AS5232S - AS range
Centre plate with anti lock-out function and sensor connection
Duroplastic (scratch-proof) glossy
for motor control inserts ref.-no.: 230 ME, 232 ME and 224 ME
for sensors ref.-no.: 32 SD and LA 90
for extension flex ref.-no.: 32 K - Quad Industry GmbH
Артикул: AS5232S
Наименование: AS range
Centre plate with anti lock-out function and sensor connection
Duroplastic (scratch-proof) glossy
for motor control inserts ref.-no.: 230 ME, 232 ME and 224 ME
for sensors ref.-no.: 32 SD and LA 90
for extension flex ref.-no.: 32 K
Производитель: JUNG
|
|
AS range
Centre plate with anti lock-out function and sensor connection
Duroplastic (scratch-proof) glossy
for motor control inserts ref.-no.: 230 ME, 232 ME and 224 ME
for sensors ref.-no.: 32 SD and LA 90
for extension flex ref.-no.: 32 K
The centre plate with activated “anti lock-out function” assures, that nobody can be shut out by automatic blinds (e.g. wind, alarm, brightness sensor, timer). A blind/shutter position can be set. The blind/shutter will stop at the desired position.
Function
* Short touch: UPPER or LOWER touch area for adjusting the slats, blind/shutter will be moved for the period the push-button is held, stopping the continuous moving
* Longer touch: LOWER touch area for continuous move downwards
* Longer touch (> 4 sec.): FULL touch area for activating the storing mode, UPPER touch area for activating the “anti lock-out function” (illuminated LED)
* Short touch: UPPER touch area for deactivating the “anti lock-out function". After mains failures the anti lock-out function is also deactivated.
Sun protection: A sunlight sensor permits automatic lowering of the blind/shutter dependent on sunshine.
The potentiometer on the reverse side of the centre plate enables the setting of the brightness value between approx. 5 000 and approx. 80 000 lux. Factory setting: 15 000 lux
dimensions: 55 x 55 mm
Material: duroplastic
Colour: ivory
Manufacturer: JUNG
Ref.-no.: AS 5232 S
|
Назад в раздел
|