20 mA. Applied supply voltage is displayed by a green LED.)
|
ABB
|
|
1SVR011719R2600
|
CC-E V/V Signal converter, singlef. -10...+10V / -10...+10V 24VDC (The CC-E V/V is a single-function standard analog signal converter from the CC-E range. This converter, with 3-way electrical isolation, operates with a rated control supply voltage of 24 V DC. It provides an input signal range of -10...+10 V and an output signal range of -10...+10 V. Applied supply voltage is displayed by a green LED.)
|
ABB
|
|
1SVR011722R1100
|
CC-E V/I Signal converter, singlef. 0-10V / 4-20mA, 110-240VAC (The CC-E V/I is a single-function standard analog signal converter from the CC-E range. This converter, with 3-way electrical isolation, operates with a rated control supply voltage of 110-240 V AC. It provides an input signal range of 0-10 V and an output signal range of 4-20 mA. Applied supply voltage is displayed by a green LED.)
|
ABB
|
|
1SVR011711R1600
|
CC-E V/I Signal converter, singlef. 0-10V / 0-20mA, 24VDC (The CC-E V/I is a single-function standard analog signal converter from the CC-E range. This converter, with 3-way electrical isolation, operates with a rated control supply voltage of 24 V DC. It provides an input signal range of 0-10 V and an output signal range of 0-20 mA. Applied supply voltage is displayed by a green LED.)
|
ABB
|
|
1SVR011712R1700
|
CC-E V/I Signal converter, singlef. 0-10V / 4-20mA, 24VDC (The CC-E V/I is a single-function standard analog signal converter from the CC-E range. This converter, with 3-way electrical isolation, operates with a rated control supply voltage of 24 V DC. It provides an input signal range of 0-10 V and an output signal range of 4-20 mA. Applied supply voltage is displayed by a green LED.)
|
ABB
|
|
1SVR011721R1000
|
CC-E V/I Signal converter, singlef. 0-10V / 0-20mA, 110-240VAC (The CC-E V/I is a single-function standard analog signal converter from the CC-E range. This converter, with 3-way electrical isolation, operates with a rated control supply voltage of 110-240 V AC. It provides an input signal range of 0-10 V and an output signal range of 0-20 mA. Applied supply voltage is displayed by a green LED.)
|
ABB
|
|
1SVR011753R2000
|
CC-E TC/V Temp. converter, singlef. K 0-1000??C / 0-10V, 24VDC (The CC-E TC/V is a single-function temperature signal converter from the CC-E range. This converter, with 3-way electrical isolation, for thermocouples type K, operates with a rated control supply voltage of 24 V DC. It provides an input signal range of 0òÀæ1000 ??C and an output signal range of 0-10 V. Applied supply voltage is displayed by a green LED.)
|
ABB
|
|
1SVR011701R2500
|
CC-E/RTD Temp. converter, univers. PT100 / V/I, 24VDC (The CC-E/RTD is an universal temperature signal converter from the CC-E range. This converter, with 3-way electrical isolation, for RTD sensors (PT100, 2- or 3-wire connection), operates with a rated control supply voltage of 24 V DC and provides a configurable detection of input signal interruption (low fail safe / high fail safe). The 6 input temperature ranges (0òÀæ100 ??C, 0òÀæ300 ??C, 0òÀæ500 ??C, -50òÀæ+ 50 ??C, -50òÀæ+250 ??C, -50òÀæ+450 ??C) and the 3 output signal ranges (0-10 V, 0-20 mA, 4-20 mA) can be configured by means of directly accessible lateral DIP switches. The adjustment of the gain and the offset is made via potentiometers on the front of the unit. Applied supply voltage is displayed by a green LED.)
|
ABB
|
|
1SVR011706R2200
|
CC-E/RTD Temp. converter, univers. PT100 / V/I, 110-240VAC (The CC-E/RTD is an universal temperature signal converter from the CC-E range. This converter, with 3-way electrical isolation, for RTD sensors (PT100, 2- or 3-wire connection), operates with a rated control supply voltage of 110-240 V AC and provides a configurable detection of input signal interruption (low fail safe / high fail safe). The 6 input temperature ranges (0òÀæ100 ??C, 0òÀæ300 ??C, 0òÀæ500 ??C, -50òÀæ+ 50 ??C, -50òÀæ+250 ??C, -50òÀæ+450 ??C) and the 3 output signal ranges (0-10 V, 0-20 mA, 4-20 mA) can be configured by means of directly accessible lateral DIP switches. The adjustment of the gain and the offset is made via potentiometers on the front of the unit. Applied supply voltage is displayed by a green LED.)
|
ABB
|
|
1SVR011708R0400
|
CC-E/I Current converter, univers. 0-5A, 0-20A/AC/DC / V/I, 110-240VAC (The CC-E/I is an universal current measuring converter from the CC-E range. This converter, with 3-way electrical isolation, for sinusoidal and DC currents, operates with a rated control supply voltage of 110-240 V AC. Selection of one of 2 input current signal ranges (0-5 A, 0-20 A, AC / DC) is made by the corresponding terminal connection. 3 output signal ranges (0-10 V, 0-20 mA, 4-20 mA) can be configured by means of directly accessible lateral DIP switches. The adjustment of the gain and the offset is made via potentiometers on the front of the unit. Applied supply voltage is displayed by a green LED.)
|
ABB
|
|
1SVR040009R1400
|
CC-U/V Universal signal converter 110-240VAC 50/60Hz / 100-300VDC (The CC-U/V is a measuring converter from the CC-U range. This converter, with 3-way electrical isolation, for voltage RMS values of any wave form, operates with a rated control supply voltage of 110-240 V AC. It provides short-circuit proof signal outputs and pluggable connecting terminals. 8 input voltage signal ranges (0-100 V, 0-150 V, 0-250 V, 0-300 V, 0-400 V, 0-450 V, 0-550 V, 0-600 V) are selectable with a front-face rotary switch. 41 output signal ranges (8 standard and 33 non-standard) can be configured by means of directly accessible lateral DIP switches. The gain and the offset adjustment is made via front-face operating elements. Applied supply voltage is displayed by a green LED.)
