ÃëàâíàÿÊàòàëîãÊàòàëîã Abb2TL2TLA2TLA0
 

2TLA0

Àðòèêóë Íàèìåíîâàíèå Ïðîèçâîäèòåëü
2TLA042024R1100 JSM D22A Gas spring including fixture, stroke length 350 mm (Gas spring including fittings, stroke length 350mm, Specify the required force when ordering.) ABB
2TLA042023R1000 JSM D27 Handle and screws for JSM D21 ABB
2TLA042023R0500 JSM D21B Mount. kit Magne on conv. door (Mounting kit for Magne. For conventional door (5–15 mm door gap). Fits all Magne. Note: when used with Magne with integrated Adam, a mounting kit is also required for Eva (JSM D24).) ABB
2TLA042023R0300 JSM D24 Mounting kit Eva with Magne (Mounting kit for Eva on conventional door when used with Magne with integrated Adam.) ABB
2TLA042023R0200 JSM D23 Mount. kit Magne on sliding door (Mounting kit for Magne on sliding door. Fits all Magne.) ABB
2TLA042020R3700 JSM D26 Sliding element (Guide sliding element in black Robalon.) ABB
2TLA040033R4800 JSM D1C Hinge Plastic (Hinge C/C 45mm in fiberglass-reinforced Polymide, pre-assembled. Used for conventional doors/hatches. Can also be used as angled bracket) ABB
2TLA040033R0100 JSM D2 Handle with screws (Door handle in Thermoplastic, color is black, Dimensions 26x44x150mm.) ABB
2TLA020302R1000 JSM D20 Slide lock for Eden (Sliding lock for Eden on conventional doors. Made in steel, yellow. Eden is not included.) ABB
2TLA020070R8650 CAN-Bus cable, halogen free, 500 meter (CAN-bus cable 2x0.75 mm2, yellow. UL & CSA approved. Halogen free. 500 meter drum.) ABB
2TLA020070R8610 CAN-Bus cable, halogen free, 100 meter (CAN-bus cable 2x0.75 mm2, yellow. UL & CSA approved. Halogen free. 100 meter ring.) ABB
2TLA020070R8605 CAN-Bus cable, halogen free, 50 meter (CAN-bus cable 2x0.75 mm2, yellow. UL & CSA approved. Halogen free. 50 meter ring.) ABB
2TLA020070R8600 CAN-bus cable 2x0.75mm2, halogen free (CAN-bus cable 2x0.75mm2, yellow. UL & CSA approved. Halogen free. Sold by meter, specify length.) ABB
2TLA020070R6850 CAN-Bus cable 2*0.75mm2, 500 meter (CAN-Bus cable 2x0.75mm2, yellow. UL & CSA approved. 500 meter drum.) ABB
2TLA020070R6810 CAN-Bus cable2*0.75mm2, 100 meter (CAN-Bus cable 2x0.75mm2, yellow. UL & CSA approved. 100 meter ring.) ABB
2TLA020070R6805 CAN-Bus cable 2*0.75 mm2, 50 meter (CAN-Bus cable 2x0.75 mm2, yellow. UL & CSA approved. 50 meter ring.) ABB
2TLA020070R6800 CAN-Bus cable 2x0.75mm2 (CAN-Bus cable 2x0.75 mm2, yellow. UL & CSA approved. Sold by meter, specify length.) ABB
2TLA050210R2520 80m Wire Only (Plastic coated Wire 80m.) ABB
2TLA050210R0630 80M Wire Kit, Galvanized (80m Galvanized wire pull kit. Includes 80m Wire, 30 pcs Eyebolts, 2 pcs Tensioner, 1 pcs Allen Key.) ABB
2TLA050210R0330 20M Wire Kit, Galvanized (20m Galvanized wire pull kit. Includes 20m Wire (One end is terminated with thimble and permanent clamp), 9 pcs Eyebolts, 1 pcs Tensioner, 1 pcs Allen Key.) ABB
2TLA076900R3300 Safety Mat extension cable 5m (5 meter cable with straight M8 female + male connector) ABB
2TLA076900R3200 Safety Mat extension cable 2.5m (2.5 meter cable with straight M8 female + male connector) ABB
2TLA076300R0500 RS 14, Ramp rail (Edge trimmed profile to eliminate vertical edges on the safety mat. Mainly for ASK-1U4 model.) ABB
2TLA020053R5000 SBIT Safety bit for safety screws (Safety screwdriver bit for safety screws.) ABB
2TLA050210R4030 Wire Tensioner, Galvanized (Wire Tensioner/Gripper for Emergency Pull Wire Switch systems, Galvanized.) ABB
2TLA050210R4020 Wire Tensioner, Stainless Steel (Wire Tensioner/Gripper for Emergency Pull Wire Switch systems, Stainless Steel.) ABB
2TLA042103R0600 TLV-28 Compact rail ABB
2TLA040106R0700 JSM E15-N14X8 Express 1400/1500 1pcs 44x88 + mesh (Quick-Guard E section with one 44x88mm profile and welded mesh 1474x1216mm. Total height 1400mm, width 1500mm c-c profiles.) ABB
2TLA040040R1600 JSM YN40W9 Welded mesh black 40x40x3,5mm cut to size, m2 (welded steelmesh 40x40x3,5mm powder coated in black, cut to size, max dimension 2020x1474mm) ABB
2TLA040039R1100 JSM YPC5A2 Pc sheet 5mm uncoloured 2020x1174 ABB
2TLA040038R0600 JSM G2 Cellular rubber self-ad (Cellular rubber 20x25 mm self-adhesive.) ABB
2TLA040035R0700 JSM M4B Special T-nut M4 ABB
2TLA040033R6000 JSM D29A Fitting MKey5 conventional door (Fitting in stainless steel for mounting Mkey5 on a Quick-Guard conventional door.) ABB
2TLA040033R1800 JSM D4E Fitting for Sense7/JSNY7 (Fitting for Sense7/JSNY7 in Aluminium, conventional door. Need two pieces for one door.) ABB
2TLA040033R1300 JSM D9A-K Guide roller, 75/79 with bracket (Fixed support wheel, including angled bracket. Wheel diameter 75mm, height 95mm. Maximal load 70kg) ABB
2TLA020003R3500 HK40S4 4m spiral cable with Cannon conn. (Spiral cable 4m and 12 leads with Cannon female connector.) ABB
