ÃëàâíàÿÊàòàëîãjungRA2RA23RA230
 

RA23024REGHE - KNX Devices Room actuator 110-230 V Rail mounting device, 4 rail units with manual electronic operation and LED status indication Only with the ETS 3.0d version or later versions the full functionality will be available. ETS product family: Output Product type: Binary output - Quad Industry GmbH

Àðòèêóë: RA23024REGHE
Íàèìåíîâàíèå: KNX Devices Room actuator 110-230 V Rail mounting device, 4 rail units with manual electronic operation and LED status indication Only with the ETS 3.0d version or later versions the full functionality will be available. ETS product family: Output Product type: Binary output
Ïðîèçâîäèòåëü: JUNG




KNX Devices

Room actuator 110-230 V
Rail mounting device, 4 rail units
with manual electronic operation and LED status indication
Only with the ETS 3.0d version or later versions the full functionality will be available.
ETS product family: Output
Product type: Binary output

Intended use
*     Switching of electrical consumers AC 110-230 V with floating contacts
*     Switching of electrically operated blinds, shutters, awnings and similar curtains
*     Heating outputs: electronic outputs for switching electro-thermal valve drives


Product characteristics
*     Manual output control, provisional operation
*     Feedback in manual control mode and in bus operation
*     Scene function
*     Disabling of individual outputs by hand or via the bus


Switching function
*     Make-contact and break-contact operation
*     Logic operation and forcing function
*     Feedback function
*     Central switching function with group feedback
*     Time functions: ON-delay, OFF-delay, staircase lighting timer with early-warning function


Blind/shutter function
*     Suitable for AC motors 110-230 V
*     Direct control of blind/shutter position
*     Direct control of slat position
*     Checkback of running state, blind/shutter position and slat position
*     Forced-control position from primary control
*     Safety function: 3 independent wind alarms, rain alarm, frost alarm
*     Sun protection function


Control of valve drives 230 V
*     Switching or PWM operation
*     Control of valve drives with working characteristics "normally open" or "normally closed“
*     Overload and short-circuit protection
*     Emergency operation in the event of bus failure for summer and winter
*     Protection against jamming valves
*     Forced-control position



Technical data
KNX supply: DC 21 ... 32 V SELV
Power consumption KNX: max. 150 mW
Power supply mains: AC 110 ... 230 V ~, 50/60 Hz
Power loss: max. 6 W
Ambient temperature: ?5 ... +45 °C
Storing temperature: ?25 ... +70 °C
Mounting width: 72 mm (4 rail units)
Connection, KNX: bus connection block
Connection, mains and outputs: screw terminals
single wire: 0.5 ... 4 mm2
stranded without ferrule: 0.5 ... 4 mm2
stranded with ferrule: 0.5 ... 2.5 mm2
Heating outputs
Number: 2
Contact type: semiconductor, ?
Switching voltage: AC 230/240 V ~
Switching current: 5 ... 50 mA
Switch-on current: max. 1.5 A (2 s)
Number of drives per output: max. 4
Relay outputs
Number: 4 (2 channels for operating blinds)
Contact type: floating make contact (µ contact)
Switching voltage: AC 230/240 V ~
Breaking capacity AC1: 16 A
Breaking capacity AC3: 6 A
Breaking capacity fluorescent lamps: 16 AX
Switching capacities per output
Ohmic load: 3000 W
Capacitive load: 16 A / max. 140 µF
Motors: 1380 VA
Lamp loads:
Incandescent lamps: 3000 W
HV halogen lamps: 2500 W
Electronic transformers with LV halogen lamps: 1500 W
Inductive transformers with LV halogen lamps: 1200 VA
Fluorescent lamps:
– non-compensated: 1000 W
– parallel compensated: 1160 W / max. 140 µF
– lead-lag circuit: 2300 W / max. 140 µF
Approvals: VDE

Manufacturer: JUNG
Ref.-no.: RA 23024 REGHE

Íàçàä â ðàçäåë