ÃëàâíàÿÊàòàëîãjungRS8RS8RRS8REG
 

RS8REGHE - Relay station universal, 8-gang Rail mounting device, 8 rail units with manual electronic operation and LED status indication 8 make contacts - Quad Industry GmbH

Àðòèêóë: RS8REGHE
Íàèìåíîâàíèå: Relay station universal, 8-gang Rail mounting device, 8 rail units with manual electronic operation and LED status indication 8 make contacts
Ïðîèçâîäèòåëü: JUNG




Relay station universal, 8-gang
Rail mounting device, 8 rail units
with manual electronic operation and LED status indication
8 make contacts

Intended use
*     Switching of lighting
*     Switching of single-phase fan motors
*     Switching of electrically-driven blinds, shutters, awnings and similar hangings
*     Mounting on DIN rail in distribution boxes
*     Operation by means of sensor modules, push-button modules, or unlit installation buttons


Product characteristics
*     Local control. The relay station can be controlled using the keypad when the control units are not connected.
*     Activation of status LEDs on the control units. The relay station has the activation outputs A1’...A8’ for this purpose.
*     Switch operation
*     Push-button operation
*     Blind operation with slat adjustment
*     Mixed operation of switching, push-button and blind control is possible.
*     Central switching function All On, All Off
*     Parallel switching of two relay stations possible



Technical data
Rated voltage: AC 230/240 V ~, 50/60 Hz
Power loss: 12.5 W
Stand-by power: 0.5 W
Length of control cable: max. 100 m
Number of control units
Sensor module (ref.-no. SM 1608): max. 4 (also when relay/dimming stations are connected in parallel)
Push-button module 24 V AC/DC (make contact): depending on push-button module, consider current consumption
Push-button module (ref.-no. 4008 TSM): max. 4 (also when relay/dimming stations are connected in parallel)
Control units
Voltage: DC 24 V SELV
Current carrying capacity: ? 80 mA
Switching inputs E1 ... E8
Resistance Ri: 200 k?
Control voltage: DC 24 V SELV
Activation outputs A1 ... A8
Resistance Ra: 330 ?
Control voltage: DC 24 V SELV
Current carrying capacity: 10 mA
Connection, mains and load outputsscrew terminals
single wire: 1.5 ... 4 mm2
stranded without ferrule: 0.75 ... 4 mm2
stranded with ferrule: 0.5 ... 2.5 mm2
Connection of switching inputs, activation outputs and control units: screw terminals
single wire: 1.5 mm2
stranded without ferrule: 1 mm2
stranded with ferrule: 0.75 mm2
Load outputs A1 ... A8
Contact type: floating make contact (µ contact)
Breaking capacity per load output: AC 250 V ~ / 16 AX
Switching current, load outputs: ? 80 A
Switching current neighbouring load outputs: ? 20 A
Loads per output
Ohmic load: 3000 W
Capacitive load: 16 A / max. 140 µF
blind / fan motors: 1380 VA
Switch-on current: max. 800 A (200 µs)
max. 165 A (20 ms)
Lamp loads
Incandescent lamps: 3000 W
HV halogen lamps: 2500 W
Electronic transformers with LV halogen lamps: 1500 W
Inductive transformers with LV halogen lamps: 1200 W
Fluorescent lamps:
– non-compensated: 1000 W
– parallel compensated: 1160 W / 140 µF
– lead-lag circuit: 2300 W / 140 µF
Electronic ballast: depending on type
Minimum load: AC 12 V, 100 mA
Ambient temperature: ?5 ... +45 °C
Storing temperature: ?25 ... +70 °C
Mounting width: 144 mm (8 rail units)
Change-over time for direction change: 1 sec
Switch-on time, blinds operation: 2 min

Manufacturer: JUNG
Ref.-no.: RS 8 REGHE

Íàçàä â ðàçäåë