2TLA010029R0000 RT9 24DC Safety relay (A universal safety relay for many safety applications. Relay outputs 2NO) ABB
2TLA010015R4000 JSR1T 2s 24DC Expansion relay (Safety expansion relay - for expanding the outputs of safety relays. Time delay 2 sec. Relay outputs 4NO/1NC) ABB
2TLA076300R0000 Safety mat base price, custom made, without molded ramp rail, Aluminum or Steel surface (Custom made special safety mats. (Special shape, material, 2-zones, different colours) Price on request.) ABB
2TLA050211R0006 Screwdriver, Torx T20 (Screwdriver, Anti-Tamper, Torx T20) ABB
2TLA050211R0004 Spring, 220mm, Stainless Steel (Spring for Emergency Pull Wire Switch systems, 220mm, Stainless Steel. When using one Emergency pull wire switch the wire should be anchored at the other end using this Spring.) ABB
2TLA050056R6120 Sense7Z, SS 10m cable, 2NC/1NO, LED (Safety Magnetic Switch, 2NC/1NO, Stainless steel, LED, 10m cable.) ABB
2TLA050056R5100 Sense7, 5m cable, 2NC/1NO, LED (Safety Magnetic Switch, 2NC/1NO, Plastic, LED, 5m cable.) ABB
2TLA050056R4100 Sense7, 2m cable, 2NC/1NO, LED (Safety Magnetic Switch, 2NC/1NO, Plastic, LED, 2m cable.) ABB
2TLA050056R2120 Sense7Z, SS, QC, 2NC/1NO, LED (Safety Magnetic Switch, 2NC/1NO, Stainless steel, LED, 250mm cable with M12 contact.) ABB
2TLA050056R2100 Sense7, QC, 2NC/1NO, LED (Safety Magnetic Switch, 2NC/1NO, Plastic, LED, 250mm cable with M12 contact.) ABB
2TLA050040R0212 Sense7Z, SS Spare Actuator (Spare Actuator to Safety Magnetic Switch Sense7Z, Stainless steel) ABB
2TLA050040R0211 Sense7, Spare Actuator (Spare Actuator to Safety Magnetic Switch Sense7, Plastic) ABB
2TLA041810R0300 Sign ABB Saf. Prod. 220x40x1,5mm pre-ass (Sign ABB Safety products, size 220x40x1,5mm preassembled with screws and nuts.) ABB
2TLA030057R0100 Smile 41 EWWWP (Push button box according to Smile design with 4 buttons, one of which is an emergency stop. The box is adapted for connection to Pluto IQ using lightbutton function. Connection via a M12 8-pin male connector.) ABB
2TLA030057R0000 Smile 41 WWWWP (Push button box according to Smile design with 4 buttons. The box is adapted for connection to Pluto IQ using lightbutton function. Connection via a M12 8-pin male connector.) ABB
2TLA030056R0200 Smile 41 EKWWA AS-i (Push button box according to Smile design with 4 buttons, one of which is an emergency stop and another a safe key switch. The box is adapted for AS-i system. The buttons have programable status LED in button. Connection via a M12 5-pin male connector.) ABB
2TLA030056R0100 Smile 41 EWWWA AS-i (Push button box according to Smile design with 4 buttons, one of which is an emergency stop. The box is adapted for AS-i system. The buttons have programable status LED in button. Connection via a M12 5-pin male connector.) ABB
2TLA030056R0000 Smile 41 WWWWN AS-i (Push button box according to Smile design with 4 buttons. The box is adapted for AS-i system. The buttons have programable status LED in button. Connection via a M12 5-pin male connector.) ABB
2TLA030054R1100 Smile side shields (Protection shield for smile 1-button push box. Transparent plastic.) ABB
2TLA030054R0400 Yellow surround for Inca (Elevated yellow surround for panel mounted emergency stop button.) ABB
2TLA030053R2700 Smile 12 RG M12-8 Reset button (Reset button in Smile enclosure for local reset of Adam Reset M12-8. Blue LED, M12-8 male + female connectors.) ABB
2TLA030053R2600 Smile 12 RF M12-5 Reset button (Reset button in Smile enclosure for local reset of Adam Reset M12-5. Blue LED, M12-5 male + female connectors.) ABB
2TLA030053R0100 Smile 11 RB Reset button Pluto with M12 male (Reset button in Smile enclosure, Pluto Lightbutton connection, 1 button+Blue LED, 1 x M12 5-pin male connector.) ABB
2TLA030053R0000 Smile 11 RA Reset button 1xNO with M12 male (Reset button in Smile enclosure, 1 x NO button, 1 x Blue LED, 1 x M12 5-pin male connector.) ABB
2TLA030052R0200 Smile 11 EAR AS-i (Emergency stop in Smile enclosure, adapted for AS-i system, programable status LED in button, 1 x M12 5-pin male connector, reversed button attachement(from bottom).) ABB
2TLA030052R0100 Smile 11 SA AS-i (Machine stop(Black button) in Smile enclosure, adapted for AS-i system, programable status LED in button, 1 x M12 5-pin male connector) ABB
2TLA030052R0000 Smile 11 EA AS-i (Emergency stop in Smile enclosure, adapted for AS-i system, programable status LED in button, 1 x M12 5-pin male connector) ABB
2TLA030051R1000 Smile 12 SA (Machine stop(Black button) in Smile enclosure, 2 x NC, Status LED in button, 1 x M12 5-pin male connector and 1 x M12 5-pin female connector.) ABB
2TLA030051R0900 Smile 11 SA (Machine stop(Black button) in Smile enclosure, 2 x NC, Status LED in button, 1 x M12 5-pin male connector.) ABB
