| ET 200PRO ASM 400V DISCONNECT MODULE 400V TO 25A FOR SAFE DISCONNECTION UP TO CAT. 3/4 HAN Q4/2 |
|
General technical data: |
product brand name | | SIRIUS |
product designation | | ET 200pro motor starters |
Design of the product | | safety disconnecting module |
Product function | | |
| | Yes |
| | No |
| | No |
Product component / outlet for enine brake | | No |
Type of assignement | | 1 |
Product equipment | | |
- brake control with 400 V AC
| | No |
- brake control with 230 V AC
| | No |
- brake control with 24 V DC
| | No |
- brake control with 180 V DC
| | No |
- brake control with 500 V DC
| | No |
Impulse voltage resistance / rated value | kV | 6 |
Maximum permissible voltage for safe disconnection / between main circuit and auxiliary circuit | V | 400 |
Item designation | | |
- according to DIN EN 61346-2
| | Q |
- according to DIN 40719 extendable after IEC 204-2 / according to IEC 750
| | A |
Type of mounting | | screw fixing |
Depth | mm | 150 |
Height | mm | 230 |
Width | mm | 110 |
|
Main circuit: |
Operating voltage | | |
| V | 400… 500 |
Adjustable response current | | |
- of the current-dependent overload release
| A | 25… 25 |
Operating current / at AC-3 / at 400 V / rated value | A | 25 |
Number of poles / for main current circuit | | 3 |
|
Control circuit: |
Type of voltage / of the controlled supply voltage | | DC |
Control supply voltage / 1 / for DC | V | 24 |
Control supply voltage / 1 / for DC / rated value | | |
| V | 20.4 |
| V | 28.8 |
|
Supply voltage: | | |
Type of voltage / of supply voltage | | DC |
Supply voltage / 1 / for DC | V | 24 |
Supply voltage / 1 / for DC / rated value | | |
| V | 20.4 |
| V | 28.8 |
|
Ambient conditions: |
Protection class IP | | IP65 |
Ambient temperature | | |
| °C | -25… +55 |
| °C | -40… +70 |
| °C | -40… +70 |
Relative humidity | | |
| % | 5… 95 |
Resistance against vibration | | 2g |
Resistance against shock | | 15g / 11 ms |
Degree of pollution | | 3 |
Installation altitude / at a height over sea level / maximum | m | 3,500 |
Built in orientation | | any |
|
Communication: | | |
Protocol / will be supported | | |
| | Yes |
| | Yes |
| | No |
Design of the interface / PROFINET protocol | | Yes |
Design of the electrical connection / of the communication interface | | via backplane bus |
|
Connections: | | |
Number of digital inputs | | 0 |
Number of sockets | | |
- for digital input signals
| | 0 |
- for digital output signals
| | 0 |
Product function | | |
- digital inputs parameterizable
| | No |
- digital outputs parameterizable
| | No |
Design of the electrical connection | | |
- 1 / for digital input signals
| | M12 socket |
- 2 / for digital input signals
| | M12 socket |
- 3 / for digital input signals
| | M12 socket |
- 4 / for digital input signals
| | M12 socket |
- at the manufacturer-specific device interface
| | optical interface |
| | socket according to ISO23570 |
| | socket according to ISO23570 |
- for main energy transmission
| | socket according to ISO23570 |
- for supply voltage infeed
| | via backplane bus |
- for supply voltage transmission
| | via backplane bus |
| | tab terminals |
Verification of suitability | | CE / UL / CSA / CCC |
Protection against electrical shock | | finger-safe |
|
Certificates/approvals: | | |
General Product Approval | Declaration of Conformity | Test Certificates | | |
| |
|
last change: | Mar 27, 2012 |