|
ABB
|
|
1SVR040008R1300
|
CC-U/V Universal signal converter 24-48VDC / 24VAC 50/60Hz (The CC-U/V is a measuring converter from the CC-U range. This converter, with 3-way electrical isolation, for voltage RMS values of any wave form, operates with a rated control supply voltage of 24-48 V DC. It provides short-circuit proof signal outputs and pluggable connecting terminals. 8 input voltage signal ranges (0-100 V, 0-150 V, 0-250 V, 0-300 V, 0-400 V, 0-450 V, 0-550 V, 0-600 V) are selectable with a front-face rotary switch. 41 output signal ranges (8 standard and 33 non-standard) can be configured by means of directly accessible lateral DIP switches. The gain and the offset adjustment is made via front-face operating elements. Applied supply voltage is displayed by a green LED.)
|
ABB
|
|
1SVR040015R2100
|
CC-U/TCR Universal signal converter 110-240VAC 50/60Hz / 100-300VDC (The CC-U/TCR is an universal signal converter from the CC-U range. This converter, with relay outputs and with 3-way electrical isolation, for thermocouples types K, J, T, and S, operates with a rated control supply voltage of 110-240 V AC and provides pluggable connecting terminals. The temperature ranges for the 4 different thermocouples as well as open- or closed-circuit operating principle can be configured by means of directly accessible lateral DIP switches. This converter has 2 threshold relay outputs with one c/o (SPDT) contact each. The threshold values and the respective hysteresis can be adjusted independently from each other with front-face potentiometers. Applied supply voltage is displayed by a green LED and two yellow LEDs display the state of the output relays.)
|
ABB
|
|
1SVR040014R2000
|
CC-U/TCR Universal signal converter 24-48VDC / 24VAC 50/60Hz (The CC-U/TCR is an universal signal converter from the CC-U range. This converter, with relay outputs and with 3-way electrical isolation, for thermocouples types K, J, T, and S, operates with a rated control supply voltage of 24-48 V DC and provides pluggable connecting terminals. The temperature ranges for the 4 different thermocouples as well as open- or closed-circuit operating principle can be configured by means of directly accessible lateral DIP switches. This converter has 2 threshold relay outputs with one c/o (SPDT) contact each. The threshold values and the respective hysteresis can be adjusted independently from each other with front-face potentiometers. Applied supply voltage is displayed by a green LED and two yellow LEDs display the state of the output relays.)
|
ABB
|
|
1SVR011702R2600
|
CC-E/TC Temp. converter, univers. J/K / V/I, 24VDC (The CC-E/TC is an universal temperature signal converter from the CC-E range. This converter, with 3-way electrical isolation, for thermocouples types J and K, operates with a rated control supply voltage of 24 V DC. It provides a configurable detection of input signal interruption (low fail safe / high fail safe). The 2 input signal ranges (thermocouple type J: 0òÀæ600 ??C, type K: 0òÀæ1000 ??C) and the 3 output signal ranges (0-10 V, 0-20 mA, 4-20 mA) can be configured by means of directly accessible lateral DIP switches. The adjustment of the gain and the offset is made via potentiometers on the front of the unit. Applied supply voltage is displayed by a green LED.)
|
ABB
|
|
1SVR011705R2100
|
CC-E/STD Signal converter, univers. V/I / V/I, 110-240VAC (The CC-E/STD is an universal standard analog signal converter from the CC-E range. This converter, with 3-way electrical isolation, operates with a rated control supply voltage of 110-240 V AC. The 4 input signal ranges (0-5 V, 0-10 V, 0-20 mA, 4-0 mA) and the 4 output signal ranges (0-5 V, 0-0 V, 0-20 mA, 4-20 mA) can be configured by means of directly accessible lateral DIP switches. The adjustment of the gain and the offset is made via potentiometers on the front of the unit. Applied supply voltage is displayed by a green LED.)
|
ABB
|
|
1SVR011700R0000
|
CC-E/STD Signal converter, univers. V/I / V/I, 24VDC (The CC-E/STD is an universal standard analog signal converter from the CC-E range. This converter, with 3-way electrical isolation, operates with a rated control supply voltage of 24 V DC. The 4 input signal ranges (0-5 V, 0-10 V, 0-20 mA, 4-0 mA) and the 4 output signal ranges (0-5 V, 0-0 V, 0-20 mA, 4-20 mA) can be configured by means of directly accessible lateral DIP switches. The adjustment of the gain and the offset is made via potentiometers on the front of the unit. Applied supply voltage is displayed by a green LED.)
|
ABB
|
|
1SVR011703R2700
|
CC-E/I Current converter, univers. 0-5A, 0-20A/AC/DC / V/I, 24VDC (The CC-E/I is an universal current measuring converter from the CC-E range. This converter, with 3-way electrical isolation, for sinusoidal and DC currents, operates with a rated control supply voltage of 24 V DC. Selection of one of 2 input current signal ranges (0-5 A, 0-20 A, AC / DC) is made by the corresponding terminal connection. 3 output signal ranges (0-10 V, 0-20 mA, 4-20 mA) can be configured by means of directly accessible lateral DIP switches. The adjustment of the gain and the offset is made via potentiometers on the front of the unit. Applied supply voltage is displayed by a green LED.)
|
ABB
|
|
1SVR011729R2000
|
CC-E V/V Signal converter, singlef. -10...+10V / -10...+10V 110-240VAC (The CC-E V/V is a single-function standard analog signal converter from the CC-E range. This converter, with 3-way electrical isolation, operates with a rated control supply voltage of 110-240 V AC. It provides an input signal range of -10...+10 V and an output signal range of -10...+10 V. Applied supply voltage is displayed by a green LED.)