2TLA030051R0600 Smile 10 EK (Emergency stop in Smile enclosure, 2 x NC, 1 meter 4-pole cable out of bottom.) ABB
2TLA030051R0400 Smile 10 EA (Emergency stop in Smile enclosure, 2 x NC, Status LED in button, 1 meter 5-pole cable out of bottom.) ABB
2TLA030051R0200 Smile 12 EA (Emergency stop in Smile enclosure, 2 x NC, Status LED in button, 1 x M12 5-pin male connector and 1 x M12 5-pin female connector.) ABB
2TLA030051R0100 Smile 11 EAR (Emergency stop in Smile enclosure, 2 x NC, Status LED in button, 1 x M12 5-pin male connector, reversed button attachement(from bottom).) ABB
2TLA030051R0000 Smile 11 EA (Emergency stop in Smile enclosure, 2 x NC, Status LED in button, 1 x M12 5-pin male connector.) ABB
2TLA030050R0900 Smile 11 EC Tina (Emergency stop in Smile enclosure, Tina adaptation unit included for dynamic ciruit with StatusBus functionality, Status LED in button, 1 x M12 5-pin male connector.) ABB
2TLA030050R0700 Smile 11 SAR Tina (Machine stop(Black button) in Smile enclosure, Tina adaptation unit included for dynamic ciruit, Status LED in button, 1 x M12 5-pin male connector, reversed button attachement(from bottom).) ABB
2TLA030050R0600 Smile 12 SA Tina (Machine stop(Black button) in Smile enclosure, Tina adaptation unit included for dynamic ciruit, Status LED in button, 1 x M12 5-pin male connector and 1 x M12 5-pin female connector.) ABB
2TLA030050R0500 Smile 11 SA Tina (Machine stop(Black button) in Smile enclosure, Tina adaptation unit included for dynamic ciruit, Status LED in button, 1 x M12 5-pin male connector.) ABB
2TLA030050R0400 Smile 10 EA Tina (Emergency stop in Smile enclosure, Tina adaptation unit included for dynamic ciruit, Status LED in button, 1 meter 5-pole cable out from bottom.) ABB
2TLA030050R0200 Smile 12 EA Tina (Emergency stop in Smile enclosure, Tina adaptation unit included for dynamic ciruit, Status LED in button, 1 x M12 5-pin male connector and 1 x M12 5-pin female connector.) ABB
2TLA030050R0100 Smile 11 EAR Tina (Emergency stop in Smile enclosure, Tina adaptation unit included for dynamic ciruit, Status LED in button, 1 x M12 5-pin male connector, reversed button attachement(from bottom).) ABB
2TLA030050R0000 Smile 11 EA Tina (Emergency stop in Smile enclosure, Tina adaptation unit included for dynamic ciruit, Status LED in button, 1 x M12 5-pin male connector.) ABB
2TLA022316R3200 Smile 11RO3 Reset button Orion3B (Reset light button in Smile enclosure for connection to Orion3 Base using M12-3R or Tina 10B (M12-CTO3B necessary). One M12-5 pole male connector.) ABB
2TLA020054R1900 Tina 5A ver G Bypassunit (Bypass unit for DYNlink devices with supervision of the bypass lamp.) ABB
2TLA020054R1800 Tina 12A Connection block 2 DYNlink M12-8 (Connection block for series connection of 2 DYNlink devices with M12-8 connectors, e.g. Magne, Dalton M12 with Eden DYN or Knox (M12-8). Two M12-8 female connectors for the devices and one M12-8 male connector towards the DYNlink loop.) ABB
2TLA020054R1700 Tina 11A Connection block 2 DYNlink M12-5 (Connection block for series connection of 2 DYNlink devices with M12-5 connectors. Two M12-5 female connectors for the devices and one M12-5 male connector towards the DYNlink loop.) ABB
2TLA020054R1600 Tina 10C Adapter OSSD+supply transmitter (Adaptation of devices with OSSD outputs, like light guards, to the DYNlink solution with possibility to power the transmitter. Tina 10C has one M12-5 male connector towards the DYNlink loop, one M12-8 female connector towards the OSSD device and one M12-5 female connector for the supply of the transmitter (0V and +24VDC)) ABB
2TLA020054R1300 Tina 10B Adapter OSSD with local reset (Adaptation of devices with OSSD outputs, like light guards, to the DYNlink solution with possibility to connect a local reset button. Tina 10B has one M12-5 male connector towards the DYNlink loop, one M12-8 female connector towards the OSSD device and one M12-5 female connector for the local reset button.) ABB
2TLA020054R1200 Tina 10A Adapter OSSD (Adaptation of devices with OSSD outputs, like light guards, to the DYNlink solution. Tina 10A has one M12-5 male connector towards the DYNlink loop and one M12-8 female connector towards the OSSD device.) ABB
2TLA020054R1100 Tina 2B Adapter 2 contacts inside device (Adaptation of devices with 2 positively driven force-guided contacts like emergency stop buttons and key switches, to the DYNlink solution. Tina 2B is placed inside the safety device enclosure.) ABB
