MS7505W2030/U - Honeywell floating, 44 lb-in., 5 Nm spring return, direct-coupled actuator - Quad Industry GmbH
Àðòèêóë: MS7505W2030/U
Íàèìåíîâàíèå: Honeywell floating, 44 lb-in., 5 Nm spring return, direct-coupled actuator
Ïðîèçâîäèòåëü: Honeywell
|
|
Product Specifications - Application
- HVAC
- Dimensions (in.)
- 6 81/54 high x 3 55/84 wide x 3 5/32 deep
- Dimensions (mm)
- 177 mm high x 98 mm wide x 80 deep
- Includes
- Mounting bracket, self-centering shaft adapter
- Weight (lb)
- 3.5 lb
- Weight (kg)
- 1.6 kg
- Materials
- Plenum rated plastic housing
- Comments
- Integral 1/2 in. NPSM conduit connection.
- Mounting
- Direct Coupled
- Frequency
- 50 Hz, 60 Hz
- Approvals, Underwriters Laboratories Inc.
- UL 873
- Electrical Connections
- 18 AWG color-coded cable
- Operating Humidity Range (% RH)
- 5 to 95% RH, non-condensing
- Supply Voltage
- 24 Vac or Vdc
- Power Consumption
- Driving-- 8 VA
- Shipping and Storage Temperature Range (F)
- .-40 F to +150F
- Shipping and Storage Temperature Range (C)
- .-40 C to +65 C
- Approvals, CE
- EMC 2004/108/EC, Certification Low Voltage Directive 2006/95/EC, IEC 60730-1 and Part 2-14
- Approvals, Canadian Underwriters Laboratories Inc.
- cUL C22.2 No. 24-93
- Ambient Temperature Range (F)
- .-40 F to +149F
- Ambient Temperature Range (C)
- .-40 C to +65 C
- Approvals, C-Tick
- N314
- Environmental, Electrical or Ingress Protection Rating
- NEMA 2, IP54
- Internal Auxiliary Switch
- 0
- Maximum Noise Rating
- Driving (dB(A) @ 1m)-- 40, Holding (dB(A) @ 1m)-- 20 (no audible noise)
- Stroke
- 95 ?3 degrees
- Shaft Dimensions (in.)
- 3/8 to 5/8 in. round or 1/4 to 1/2 in. square
- Actuator Type
- Damper, Valve
- Control Signal
- Floating, (0)2-10 Vdc (4-20 mA w/500 ohm resistor), On/Off, SPDT
- Fail Safe Mode
- Spring Return
- Torque Rating (lb-in.)
- 44 lb-in.
- Torque Rating (Nm)
- 5 Nm
- Spring Return Torque/Force (lb-in., lbf)
- 44 lb-in.
- Spring Return Torque/Force (Nm, N)
- 5 Nm
- Additional Torque Ratings (lb-in.)
- Maximum Stall-- 105 lb-in.
- Additional Torque Ratings (Nm)
- Maximum Stall-- 12 Nm
- External Auxiliary Switches Available
- No
- Rotation to Open
- By switch
- Rotational Stroke Adjustment
- Mechanically limited 5 degree increments
- Cable
- Threaded conduit connector
- Timing, Nominal
- Driving @ 60 Hz-- 90 sec
- Spring Return Timing
- Maximum-- 25 sec
- Feedback
- (0)2-10 Vdc
- Shaft Adapter Type
- Self-centering clamping
- Manual operation
- N/A
- Shaft Dimensions (mm)
- 9 to 16 mm round or 6 to 13 mm square
- Spring Return Direction
- By orientation
- Input Impedance
- Min. 95 kOhm
- Electrical Connections (in.)
- 36 in.
- Electrical Connections (mm)
- 0.9 m
Marketing Collateral Product Selections/Comparisons-Competitive Direct Coupled Actuator (DCA) Cross-Reference Wiring-MS7110 Wiring Diagram Wiring-MS7110 actuator wiring Wiring-Wiring for 0/2-10 Vdc proportioning controller operating multiple actuators Wiring-SPDT end switch operation Wiring-low-voltage two-position control for Direct Coupled actuator Wiring-S05010 S10010 S20010 Actuator wiring Wiring-Wiring for high side (triac source) floating control Wiring-Wiring for low side (triac sink) floating control Wiring-Wiring for low side (triac sink) floating control using separate transformers Wiring-Wiring for 4-20 mA proportioning controller operating multiple actuators Wiring-Wiring 0/2-10 Vdc proportioning controller operating multiple actuators Wiring-2position direct coupled acturator wiring diagram Wiring-Wiring for SPST on/off control Wiring-S03 S05 actuator Wiring for 3 kOhm Economizer controllers Wiring-S03 S05 actuators Wiring for 3 position Economizer controllers Wiring-S03 S05 Actuator wiring for SPDT on/off control Wiring-S03 S05 Actuators wiring for floating control Wiring-S03 S05 Actuators wiring for 2-10 vdc proportioning controllers Wiring-S03 S05 Actuators Wiring for 4-20 mA proportioning controllers Wiring-S03 S05 actuator Wiring for 2-10 Vdc proportioning controller operating multiple Wiring-S03 S05 actuators Override to full open Wiring-Terminal block details Wiring-Wiring for SPDT on/off control Wiring-Wiring for floating control Wiring-Wiring for (0)2-10 Vdc proportioning controllers Wiring-Wiring for 4-20 mA proportioning controllers Wiring-Wiring for (0)2-10 Vdc proportioning controller operating multiple actuators Wiring-MS7510W2008/2206, MS7520W2007/2205 Floating Modulating Wiring-MS8110W1008/1206, MS81200W1007/1205 Two Position Low Wiring-Wiring switch only actuator models Wiring-Switch only models Wiring-Wiring for low-voltage two-position control Wiring-Wiring for line-voltage two-position control Dimension-Dimensions Dimension-Series S03, Series S05 Direct Coupled Actuator Dimension-3 Nm, 5 Nm Series Spring Return Direct Coupled Actuators dimensions Dimension-Spring Return Direct Coupled Actuators, 44 lb-in, 88 lb-in and 175 lb-in Technical Documents Installation Materials-Foot-Mounted Bracket for Direct Coupled Actuators (DCA) Installation Materials-Crankarm Kit for Direct Coupled Actuators (DCA) Installation Materials-Tandem Mounting Kit for Direct Coupled Actuators (DCA) Product Data and Specifications-Spring Return Direct Coupled Actuators (DCA), 88 lb-in (10 Nm) and 175 lb-in (20 Nm) Installation Materials-Zelix Spring Return Direct Coupled Actuators (DCA), 27 lb-in (3 Nm) and 44 lb-in (5 Nm) Product Data and Specifications-Zelix Spring Return Direct Coupled Actuators (DCA), 27 lb-in (3 Nm) and 44 lb-in (5 Nm) Installation Materials-Direct Coupled Actuator (DCA) Wiring Product Data and Specifications-Accessories for Direct Coupled Actuators (DCA) Product Data and Specifications-Spring Return Direct Coupled Actuators (DCA), 44 lb-in (5 Nm) | | | | |
|
Íàçàä â ðàçäåë
|