|
ABB
|
|
1SVR011710R2100
|
CC-E V/V Signal converter, singlef. 0-10V / 0-10V, 24VDC (The CC-E V/V is a single-function standard analog signal converter from the CC-E range. This converter, with 3-way electrical isolation, operates with a rated control supply voltage of 24 V DC. It provides an input signal range of 0-10 V and an output signal range of 0-10 V. Applied supply voltage is displayed by a green LED.)
|
ABB
|
|
1SVR011720R2300
|
CC-E V/V Signal converter, singlef. 0-10V / 0-10V, 110-240VAC (The CC-E V/V is a single-function standard analog signal converter from the CC-E range. This converter, with 3-way electrical isolation, operates with a rated control supply voltage of 110-240 V AC. It provides an input signal range of 0-10 V and an output signal range of 0-10 V. Applied supply voltage is displayed by a green LED.)
|
ABB
|
|
1SVR040005R0000
|
CC-U/TC Universal signal converter 110-240VAC 50/60Hz / 100-300VDC (The CC-U/TC is an universal signal converter from the CC-U range. This converter, with 3-way electrical isolation, for thermocouples types K, J, T, S, E, N, R, and B, operates with a rated control supply voltage of 110-240 V AC. It provides short-circuit proof signal outputs, pluggable connecting terminals and configurable detection of input signal interruption (low fail safe / high fail safe). The temperature ranges for the 8 different thermocouples, 2 input voltage signal ranges (0-10 mV, 0-50 mV) and 41 output signal ranges (8 standard and 33 non-standard) can be configured by means of directly accessible lateral DIP switches. The gain and the offset adjustment is made via front-face operating elements. Applied supply voltage is displayed by a green LED.)
|
ABB
|
|
1SVR040004R0700
|
CC-U/TC Universal signal converter 24-48VDC / 24VAC 50/60Hz (The CC-U/TC is an universal signal converter from the CC-U range. This converter, with 3-way electrical isolation, for thermocouples types K, J, T, S, E, N, R, and B, operates with a rated control supply voltage of 24 V DC. It provides short-circuit proof signal outputs, pluggable connecting terminals and configurable detection of input signal interruption (low fail safe / high fail safe). The temperature ranges for the 8 different thermocouples, 2 input voltage signal ranges (0-10 mV, 0-50 mV) and 41 output signal ranges (8 standard and 33 non-standard) can be configured by means of directly accessible lateral DIP switches. The gain and the offset adjustment is made via front-face operating elements. Applied supply voltage is displayed by a green LED.)
|
ABB
|
|
1SVR040010R0000
|
CC-U/STDR Universal signal converter 24-48VDC / 24VAC 50/60Hz (The CC-U/STDR is a standard analog signal converter from the CC-U range. This converter, with relay outputs and with 3-way electrical isolation, operates with a rated control supply voltage of 24-48 V DC and provides pluggable connecting terminals. 7 input signal ranges as well as open- or closed-circuit operating principle can be configured by means of directly accessible lateral DIP switches. This converter has 2 threshold relay outputs with one c/o (SPDT) contact each. The threshold values and the respective hysteresis can be adjusted independently from each other with front-face potentiometers. Applied supply voltage is displayed by a green LED and two yellow LEDs display the state of the output relays.)
|
ABB
|
|
1SVR040011R2500
|
CC-U/STDR Universal signal converter 110-240VAC 50/60Hz / 100-300VDC (The CC-U/STDR is a standard analog signal converter from the CC-U range. This converter, with relay outputs and with 3-way electrical isolation, operates with a rated control supply voltage of 110-240 V AC and provides pluggable connecting terminals. 7 input signal ranges as well as open- or closed-circuit operating principle can be configured by means of directly accessible lateral DIP switches. This converter has 2 threshold relay outputs with one c/o (SPDT) contact each. The threshold values and the respective hysteresis can be adjusted independently from each other with front-face potentiometers. Applied supply voltage is displayed by a green LED and two yellow LEDs display the state of the output relays.)
|
ABB
|
|
1SVR040001R0400
|
CC-U/STD Universal signal converter 110-240VAC 50/60Hz / 100-300VDC (The CC-U/STD is a standard analog signal converter from the CC-U range. This converter, with 3-way electrical isolation, operates with a rated control supply voltage of 110-240 V AC. It provides short-circuit proof signal outputs, pluggable connecting terminals and configurable detection of input voltage signal interruption (low fail safe / high fail safe). 28 input signal ranges (16 standard and 12 non-standard) and 41 output signal ranges (8 standard and 33 non-standard) can be configured by means of directly accessible lateral DIP switches. The gain and the offset adjustment is made via front-face operating elements. Applied supply voltage is displayed by a green LED.)
|
ABB
|
|
1SVR040000R1700
|
CC-U/STD Universal signal converter 24-48VDC / 24VAC 50/60Hz (The CC-U/STD is a standard analog signal converter from the CC-U range. This converter, with 3-way electrical isolation, operates with a rated control supply voltage of 24-48 V DC. It provides short-circuit proof signal outputs, pluggable connecting terminals and configurable detection of input voltage signal interruption (low fail safe / high fail safe). 28 input signal ranges (16 standard and 12 non-standard) and 41 output signal ranges (8 standard and 33 non-standard) can be configured by means of directly accessible lateral DIP switches. The gain and the offset adjustment is made via front-face operating elements. Applied supply voltage is displayed by a green LED.)
|
ABB
|
|
1SVR040012R2600
|
CC-U/RTDR Universal signal converter 24-48VDC / 24VAC 50/60Hz (The CC-U/RTDR is a temperature signal converter from the CC-U range. This converter, with relay outputs and with 3-way electrical isolation, for RTD sensors (PT100), operates with a rated control supply voltage of 24-48 V DC and provides pluggable connecting terminals. 5 input temperature ranges as well as open- or closed-circuit operating principle can be configured by means of directly accessible lateral DIP switches. This converter has 2 threshold relay outputs with one c/o (SPDT) contact each. The threshold values and the respective hysteresis can be adjusted independently from each other with front-face potentiometers. Applied supply voltage is displayed by a green LED and two yellow LEDs display the state of the output relays.)