2TLA020054R0700 Tina 7A Adapter 2 contacts inside cabinet (Adaptation of devices with 2 positively driven force-guided contacts like emergency stop buttons and key switches, to the DYNlink solution. Tina 7A is mounted on a DIN rail in the electrical cabinets and the connected safety device(s) must be mounted on the same cabinet, e.g. an emergency-stop button mounted on the cabinet. Electrical connection via detachable terminal blocks.) ABB
2TLA020054R0600 Tina 6A Adapter mats, edges & bumpers (Adaptation of pressure sensitive devices with short-circuit detection, like safety mats, safety edges and bumpers, to the DYNlink solution. Tina 6A has one M12-5 male connector towards the DYNlink loop and one M12-5 female connector towards the safety device.) ABB
2TLA020054R0500 Tina 8A Connection block 8 devices (Connection block for series connection of up to 8 DYNlink devices. Eight M12-5 female connectors for the devices. The information signal of each device can be wired separately. The cable used for the connection to the Tina 8A should have a diameter 7 - 12 mm. If less than 8 devices are connected, complete with Tina 1A blind plugs.) ABB
2TLA020054R0300 Tina 4A Connection block 4 devices (Connection block for series connection of up to 4 DYNlink devices. Four M12-5 female connectors for the devices. The information signal of each device can be wired separately. The cable used for the connection to the Tina 4A should have a diameter 7 - 12 mm. If less than a devices are connected, complete with Tina 1A blind plugs.) ABB
2TLA020054R0200 Tina 3A Adapter 2 contacts M12-5 (Adaptation of devices with 2 positively driven force-guided contacts like emergency stop buttons and key switches, to the DYNlink solution. Tina 3A is mounted directly on the device enclosure to a M20 cable entry and has a M12-5 male connector for connection to the DYNlink loop.) ABB
2TLA020054R0100 Tina 2A Adapter 2 contacts (Adaptation of devices with 2 positively driven force-guided contacts like emergency stop buttons and key switches, to the DYNlink solution. Tina 2A is mounted directly on the device enclosure to a M20 cable entry.) ABB
2TLA020054R0000 Tina 1A Blind plug (Tina 1A blind plug is connected to the unused M12 connectors of the connection blocks Tina 4A or Tina 8A. M12-5 male connector.) ABB
2TLA020053R6300 Safety Screw Kit SM4x25mm (Special safety screw to eliminate risk of manipulation. Lenght adapted for Adam & Eva, E-version. 4pcs M4x25mm + 1pcs Safety screw Bit. Screws made in A2 Stainless steel.) ABB
2TLA020053R6200 Safety Screw Kit SM4x20mm (Special safety screw to eliminate risk of manipulation. Lenght adapted for Adam & Eva. 4pcs M4x20mm + 1pcs Safety screw Bit. Screws made in A2 Stainless steel.) ABB
2TLA020053R4300 Safety screw SM4x25, stainless steel (Special safety screw to eliminate the risk of manipulation/tampering. 1pc M4x25mm. A2 stainless steel. Length adapted to Adam E and Eva E.) ABB
2TLA020053R4200 Safety screw SM4x20, stainless steel (Special safety screw to eliminate the risk of manipulation/tampering. 1pc M4x20mm. A2 stainless steel. Length adapted to Adam & Eva.) ABB
2TLA020009R0600 Spot 10 Transmitter + Receiver (Safety light beam for up to 10 m distance. M18 steel casing with M12 connector.) ABB
2TLA020007R1900 Safeball Protection Coat (Extra protection coat for Safeball.) ABB
2TLA076002R0200 AL 25-14 Al-profile for 25-xx, meter (Aluminum profile for safety edge GE and GP for T-base. Width 25 mm, hight 14mm.) ABB
2TLA020074R9300 AS-i Cable Black PUR 24VDC (Cable for AS-i additonal power 24VDC, Black, PUR) ABB
2TLA020074R9200 AS-i Cable Yellow PUR 30VDC (Cable for AS-i power and data 30VDC, Yellow, PUR) ABB
2TLA020074R9100 AS-i Cable Black 24VDC EPDM (Cable for AS-i additonal power, +24 VDC, black, EPDM.) ABB
2TLA020074R9000 AS-i Cable Yellow 30VDC EPDM (Cable for AS-i power and data, +30 VDC, yellow, EPDM.) ABB
2TLA020073R0900 AS-i Addressing unit cable (Cable for addressing Urax adapters with, for ex., Fixa. M12-5 male connector on one side and jack socket on the other side.) ABB
2TLA020073R0800 AS-i Addressing unit (Addressing tool to configurate AS-i nodes/slaves.) ABB
2TLA020073R0400 AS-i+24VDC to M12 1m cable (Flat cable connector, both AS-i power and AUX power to M12. 1 m cable.) ABB
2TLA020073R0300 AS-i Splitter box (As-i flat cable splitter used to make T-connections and to extend AS-i flat cables.) ABB
2TLA020073R0000 AS-i T-connector with M12 (M12-5 female connector with vampire connector for AS-i flat cable.) ABB
2TLA076310R1200 Safety mat ASK-1T4.4-NP 1000x1500mm (Safety mat ASK-1T4.4-NP, cast-in ramp edge trim, safeguarded area is 1000 x 1500 mm, incl. 5 + 5 m cables.) ABB
2TLA076310R1100 Safety mat ASK-1T4.4-NP 1000x1000mm (Safety mat ASK-1T4.4-NP, cast-in ramp edge trim, safeguarded area is 1000 x 1000 mm, incl. 5 + 5 m cables.) ABB
2TLA076310R1000 Safety mat ASK-1T4.4-NP 750x1000mm (Safety mat ASK-1T4.4-NP, cast-in ramp edge trim, safeguarded area is 1000 x 750 mm, incl. 5 + 5 m cables.) ABB
