ГлавнаяКаталогPepperl-FuchsIndustrial SensorsProximity SensorsInductive Sensors
 

NCN3-F31-B3-V1-K - Inductive sensor | NCN3-F31-B3-V1-K - Quad Industry GmbH

Артикул: NCN3-F31-B3-V1-K
Наименование: Inductive sensor | NCN3-F31-B3-V1-K
Производитель: Pepperl-Fuchs


  • Direct mounting on standard actuators
  • Mode of operation, programmable
  • Lead breakage and short-circuit monitoring of the valve
  • Protection degree IP67
  • Communication monitoring, turn-off

Datasheet as PDF in following languages:


Technical Data: NCN3-F31-B3-V1-K

Product Description
Valve positioner and valve control module
General specifications
Switching element functionprogrammable
Rated operating distance3 mm
Installationflush mountable
Output polarityAS-Interface
Assured operating distance0 ... 2.43 mm
Reduction factor rAl 0.5
Reduction factor rCu 0.45
Reduction factor r304 1
Reduction factor rSt37 1.2
Slave typeStandard slave
AS-Interface specificationV2.1
Required master specification≥ V2.1
Nominal ratings
Operating voltage26.5 ... 31.9 V via AS-i bus system
Switching frequency0 ... 100 Hz
No-load supply current≤ 35 mA
Functional safety related parameters
MTTFd842 a
Mission Time (TM)20 a
Diagnostic Coverage (DC)0 %
Indicators/operating means
LED INswitching state (input); LED yellow
LED OUTbinary LED yellow/red
yellow: switching state
red: lead breakage/short-circuit
Compliance with standards and directives
Standard conformity
Electromagnetic compatibilityEN 50295:1999-10
Approvals and certificates
UL approvalcULus Listed, General Purpose
CSA approvalcCSAus Listed, General Purpose
CCC approvalCCC approval / marking not required for products rated ≤36 V
Ambient conditions
Ambient temperature-25 ... 70 В°C (-13 ... 158 В°F)
Mechanical specifications
Connection (system side)connector M12 x 1, 4-pin
Connection (valve side)0.5 m, PVC cable
Core cross-section (valve side)0.75 mm2
Protection degreeIP67
Material
HousingPBT
Notevalve voltage limited to 26,4 V max.; valve power 2,5 W max.

Назад в раздел