|
ABB
|
|
1SVR040013R2700
|
CC-U/RTDR Universal signal converter 110-240VAC 50/60Hz / 100-300VDC (The CC-U/RTDR is a temperature signal converter from the CC-U range. This converter, with relay outputs and with 3-way electrical isolation, for RTD sensors (PT100), operates with a rated control supply voltage of 110-240 V AC and provides pluggable connecting terminals. 5 input temperature ranges as well as open- or closed-circuit operating principle can be configured by means of directly accessible lateral DIP switches. This converter has 2 threshold relay outputs with one c/o (SPDT) contact each. The threshold values and the respective hysteresis can be adjusted independently from each other with front-face potentiometers. Applied supply voltage is displayed by a green LED and two yellow LEDs display the state of the output relays.)
|
ABB
|
|
1SVR040002R0500
|
CC-U/RTD Universal signal converter 24-48VDC / 24VAC 50/60Hz (The CC-U/RTD is a temperature signal converter from the CC-U range. This converter, with 3-way electrical isolation, for RTD sensors (PT10, PT100, PT1000), operates with a rated control supply voltage of 24 V DC. It provides short-circuit proof signal outputs, pluggable connecting terminals and configurable detection of input signal interruption (low fail safe / high fail safe). The temperature ranges for the 3 different resistance thermometers as well as 41 output signal ranges (8 standard and 33 non-standard) can be configured by means of directly accessible lateral DIP switches. The gain and the offset adjustment is made via front-face operating elements. Applied supply voltage is displayed by a green LED.)
|
ABB
|
|
1SVR040003R0600
|
CC-U/RTD Universal signal converter 110-240VAC 50/60Hz / 100-300VDC (The CC-U/RTD is a temperature signal converter from the CC-U range. This converter, with 3-way electrical isolation, for RTD sensors (PT10, PT100, PT1000), operates with a rated control supply voltage of 110-240 V AC. It provides short-circuit proof signal outputs, pluggable connecting terminals and configurable detection of input signal interruption (low fail safe / high fail safe). The temperature ranges for the 3 different resistance thermometers as well as 41 output signal ranges (8 standard and 33 non-standard) can be configured by means of directly accessible lateral DIP switches. The gain and the offset adjustment is made via front-face operating elements. Applied supply voltage is displayed by a green LED.)
|
ABB
|
|
1SVR040006R0100
|
CC-U/I Universal signal converter 24-48VDC / 24VAC 50/60Hz (The CC-U/I is a measuring converter from the CC-U range. This converter, with 3-way electrical isolation, for current RMS values of any wave form, operates with a rated control supply voltage of 24-48 V DC. It provides short-circuit proof signal outputs and pluggable connecting terminals. Selection of one of 2 input current signal ranges (0-1 A, 0-5 A) is made by the corresponding terminal connection. 41 output signal ranges (8 standard and 33 non-standard) can be configured by means of directly accessible lateral DIP switches. The gain and the offset adjustment is made via front-face operating elements. Applied supply voltage is displayed by a green LED.)
|
ABB
|
|
1SVR040007R0200
|
CC-U/I Universal signal converter 110-240VAC 50/60Hz / 100-300VDC (The CC-U/I is a measuring converter from the CC-U range. This converter, with 3-way electrical isolation, for current RMS values of any wave form, operates with a rated control supply voltage of 110-240 V AC. It provides short-circuit proof signal outputs and pluggable connecting terminals. Selection of one of 2 input current signal ranges (0-1 A, 0-5 A) is made by the corresponding terminal connection. 41 output signal ranges (8 standard and 33 non-standard) can be configured by means of directly accessible lateral DIP switches. The gain and the offset adjustment is made via front-face operating elements. Applied supply voltage is displayed by a green LED.)
|
ABB
|
|
1SVR011795R1300
|
CC-E RTD/I Temp. converter, singlef. PT100 0...300??C / 0-20mA, 110-240VAC (The CC-E RTD/I is a single-function temperature signal converter from the CC-E range. This converter, with 3-way electrical isolation, for RTD sensors (PT100, 2- or 3-wire connection), operates with a rated control supply voltage of 110-240 V AC. It provides an input temperature range of 0òÀæ300 ??C and an output signal range of 0-20 mA. Applied supply voltage is displayed by a green LED.)
|
ABB
|
|
1SVR011734R1500
|
CC-E RTD/I Temp. converter, singlef. PT100 -50...+50??C / 0-20mA, 24VDC (The CC-E RTD/I is a single-function temperature signal converter from the CC-E range. This converter, with 3-way electrical isolation, for RTD sensors (PT100, 2- or 3-wire connection), operates with a rated control supply voltage of 24 V DC. It provides an input temperature range of -50...+50 ??C and an output signal range of 0-20 mA. Applied supply voltage is displayed by a green LED.)
|
ABB
|
|
1SVR011790R2200
|
CC-E RTD/I Temp. converter, singlef. PT100 0-100??C / 4-20mA, 110-240VAC (The CC-E RTD/I is a single-function temperature signal converter from the CC-E range. This converter, with 3-way electrical isolation, for RTD sensors (PT100, 2- or 3-wire connection), operates with a rated control supply voltage of 110-240 V AC. It provides an input temperature range of 0òÀæ100 ??C and an output signal range of 4-20 mA. Applied supply voltage is displayed by a green LED.)
|
ABB
|
|
1SVR010201R0300
|
CC-E I/I-2 Current / current isolator 2 channel, loop-powered (The CC-E I/I-2 is a loop-powered current / current isolator from the CC-E range. This isolator, with 2 independent channels and with 2-way electrical isolation, operates without any external power supply and allows isolation between analog input and output signals of 0-20 mA or 4-20 mA.)