2TLA076310R0700 Safety mat ASK-1U4.4-NP 1000x1500mm (Safety mat ASK-1U4.4-NP, no ramp edge trim, safeguarded area is 1000 x 1500 mm, incl. 5 + 5 m cables.) ABB
2TLA076310R0600 Safety mat ASK-1U4.4-NP 1000x1000mm (Safety mat ASK-1U4.4-NP, no ramp edge trim, safeguarded area is 1000 x 1000 mm, incl. 5 + 5 m cables.) ABB
2TLA076310R0500 Safety mat ASK-1U4.4-NP 750x1000mm (Safety mat ASK-1U4.4-NP, No ramp edge trim, safeguarded area is 1000 x 750 mm, incl. 5 + 5 m cables.) ABB
2TLA076301R0600 Safety mat ASK-1T4.4-NP, sqm (Safety mat ASK-1T4.4-NP, cast-in ramp edge trim, size and shape according to order, m2, incl. 5 + 5 m cables.) ABB
2TLA076301R0500 Safety mat ASK-1U4.4-NP, sqm (Safety mat ASK-1U4.4-NP, no ramp edge trim, size and shape according to order, m2, incl. 5 + 5 m cables.) ABB
2TLA076301R0200 Safety mat CM, base price, ramp rail (Applies for custom made safety mats ASK-1T4 model. Special shape can be orderd on request. NOTE: Maximum safeguarded area is 2350x1350mm.) ABB
2TLA076301R0000 Safety mat CM, base price, no ramp rail (Applies for custom safety mats ASK-1U4 model, except for special surface(See 2TLA076300R0000) Special shape can be orderd on request. NOTE: Maximum safeguarded area is 2350x1350mm.) ABB
2TLA020057R2025 C13 cable 11x0.51+2x0.82 shielded 250m (C13 cable 11x0.51+2x0.82 shielded 250m on spool.) ABB
2TLA020057R2010 C13 cable 11x0.51+2x0.82 shielded 100m (C13 cable 11x0.51+2x0.82 shielded 100m on spool.) ABB
2TLA020057R0050 C5 cable 5x0.34 shielded 500m (C5 cable 5x0.34 shielded 500m on spool.) ABB
2TLA020057R0020 C5 cable 5x0.34 shielded 200m (C5 cable 5x0.34 shielded 200m on spool.) ABB
2TLA020057R0010 C5 cable 5x0.34 shielded 100m (C5 cable 5x0.34 shielded 100m on spool.) ABB
2TLA020057R0005 C5 cable 5x0.34 shielded 50m (C5 cable 5x0.34 shielded 50m on spool.) ABB
2TLA020057R0001 C5 cable 5x0.34 shielded 10m (C5 cable 5x0.34 shielded 10m on spool.) ABB
2TLA020053R0700 DA 1B Distance plate (Spare part. 4 distance plates in yellow PBT. Thickness 2.5 mm. For all Adam and Eva except Adam E and Eva E.) ABB
2TLA020053R0600 DA 3A Converting plate Eden E to Eden (Converting plate in stainless steel for replacing Eden E with Eden DYN or Eden OSSD.) ABB
2TLA020053R0300 DA 2B Distance ring (Spare part. 4 distance rings 4.5 x 8 x 4 mm in black polyamide. To be mounted in Adam/Eva mounting holes.) ABB
2TLA020053R0100 DA 2 Distance ring (Mounting spacer 4.5 x 8 x 4 mm, in black polyamide, for use with Adam and Eva units.) ABB
2TLA020053R0000 DA 1 Distance plate (Protection plate, thickness 2.5 mm, polycarbonate. For Adam M12 and associated Eva. Not suitable for Adam E and Eva E.) ABB
2TLA076125R4000 GP Safety contact edge 25-40 NBR (GP series safety edge. NBR part in meters, 25mm widht, 40mm height, with T-base.) ABB
2TLA076125R2500 GP Safety contact edge 25-25 NBR (GP series safety edge. NBR part in meters, 25mm widht, 25mm height, with T-base.) ABB
2TLA076025R4000 GP Safety contact edge 25-40 EPDM (GP series safety edge. EPDM part in meters, 25mm widht, 40mm height, with T-base.) ABB
2TLA076025R2500 GP Safety contact edge 25-25 EPDM (GP series safety edge. EPDM part in meters, 25mm widht, 25mm height, with T-base.) ABB
2TLA076009R1100 GP Product. cost, custom cable length x+x m (GP series safety edge. Production cost when making GP safety edges in custom cable lenght. Cable length and distribution it’s necassary to specify when ordering. Cable is added as an extra article (Cable LIYY) (article number) ABB
2TLA076009R1000 GP Production cost 10+10 m cable (GP series safety edge. Production cost and cable cost when making GP safety edges.) ABB
2TLA076009R0900 GP Production cost 7+10 m cable (GP series safety edge. Production cost and cable cost when making GP safety edges.) ABB
2TLA076009R0800 GP Production cost 7+7 m cable (GP series safety edge. Production cost and cable cost when making GP safety edges.) ABB
2TLA076009R0700 GP Production cost 5+10 m cable (GP series safety edge. Production cost and cable cost when making GP safety edges.) ABB
2TLA076009R0600 GP Production cost 5+7 m cable (GP series safety edge. Production cost and cable cost when making GP safety edges.) ABB
2TLA076009R0500 GP Production cost 5+5 m cable (GP series safety edge. Production cost and cable cost when making GP safety edges.) ABB
2TLA076009R0400 GP Production cost 2+10 m cable (GP series safety edge. Production cost and cable cost when making GP safety edges.) ABB
2TLA076009R0300 GP Production cost 2+7 m cable (GP series safety edge. Production cost and cable cost when making GP safety edges.) ABB
2TLA076009R0200 GP Production cost 2+5 m cable (GP series safety edge. Production cost and cable cost when making GP safety edges.) ABB
