NMB3-8GM50-E2-V1 - Inductive sensor | NMB3-8GM50-E2-V1 - Quad Industry GmbH
Артикул: NMB3-8GM50-E2-V1
Наименование: Inductive sensor | NMB3-8GM50-E2-V1
Производитель: Pepperl-Fuchs
|
|
- 3 mm flush
- Stainless steel sensing face
- Increased operating distance
Datasheet as PDF in following languages: Technical Data: NMB3-8GM50-E2-V1General specifications | Switching element function | PNP NO | Rated operating distance | 3 mm | Installation | flush | Output polarity | DC | Assured operating distance | 0 ... 2.43 mm | Reduction factor rAl | 0.3 | Reduction factor rCu | 0.2 | Reduction factor r304 | 0.7 | Nominal ratings | Operating voltage | 10 ... 30 V DC | Switching frequency | 0 ... 360 Hz | Hysteresis | 5 ... 15 typ. 10 % | Reverse polarity protection | reverse polarity protected | Short-circuit protection | pulsing | Voltage drop | ≤ 2 V | Operating current | 0 ... 100 mA | Off-state current | 0 ... 10 µA typ. 0.1 µA at 25 В°C | No-load supply current | ≤ 10 mA | Switching state indication | LED, red | Standard conformity | Standards | EN 60947-5-2:2007 IEC 60947-5-2:2007 | Approvals and certificates | UL approval | cULus Listed, General Purpose | CSA approval | cCSAus Listed, General Purpose | CCC approval | CCC approval / marking not required for products rated ≤36 V | Ambient conditions | Ambient temperature | -25 ... 75 В°C (-13 ... 167 В°F) | Mechanical specifications | Connection type | Connector M12 x 1 , 4-pin | Housing material | Stainless steel 1.4305 / AISI 303 | Sensing face | Stainless steel 1.4305 / AISI 303 | Housing diameter | 8 mm | Protection degree | IP67 |
|
Назад в раздел
|