|
ABB
|
|
1SVR010200R1600
|
CC-E I/I-1 Current / current isolator 1 channel, loop-powered (The CC-E I/I-1 is a loop-powered current / current isolator from the CC-E range. This isolator, with 1 channel and with 2-way electrical isolation, operates without any external power supply and allows isolation between analog input and output signals of 0-20 mA or 4-20 mA.)
|
ABB
|
|
1SVR011715R1200
|
CC-E I/I Signal converter, singlef. 0-20mA / 4-20mA, 24VDC (The CC-E I/I is a single-function standard analog signal converter from the CC-E range. This converter, with 3-way electrical isolation, operates with a rated control supply voltage of 24 V DC. It provides an input signal range of 0-20 mA and an output signal range of 4-20 mA. Applied supply voltage is displayed by a green LED.)
|
ABB
|
|
1SVR011713R1000
|
CC-E I/V Signal converter, singlef. 0-20mA / 0-10V, 24VDC (The CC-E I/V is a single-function standard analog signal converter from the CC-E range. This converter, with 3-way electrical isolation, operates with a rated control supply voltage of 24 V DC. It provides an input signal range of 0-20 mA and an output signal range of 0-10 V. Applied supply voltage is displayed by a green LED.)
|
ABB
|
|
1SVR011726R1500
|
CC-E I/V Signal converter, singlef. 4-20mA / 0-10V, 110-240VAC (The CC-E I/V is a single-function standard analog signal converter from the CC-E range. This converter, with 3-way electrical isolation, operates with a rated control supply voltage of 110-240 V AC. It provides an input signal range of 4-20 mA and an output signal range of 0-10 V. Applied supply voltage is displayed by a green LED.)
|
ABB
|
|
1SVR011716R1300
|
CC-E I/V Signal converter, singlef. 4-20mA / 0-10V, 24VDC (The CC-E I/V is a single-function standard analog signal converter from the CC-E range. This converter, with 3-way electrical isolation, operates with a rated control supply voltage of 24 V DC. It provides an input signal range of 4-20 mA and an output signal range of 0-10 V. Applied supply voltage is displayed by a green LED.)
|
ABB
|
|
1SVR011771R2200
|
CC-E IAC/I Current converter, singlef. 0-5A, 0-20A/AC / 0-20mA, 24VDC (The CC-E IAC/I is a single-function current measuring converter from the CC-E range. This converter, with 3-way electrical isolation, for sinusoidal currents, operates with a rated control supply voltage of 24 V DC. It provides 2 input current signal ranges (0-5 A, 0-20 A, AC), selectable by corresponding terminal connection, and an output signal range of 0-20 mA. Applied supply voltage is displayed by a green LED.)
|
ABB
|
|
1SVR011782R0700
|
CC-E IAC/I Current converter, singlef. 0-5A, 0-20A/AC / 4-20mA, 110-240VAC (The CC-E IAC/I is a single-function current measuring converter from the CC-E range. This converter, with 3-way electrical isolation, for sinusoidal currents, operates with a rated control supply voltage of 110-240 V AC. It provides 2 input current signal ranges (0-5 A, 0-20 A, AC), selectable by corresponding terminal connection, and an output signal range of 4-20 mA. Applied supply voltage is displayed by a green LED.)
|
ABB
|
|
1SVR011723R1200
|
CC-E I/V Signal converter, singlef. 0-20mA / 0-10V, 110-240VAC (The CC-E I/V is a single-function standard analog signal converter from the CC-E range. This converter, with 3-way electrical isolation, operates with a rated control supply voltage of 110-240 V AC. It provides an input signal range of 0-20 mA and an output signal range of 0-10 V. Applied supply voltage is displayed by a green LED.)
|
ABB
|
|
1SVR010203R0500
|
CC-E IAC/ILPO Current converter 0-1A, 0-5A / 04-20mA, loop-powered (The CC-E IAC/ILPO is a current measuring converter from the CC-E range. This converter, with 3-way electrical isolation, for sinusoidal currents, operates without any auxiliary power. It provides 2 input current signal ranges (0-1 A, 0-5 A, AC), selectable by a front-face sliding switch, and an output signal range of 4-20 mA. The adjustment of the gain and the offset is made via potentiometers on the front of the unit.)
|
ABB
|
|
1SVR011781R0600
|
CC-E IAC/I Current converter, singlef. 0-5A, 0-20A/AC / 0-20mA, 110-240VAC (The CC-E IAC/I is a single-function current measuring converter from the CC-E range. This converter, with 3-way electrical isolation, for sinusoidal currents, operates with a rated control supply voltage of 110-240 V AC. It provides 2 input current signal ranges (0-5 A, 0-20 A, AC), selectable by corresponding terminal connection, and an output signal range of 0-20 mA. Applied supply voltage is displayed by a green LED.)
|
ABB
|
|
1SVR011772R2300
|
CC-E IAC/I Current converter, singlef. 0-5A, 0-20A/AC / 4-20mA, 24VDC (The CC-E IAC/I is a single-function current measuring converter from the CC-E range. This converter, with 3-way electrical isolation, for sinusoidal currents, operates with a rated control supply voltage of 24 V DC. It provides 2 input current signal ranges (0-5 A, 0-20 A, AC), selectable by corresponding terminal connection, and an output signal range of 4-20 mA. Applied supply voltage is displayed by a green LED.)
|
ABB
|
|
1SVR011774R2500
|
CC-E IDC/I Current converter, singlef. 0-5A, 0-20A/DC / 0-20mA, 24VDC (The CC-E IDC/I is a single-function current measuring converter from the CC-E range. This converter, with 3-way electrical isolation, for DC currents, operates with a rated control supply voltage of 24 V DC. It provides 2 input current signal ranges (0-5 A, 0-20 A, DC), selectable by corresponding terminal connection, and an output signal range of 0-20 mA. Applied supply voltage is displayed by a green LED.)