2TLA076009R0100 GP Production cost 2+2m cable (GP series safety edge. Production cost and cable cost when making GP safety edges.) ABB
2TLA050220R0025 EStrongZX E-Stop 2NC, 3m, SS, EX (Emergency stop for explosion proof environment, 2NC, stainless steel 316 body, pre-wired with 3 m cable) ABB
2TLA042021R5600 JSM 40 Angle bracket (45 deg angle mounting bracket in steel for mounting profiles together, pre-assembled.) ABB
2TLA042020R3200 JSM 42 L-bracket special premounted (L-shaped special mounting bracket in aluminium for mounting profiles together, pre-assembled.) ABB
2TLA042020R3100 JSM 43 U-bracket special premounted (U-shaped special mounting bracket in aluminium for mounting profiles together, pre-assembled.) ABB
2TLA040037R9900 JSM A3130C guide rail incl. mounting components (Guiding rail. JSM D5 fit this rail. Natural anodized Aluminium, standard length 6100mm. Max length 6100mm) ABB
2TLA040037R9800 JSM A44A Aluminum profile 44x44 1400mm (Aluminium profile, 44x44mm, natural anodized L=1400 mm.) ABB
2TLA040037R8100 JSM A4426 Aluminum profile 44x26 6000mm (Alluminium profile 44x26mm natural anodized L=6000 mm.) ABB
2TLA040037R8000 JSM A4426 Aluminum profile 44x26, meter (Aluminium profile, 44x26mm, natural anodized cut to length, max 6000mm.) ABB
2TLA040037R7400 JSM A4416 Aluminum profile 44x16,5 6000mm (Aluminium profile, 44x16mm, natural anodized L=6000 mm.) ABB
2TLA040037R7000 JSM A4416 Aluminum profile 44x16,5, meter (Aluminium profile, 44x16mm, natural anodized cut to length max 6000mm.) ABB
2TLA040037R5300 JSM A13-2020 H-profile L=2020 (H-profile for Quick-Guard E. Natural anodized Aluminium. Length 2020mm) ABB
2TLA040037R5200 JSM A13-1476 H-profile L=1476 (H-profile for Quick-Guard E. Natural anodized Aluminium. Length 1476mm) ABB
2TLA040037R5100 JSM A13-1076 H-profile L=1076 (H-profile for Quick-Guard E. Natural anodized Aluminium. Length 1076mm) ABB
2TLA040037R5000 JSM A13 H-profile, meter (H-profile for Quick-Guard E. Natural anodized Aluminium. Cut to length, max 2020mm) ABB
2TLA040037R4900 JSM A56 Guiding rail, aluminium incl. screw, meter (Guiding rails for slidingdoors. JSM D5 fit this rail. Natural anodized Aluminium, max length 6000mm) ABB
2TLA040037R4700 JSM A12-2000 U-profile L=2000mm (U-profile for Quick-Guard E. Natural anodized Aluminium. Length 2000mm) ABB
2TLA040037R4600 JSM A12-1476 U-profile L=1476mm (U-profile for Quick-Guard E with length 1500mm c-c profiles . Natural anodized Aluminium. Length 1476mm) ABB
2TLA040037R4500 JSM A4488A Aluminum profile 44x88 6000mm (Aluminium profile, 44x88mm, natural anodized L=6000 mm.) ABB
2TLA040037R4400 JSM A4488A Aluminum profile 44x88 2200mm (Aluminium profile, 44x88mm, natural anodized L=2200 mm.) ABB
2TLA040037R4300 JSM A4488A Aluminum profile 44x88 2000mm (Aluminium profile, 44x88mm, natural anodized L=2000 mm.) ABB
2TLA040037R4200 JSM A4488A Aluminum profile 44x88, meter (Aluminium profile, 44x88mm, natural anodized cut to length.) ABB
2TLA040037R4100 JSM A44A Aluminum profile 44x44 6000mm (Aluminium profile, 44x44mm, natural anodized L=6000 mm.) ABB
2TLA040037R4000 JSM A44A Aluminum profile 44x44 2500mm (Aluminium profile, 44x44mm, natural anodized L=2500 mm.) ABB
2TLA040037R3900 JSM A44A Aluminum profile 44x44 2400mm (Aluminium profile, 44x44mm, natural anodized L=2400 mm.) ABB
2TLA040037R3800 JSM A44A Aluminum profile 44x44 2200mm (Aluminium profile, 44x44mm, natural anodized L=2200 mm.) ABB
2TLA040037R3700 JSM A44A Aluminum profile 44x44 2000mm (Aluminium profile, 44x44mm, natural anodized L=2000 mm.) ABB
2TLA040037R3600 JSM A44A Aluminum profile 44x44 1100mm (Aluminium profile, 44x44mm, natural anodized L=1100 mm.) ABB
2TLA040037R3500 JSM A44A Aluminum profile 44x44, meter (Aluminium profile, 44x44mm, natural anodized cut to length.) ABB
2TLA040037R2800 JSM A12 U-profile, meter (U-profile for Quick-Guard E. Natural anodized Aluminium. Cut to length, max 2000mm) ABB
2TLA040037R2700 JSM A12-1076 U-profile L=1076 (U-profile for Quick-Guard E with length 1100mm c-c profiles . Natural anodized Aluminium. Length 1076mm) ABB
2TLA040037R1300 JSM A25A Cable duct 44x25 incl. cap, L= 2000mm (Cable duct 44x25mm with holes c-c =500mm diameter=5. Natural anodized Aluminium. Lenght 2000mm) ABB
2TLA040037R0800 JSM A56-2000 Guiding rail incl. Screw, L=2000, Aluminum (Guiding rails for slidingdoors. JSM D5 fit this rail. Natural anodized Aluminium, length 2000mm) ABB
2TLA040033R3100 JSM 37 Support clip Express (Spacer screw for Quick-Guard E. Used to keep the distance between the mesh and the floor.) ABB
2TLA040033R1400 JSM 35-K Hinge with screw c-c47 (Hinge C/C 47mm in Zinc-plated steel, pre-assembled. Used as angled bracket in Quick-Guard S) ABB
