NEN10-12GM50-E3-V1 - Inductive sensor | NEN10-12GM50-E3-V1 - Quad Industry GmbH
Артикул: NEN10-12GM50-E3-V1
Наименование: Inductive sensor | NEN10-12GM50-E3-V1
Производитель: Pepperl-Fuchs
|
|
- Increased operating distance
- 10 mm non-flush
Datasheet as PDF in following languages: Technical Data: NEN10-12GM50-E3-V1General specifications | Switching element function | PNP NC | Rated operating distance | 10 mm | Installation | non-flush | Output polarity | DC | Assured operating distance | 0 ... 8.1 mm | Actuating element | mild steel, e. g. 1.0037, SR235JR (formerly St37-2) 30 mm x 30 mm x 1 mm | Reduction factor rAl | 0.45 | Reduction factor rCu | 0.4 | Reduction factor r304 | 0.75 | Reduction factor rBrass | 0.45 | Nominal ratings | Installation conditions | | | A | in steel 1.0037 (St37): 10 mm | | B | 16 mm | | C | 30 mm | | F | 42 mm | Operating voltage | 10 ... 30 V | Switching frequency | 0 ... 600 Hz | Hysteresis | 0.06 ... 1 mm | Reverse polarity protection | yes | Short-circuit protection | pulsing | Overload resistance | yes | Wire breakage protection | yes | Inductive overvoltage protection | yes | Surge suppression | yes | Ripple | 10 % | Voltage drop | ≤ 2 V | Repeat accuracy | 0.3 mm | Operating current | 0 ... 200 mA , above 70В°C max. 150 mA | Off-state current | ≤ 10 µA | No-load supply current | ≤ 15 mA | Switching state indication | LED, yellow | Functional safety related parameters | MTTFd | 2650 a | Mission Time (TM) | 20 a | Diagnostic Coverage (DC) | 0 % | Approvals and certificates | CCC approval | CCC approval / marking not required for products rated ≤36 V | Ambient conditions | Ambient temperature | -25 ... 85 В°C (-13 ... 185 В°F) | Storage temperature | -40 ... 85 В°C (-40 ... 185 В°F) | Mechanical specifications | Connection type | Connector M12 x 1 , 4-pin | Housing material | brass, nickel-plated | Sensing face | PBT | Housing diameter | 12 mm | Protection degree | IP67 | Mass | 20 g | Tightening torque, fastening screws | max. 10 Nm |
|
Назад в раздел
|