|
ABB
|
|
1SVR011784R0100
|
CC-E IDC/I Current converter, singlef. 0-5A, 0-20A/DC / 0-20mA, 110-240VAC (The CC-E IDC/I is a single-function current measuring converter from the CC-E range. This converter, with 3-way electrical isolation, for DC currents, operates with a rated control supply voltage of 110-240 V AC. It provides 2 input current signal ranges (0-5 A, 0-20 A, DC), selectable by corresponding terminal connection, and an output signal range of 0-20 mA. Applied supply voltage is displayed by a green LED.)
|
ABB
|
|
1SVR011780R1100
|
CC-E IAC/V Current converter, singlef. 0-5A, 0-20A/AC / 0-10V, 110-240VAC (The CC-E IAC/V is a single-function current measuring converter from the CC-E range. This converter, with 3-way electrical isolation, for sinusoidal currents, operates with a rated control supply voltage of 110-240 V AC. It provides 2 input current signal ranges (0-5 A, 0-20 A, AC), selectable by corresponding terminal connection, and an output signal range of 0-10 V. Applied supply voltage is displayed by a green LED.)
|
ABB
|
|
1SVR011770R0500
|
CC-E IAC/V Current converter, singlef. 0-5A, 0-20A/AC / 0-10V, 24VDC (The CC-E IAC/V is a single-function current measuring converter from the CC-E range. This converter, with 3-way electrical isolation, for sinusoidal currents, operates with a rated control supply voltage of 24 V DC. It provides 2 input current signal ranges (0-5 A, 0-20 A, AC), selectable by corresponding terminal connection, and an output signal range of 0-10 V. Applied supply voltage is displayed by a green LED.)
|
ABB
|
|
1SVR011793R1100
|
CC-E RTD/I Temp. converter, singlef. PT100 -50...+50??C / 4-20mA, 110-240VAC (The CC-E RTD/I is a single-function temperature signal converter from the CC-E range. This converter, with 3-way electrical isolation, for RTD sensors (PT100, 2- or 3-wire connection), operates with a rated control supply voltage of 110-240 V AC. It provides an input temperature range of -50...+50 ??C and an output signal range of 4-20 mA. Applied supply voltage is displayed by a green LED.)
|
ABB
|
|
1SVR011732R1300
|
CC-E RTD/I Temp. converter, singlef. PT100 0-100??C / 4-20mA, 24VDC (The CC-E RTD/I is a single-function temperature signal converter from the CC-E range. This converter, with 3-way electrical isolation, for RTD sensors (PT100, 2- or 3-wire connection), operates with a rated control supply voltage of 24 V DC. It provides an input temperature range of 0òÀæ100 ??C and an output signal range of 4-20 mA. Applied supply voltage is displayed by a green LED.)
|
ABB
|
|
1SVR011783R0000
|
CC-E IDC/V Current converter, singlef. 0-5A, 0-20A/DC / 0-10V, 110-240VAC (The CC-E IDC/V is a single-function current measuring converter from the CC-E range. This converter, with 3-way electrical isolation, for DC currents, operates with a rated control supply voltage of 110-240 V AC. It provides 2 input current signal ranges (0-5 A, 0-20 A, DC), selectable by corresponding terminal connection, and an output signal range of 0-10 V. Applied supply voltage is displayed by a green LED.)
|
ABB
|
|
1SVR011773R2400
|
CC-E IDC/V Current converter, singlef. 0-5A, 0-20A/DC / 0-10V, 24VDC (The CC-E IDC/V is a single-function current measuring converter from the CC-E range. This converter, with 3-way electrical isolation, for DC currents, operates with a rated control supply voltage of 24 V DC. It provides 2 input current signal ranges (0-5 A, 0-20 A, DC), selectable by corresponding terminal connection, and an output signal range of 0-10 V. Applied supply voltage is displayed by a green LED.)
|
ABB
|
|
1SVR011775R2600
|
CC-E IDC/I Current converter, singlef. 0-5A, 0-20A/DC / 4-20mA, 24VDC (The CC-E IDC/I is a single-function current measuring converter from the CC-E range. This converter, with 3-way electrical isolation, for DC currents, operates with a rated control supply voltage of 24 V DC. It provides 2 input current signal ranges (0-5 A, 0-20 A, DC), selectable by corresponding terminal connection, and an output signal range of 4-20 mA. Applied supply voltage is displayed by a green LED.)
|
ABB
|
|
1SVR011785R1100
|
CC-E IDC/I Current converter, singlef. 0-5A, 0-20A/DC / 4-20mA, 110-240VAC (The CC-E IDC/I is a single-function current measuring converter from the CC-E range. This converter, with 3-way electrical isolation, for DC currents, operates with a rated control supply voltage of 110-240 V AC. It provides 2 input current signal ranges (0-5 A, 0-20 A, DC), selectable by corresponding terminal connection, and an output signal range of 4-20 mA. Applied supply voltage is displayed by a green LED.)
|
ABB
|
|
1SVR011752R2700
|
CC-E TC/I Temp. converter, singlef. J 0-600??C / 4-20mA, 24VDC (The CC-E TC/I is a single-function temperature signal converter from the CC-E range. This converter, with 3-way electrical isolation, for thermocouples type J, operates with a rated control supply voltage of 24 V DC. It provides an input signal range of 0òÀæ600 ??C and an output signal range of 4-20 mA. Applied supply voltage is displayed by a green LED.)
|
ABB
|
|
1SVR011762R2100
|
CC-E TC/I Temp. converter, singlef. J 0-600??C / 4-20mA, 110-240VAC (The CC-E TC/I is a single-function temperature signal converter from the CC-E range. This converter, with 3-way electrical isolation, for thermocouples type J, operates with a rated control supply voltage of 110-240 V AC. It provides an input signal range of 0òÀæ600 ??C and an output signal range of 4-20 mA. Applied supply voltage is displayed by a green LED.)