2TLA040030R1800 JSM 44-K Angle bracket 70 deg (Bracket in aluminium for mounting profiles together. pre-assembled.) ABB
2TLA040030R1700 JSM 45-K2 Angle bracket 20 deg left (Bracket in aluminium for mounting profiles together. pre-assembled.) ABB
2TLA040030R1600 JSM 45-K1 Angle bracket 20 deg right (Bracket in aluminium for mounting profiles together. pre-assembled.) ABB
2TLA040030R1500 JSM 34B-K I-bracket premounted with screw (I- shaped mounting bracket in Aluminium for mounting the profiles together. Dimension 41x85x6mm, pre-assembled.) ABB
2TLA040030R1400 JSM 39-K Floor/angle bracket, premounted, Aluminum (Floor bracket in Aluminium. Dimension 40x70x100mm, pre-assembled. Not recommended for fences with height over 2500mm) ABB
2TLA040030R1300 JSM 31B-K Small angular bracket (Small angled bracket in aluminium. Dimension 40x40x40mm. with two counter sunk holes, pre-assembled.) ABB
2TLA040030R1100 JSM 30B-K1 Angle bracket with four screws (Big angled bracket in Aluminium. Dimension 42x100x100mm, pre-assembled with 4 screws.) ABB
2TLA040030R1000 JSM 36-K2 Floorbracket in steel for JSM A44A (Floorbracket in Zinc-plated steel. Dimension 44x160x140mm, pre-mounted. Suitable for 44x44mm profiles) ABB
2TLA040030R0900 JSM 36-K1 Floorbracket in steel for JSM A4488A (Floorbracket in Zinc-plated steel. Dimension 44x160x140mm, pre-mounted. Suitable for 44x88/88x88mm profiles) ABB
2TLA040030R0800 JSM 33B-K T-bracket premounted (T- shaped mounting bracket in Aluminium for mounting profiles together, pre-assembled.) ABB
2TLA040030R0700 JSM 32B-K L-bracket premounted (L- shaped mounting bracket in Aluminium for mounting profiles together, pre-assembled.) ABB
2TLA040030R0600 JSM 30B-K Floor bracket (Floor bracket in aluminium. Dimension 42x100x100mm, pre-mounted.) ABB
2TLA040030R0400 JSM 31A1-K Small angular bracket one countersunk hole (Small angled bracket in aluminium. Dimension 40x40x40mm. with one counter sunk hole, pre-assembled.) ABB
2TLA040005R0500 JSM 55 Wall bracket for JSHD4 (Wall bracket for JSHD4 enabling device.) ABB
2TLA040001R1500 JSM 70 adjustment plate for post (Adjustment plate for post to a light protection system) ABB
2TLA020205R6400 JSM 50H Bracket for Eden sensor (Bottom plate for mounting of an Eva on the JSHD4 in order to monitor the position of the JSHD4 when not in use. Adam and Eva are sold separately.) ABB
2TLA020205R6300 JSM 50G Bracket for key switches (Big bottom plate for mounting of two actuators/keys of safety interlock switches on the JSHD4 in order to monitor the position of the JSHD4 when not in use. If used with Mkey5, use bracket JSM5B for the switches.) ABB
2TLA020205R2800 JSM 54A Wall bracket for Adam (Wall bracket to mount Adam. Used with JSHD4 three position devices having an AL bottom part, i.e. JSHD4-x-AL(-A). The AL bottom part has a holder for Eva. Adam and Eva are ordered separately.) ABB
2TLA020051R6000 Adam AS-i M12-4 connector (Adam safety sensor unit with AS-i node. M12-4 male connector, IP69K, yellow. 4pcs of DA 1 distance plates and 4pcs of DA 2B distance rings are included.) ABB
2TLA020051R5900 Adam OSSD-Reset M12-8 connector (Adam safety sensor unit with OSSD signals and reset with indication. M12-8 male connector, IP69K, yellow. 4pcs of DA 1B distance plates and 4pcs of DA 2B distance rings are included.) ABB
2TLA020051R5700 Adam OSSD-Info M12-8 connector (Adam safety sensor unit with OSSD signals and information output. M12-8 male connector, IP69K, yellow. 4pcs of DA 1B distance plates and 4pcs of DA 2B distance rings are included.) ABB
2TLA020051R5600 Adam OSSD-Reset M12-5 connector (Adam safety sensor unit with OSSD signals and reset with indication. M12-5 male connector, IP69K, yellow. 4pcs of DA 1B distance plates and 4pcs of DA 2B distance rings are included.) ABB
2TLA020051R5400 Adam OSSD-Info M12-5 connector (Adam safety sensor unit with OSSD signals and information output. M12-5 male connector, IP69K, yellow. 4pcs of DA 1B distance plates and 4pcs of DA 2B distance rings are included.) ABB
2TLA020051R5300 Adam DYN-Reset M12-5 connector (Adam safety sensor unit with dynamic signal and reset with indication. M12-5 male connector, IP69K, yellow. 4pcs of DA 1B distance plate and 4pcs of DA 2B distance rings are included.) ABB
2TLA020051R5100 Adam DYN-Info M12-5 connnector (Adam safety sensor unit with dynamic signal and information output. M12-5 male connector, IP69K, yellow. 4pcs of DA 1B distance plates and 4pcs of DA 2B distance rings are included.) ABB
2TLA020051R4300 Adam 10m cable with M12, Grey (Adam safety sensor unit with 10m of cable(5 x 0.34 mm2 + screen) and M12, IP67, grey, 4pcs of DA1 protection plate and 4pcs of DA2 spacer rings are included.) ABB