|
ABB
|
|
1SVR011765R2400
|
CC-E TC/I Temp. converter, singlef. K 0-1000??C / 4-20mA, 110-240VAC (The CC-E TC/I is a single-function temperature signal converter from the CC-E range. This converter, with 3-way electrical isolation, for thermocouples type K, operates with a rated control supply voltage of 110-240 V AC. It provides an input signal range of 0òÀæ1000 ??C and an output signal range of 4-20 mA. Applied supply voltage is displayed by a green LED.)
|
ABB
|
|
1SVR011760R0300
|
CC-E TC/V Temp. converter, singlef. J 0-600??C / 0-10V, 110-240VAC (The CC-E TC/V is a single-function temperature signal converter from the CC-E range. This converter, with 3-way electrical isolation, for thermocouples type J, operates with a rated control supply voltage of 110-240 V AC. It provides an input signal range of 0òÀæ600 ??C and an output signal range of 0-10 V. Applied supply voltage is displayed by a green LED.)
|
ABB
|
|
1SVR011763R2200
|
CC-E TC/V Temp. converter, singlef. K 0-1000??C / 0-10V, 110-240VAC (The CC-E TC/V is a single-function temperature signal converter from the CC-E range. This converter, with 3-way electrical isolation, for thermocouples type K, operates with a rated control supply voltage of 110-240 V AC. It provides an input signal range of 0òÀæ1000 ??C and an output signal range of 0-10 V. Applied supply voltage is displayed by a green LED.)
|
ABB
|
|
1SVR011750R0100
|
CC-E TC/VI Temp. converter, singlef. J 0-600??C / 0-10V, 24VDC (The CC-E TC/V is a single-function temperature signal converter from the CC-E range. This converter, with 3-way electrical isolation, for thermocouples type J, operates with a rated control supply voltage of 24 V DC. It provides an input signal range of 0òÀæ600 ??C and an output signal range of 0-10 V. Applied supply voltage is displayed by a green LED.)
|
ABB
|
|
1SVR011798R2600
|
CC-E RTD/I Temp. converter, singlef. PT100 -50...+250??C / 0-20mA, 110-240VAC (The CC-E RTD/I is a single-function temperature signal converter from the CC-E range. This converter, with 3-way electrical isolation, for RTD sensors (PT100, 2- or 3-wire connection), operates with a rated control supply voltage of 110-240 V AC. It provides an input temperature range of -50...+250 ??C and an output signal range of 0-20 mA. Applied supply voltage is displayed by a green LED.)
|
ABB
|
|
1SVR011740R0700
|
CC-E RTD/I Temp. converter, singlef. PT100 -50...+250??C / 0-20mA, 24VDC (The CC-E RTD/I is a single-function temperature signal converter from the CC-E range. This converter, with 3-way electrical isolation, for RTD sensors (PT100, 2- or 3-wire connection), operates with a rated control supply voltage of 24 V DC. It provides an input temperature range of -50...+250 ??C and an output signal range of 0-20 mA. Applied supply voltage is displayed by a green LED.)
|
ABB
|
|
1SVR011799R2700
|
CC-E RTD/I Temp. converter, singlef. PT100 -50...+250??C / 4-20mA 110-240VAC (The CC-E RTD/I is a single-function temperature signal converter from the CC-E range. This converter, with 3-way electrical isolation, for RTD sensors (PT100, 2- or 3-wire connection), operates with a rated control supply voltage of 110-240 V AC. It provides an input temperature range of -50...+250 ??C and an output signal range of 4-20 mA. Applied supply voltage is displayed by a green LED.)
|
ABB
|
|
1SVR011792R1000
|
CC-E RTD/I Temp. converter, singlef. PT100 -50...+50??C / 0-20mA, 110-240VAC (The CC-E RTD/I is a single-function temperature signal converter from the CC-E range. This converter, with 3-way electrical isolation, for RTD sensors (PT100, 2- or 3-wire connection), operates with a rated control supply voltage of 110-240 V AC. It provides an input temperature range of -50...+50 ??C and an output signal range of 0-20 mA. Applied supply voltage is displayed by a green LED.)
|
ABB
|
|
1SVR011735R1600
|
CC-E RTD/I Temp. converter, singlef. PT100 -50...+50??C / 4-20mA, 24VDC (The CC-E RTD/I is a single-function temperature signal converter from the CC-E range. This converter, with 3-way electrical isolation, for RTD sensors (PT100, 2- or 3-wire connection), operates with a rated control supply voltage of 24 V DC. It provides an input temperature range of -50...+50 ??C and an output signal range of 4-20 mA. Applied supply voltage is displayed by a green LED.)
|
ABB
|
|
1SVR011738R2100
|
CC-E RTD/I Temp. converter, singlef. PT100 0...300??C / 4-20mA, 24VDC (The CC-E RTD/I is a single-function temperature signal converter from the CC-E range. This converter, with 3-way electrical isolation, for RTD sensors (PT100, 2- or 3-wire connection), operates with a rated control supply voltage of 24 V DC. It provides an input temperature range of 0òÀæ300 ??C and an output signal range of 4-20 mA. Applied supply voltage is displayed by a green LED.)
|
ABB
|
|
1SVR011797R1500
|
CC-E RTD/V Temp. converter, singlef. PT100 -50...+250??C / 0-10V, 110-240VAC (The CC-E RTD/V is a single-function temperature signal converter from the CC-E range. This converter, with 3-way electrical isolation, for RTD sensors (PT100, 2- or 3-wire connection), operates with a rated control supply voltage of 110-240 V AC. It provides an input temperature range of -50...+250 ??C and an output signal range of 0-10 V. Applied supply voltage is displayed by a green LED.)
|
ABB
|
|
1SVR011796R1400
|
CC-E RTD/I Temp. converter, singlef. PT100 0...300??C / 4-20mA, 110-240VAC (The CC-E RTD/I is a single-function temperature signal converter from the CC-E range. This converter, with 3-way electrical isolation, for RTD sensors (PT100, 2- or 3-wire connection), operates with a rated control supply voltage of 110-240 V AC. It provides an input temperature range of 0òÀæ300 ??C and an output signal range of 4-20 mA. Applied supply voltage is displayed by a green LED.)
|
ABB
|
|
1SVR011731R1200
|
CC-E RTD/I Temp. converter, singlef. PT100 0-100??C / 0-20mA, 24VDC (The CC-E RTD/I is a single-function temperature signal converter from the CC-E range. This converter, with 3-way electrical isolation, for RTD sensors (PT100, 2- or 3-wire connection), operates with a rated control supply voltage of 24 V DC. It provides an input temperature range of 0òÀæ100 ??C and an output signal range of 0-20 mA. Applied supply voltage is displayed by a green LED.)
|
ABB
|
|
1SVR011791R1700
|
CC-E RTD/V Temp. converter, singlef. PT100 -50...+50??C / 0-10V, 110-240VAC (The CC-E RTD/V is a single-function temperature signal converter from the CC-E range. This converter, with 3-way electrical isolation, for RTD sensors (PT100, 2- or 3-wire connection), operates with a rated control supply voltage of 110-240 V AC. It provides an input temperature range of -50...+50 ??C and an output signal range of 0-10 V. Applied supply voltage is displayed by a green LED.)
|
ABB
|
|
1SVR011739R2200
|
CC-E RTD/V Temp. converter, singlef. PT100 -50...+250??C / 0-10V, 24VDC (The CC-E RTD/V is a single-function temperature signal converter from the CC-E range. This converter, with 3-way electrical isolation, for RTD sensors (PT100, 2- or 3-wire connection), operates with a rated control supply voltage of 24 V DC. It provides an input temperature range of -50...+250 ??C and an output signal range of 0-10 V. Applied supply voltage is displayed by a green LED.)
|
ABB
|
|
1SVR011736R1700
|
CC-E RTD/V Temp. converter, singlef. PT100 0...300??C / 0-10V 24VDC (The CC-E RTD/V is a single-function temperature signal converter from the CC-E range. This converter, with 3-way electrical isolation, for RTD sensors (PT100, 2- or 3-wire connection), operates with a rated control supply voltage of 24 V DC. It provides an input temperature range of 0...300 ??C and an output signal range of 0-10 V. Applied supply voltage is displayed by a green LED.)
|
ABB
|
|
1SVR011794R1200
|
CC-E RTD/V Temp. converter, singlef. PT100 0...300??C / 0-10V 110-240VAC (The CC-E RTD/V is a single-function temperature signal converter from the CC-E range. This converter, with 3-way electrical isolation, for RTD sensors (PT100, 2- or 3-wire connection), operates with a rated control supply voltage of 110-240 V AC. It provides an input temperature range of 0...300 ??C and an output signal range of 0-10 V. Applied supply voltage is displayed by a green LED.)
|
ABB
|
|
1SVR011733R1400
|
CC-E RTD/V Temp. converter, singlef. PT100 -50...+50??C / 0-10V, 24VDC (The CC-E RTD/V is a single-function temperature signal converter from the CC-E range. This converter, with 3-way electrical isolation, for RTD sensors (PT100, 2- or 3-wire connection), operates with a rated control supply voltage of 24 V DC. It provides an input temperature range of -50...+50 ??C and an output signal range of 0-10 V. Applied supply voltage is displayed by a green LED.)
|
ABB
|
|
1SVR011730R2500
|
CC-E RTD/V Temp. converter, singlef. PT100 0-100??C / 0-10V 24VDC (The CC-E RTD/V is a single-function temperature signal converter from the CC-E range. This converter, with 3-way electrical isolation, for RTD sensors (PT100, 2- or 3-wire connection), operates with a rated control supply voltage of 24 V DC. It provides an input temperature range of 0...100 ??C and an output signal range of 0-10 V. Applied supply voltage is displayed by a green LED.)
|
ABB
|
|
1SVR011751R2600
|
CC-E TC/II Temp. converter, singlef. J 0-600??C / 0-20mA, 24VDC (The CC-E TC/I is a single-function temperature signal converter from the CC-E range. This converter, with 3-way electrical isolation, for thermocouples type J, operates with a rated control supply voltage of 24 V DC. It provides an input signal range of 0òÀæ600 ??C and an output signal range of 0-20 mA. Applied supply voltage is displayed by a green LED.)
|
ABB
|
|
1SVR011761R2000
|
CC-E TC/I Temp. converter, singlef. ^ 0-600??C / 0-20mA, 110-240VAC (The CC-E TC/I is a single-function temperature signal converter from the CC-E range. This converter, with 3-way electrical isolation, for thermocouples type J, operates with a rated control supply voltage of 110-240 V AC. It provides an input signal range of 0òÀæ600 ??C and an output signal range of 0-20 mA. Applied supply voltage is displayed by a green LED.)
|
ABB
|
|
1SVR011788R2400
|
CC-E RTD/V Temp. converter, singlef. PT100 0-100??C / 0-10V, 110-240VAC (The CC-E RTD/V is a single-function temperature signal converter from the CC-E range. This converter, with 3-way electrical isolation, for RTD sensors (PT100, 2- or 3-wire connection), operates with a rated control supply voltage of 110-240 V AC. It provides an input temperature range of 0...100 ??C and an output signal range of 0-10 V. Applied supply voltage is displayed by a green LED.)
|
ABB
|
Òîâàðû
1 - 95 èç 95
Íà÷àëî | Ïðåä. |
1
|
Ñëåä. | Êîíåö
|