2TLA020051R4200 Adam 3m cable with M12, Grey (Adam safety sensor unit with 3m of cable(5 x 0.34 mm2 + screen) and M12, IP67, grey, 4pcs of DA1 protection plate and 4pcs of DA2 spacer rings are included.) ABB
2TLA020051R4100 Adam E 10m cable with M12, Grey (Adam safety sensor unit, encapsulated in polyurethane for harsh environments with 10m of cable(5 x 0.34 mm2 + screen) and M12, IP69K, grey.) ABB
2TLA020051R4000 Adam E 0,5m cable with M12, Grey (Adam safety sensor unit, encapsulated in polyurethane for harsh environments with 0.5m of cable(5 x 0.34 mm2 + screen) and M12, IP69K, grey.) ABB
2TLA020051R3600 Adam 3m yellow cable with M12 male (Adam safety sensor unit with 3m of yellow cable(5 x 0.34 mm2 + screen) and M12, IP67, yellow, 4pcs of DA1 protection plate and 4pcs of DA2 spacer rings are included.) ABB
2TLA020051R2000 Adam 0,5m cable with M12 (Adam safety sensor unit with 0.5m of cable(5 x 0.34 mm2 + screen) and M12, IP67, yellow 4pcs of DA1 protection plate and 4pcs of DA2 spacer rings are included.) ABB
2TLA020051R0900 Adam E 1m cable with M12 (Adam safety sensor unit, encapsulated in polyurethane for harsh environments with 1m of cable(5 x 0.34 mm2 + screen) and M12, IP69K.) ABB
2TLA020051R0800 Adam E 20m cable with M12 (Adam safety sensor unit, encapsulated in polyurethane for harsh environments with 20m of cable(5 x 0.34 mm2 + screen) and M12, IP69K, yellow.) ABB
2TLA020051R0700 Adam E 0,5m cable with M12 (Adam safety sensor unit, encapsulated in polyurethane for harsh environments with 0.5m of cable(5 x 0.34 mm2 + screen) and M12, IP69K, yellow.) ABB
2TLA020051R0600 Adam E 10m cable with M12 (Adam safety sensor unit, encapsulated in polyurethane for harsh environments with 10m of cable(5 x 0.34 mm2 + screen) and M12, IP69K, yellow.) ABB
2TLA020051R0500 Adam 20 m cable with M12 (Adam safety sensor unit with 20m of cable(5 x 0.34 mm2 + screen) and M12, IP67, yellow, 4pcs of DA1 protection plate and 4pcs of DA2 spacer rings are included.) ABB
2TLA020051R0400 Adam 10m cable with M12 (Adam safety sensor unit with 10m of cable(5 x 0.34 mm2 + screen) and M12, IP67, yellow, 4pcs of DA1 protection plate and 4pcs of DA2 spacer rings are included.) ABB
2TLA020051R0300 Adam E 5m cable with M12 (Adam safety sensor unit, encapsulated in polyurethane for harsh environments with 5m of cable(5 x 0.34 mm2 + screen) and M12, IP69K, yellow.) ABB
2TLA020051R0200 Adam with 3m cable with M12 (Adam safety sensor unit with 3m of cable(5 x 0.34 mm2 + screen) and M12, IP67, yellow, 4pcs of DA1 protection plate and 4pcs of DA2 spacer rings are included.) ABB
2TLA020051R0100 Adam M12, Grey (Adam safety sensor unit with a fixed M12 male connector, IP67, grey, 4pcs of DA1 protection plate and 4pcs of DA2 spacer rings are included.) ABB
2TLA020051R0000 Adam M12 (Adam safety sensor unit with a fixed M12 male connector, IP67, yellow, 4pcs of DA1 protection plate and 4pcs of DA2 spacer rings are included.) ABB
2TLA020006R6000 JSHD4FV Handle ABB
2TLA020006R2201 JSHD4-2 Black LED Anti-tamp tape ABB
2TLA020005R2000 JSHD4 Bottom part AL (Bottom part with JSM 53A and cable gland) ABB
2TLA020005R1900 JSHD4 Bottom part AK Cannon connector (Bottom part with Cannon connector for replacement of former Jokab JSHD4) ABB
2TLA020005R1800 JSHD4 Bottom part AJ Cable Gland+PCB-16 (Bottom part with cable gland and PCB with 16 screw connections.) ABB
2TLA020005R1700 JSHD4 Bottom part AH Cable Gland+PCB-10 (Bottom part with cable gland and PCB with 10 screw connections) ABB
2TLA020005R1600 JSHD4 Bottom part AG M12 4-pol + 1xAS-i (Bottom part with M12 connection (4 poles) and 1 AS-i node (without front and top button).) ABB
2TLA020005R1500 JSHD4 Bottom part AF M12 4-pol + 2xAS-i (Bottom part with M12 connection (4 poles) and 2 AS-i nodes (for front and top button).) ABB
2TLA020005R1400 JSHD4 Bottom part AE M12 8-pol + Estop (Bottom part with M12 connection (8 poles) and emergency stop.) ABB
2TLA020005R1300 JSHD4 Bottom part AD M12 8-pol connector ABB
2TLA020005R1200 JSHD4 Bottom part AC M12 5-pol connector ABB
2TLA020005R1100 JSHD4 Bottom part AB Cannon connector ABB
2TLA020005R1000 JSHD4 Bottom part AA Cable Gland ABB
2TLA020005R0900 JSHD4 Anti-tamper PCBA (Accessories JSHD4. Anti-tamper PCB. Works with top part JSHD4-2 to JSHD4-5, combined with botten part AB, AD, AF, AG, AH or AJ.) ABB
2TLA020003R0900 JSHK1-B Male plug for cable (Accessories JSHD4. 12-pole male Cannon connector for cable mounting.) ABB
2TLA020003R0800 JSHK1-A Female chassis plug (Accessories JSHD4. 12-pole female Cannon connector for cabinet mounting.) ABB
2TLA020003R0700 JSHK1-C Male chassis plug (Accessories JSHD4. 12-pole male Cannon connector for cabinet mounting.) ABB
2TLA020003R0300 JSHK0 12 pole female connector for JSHD4 ABB
2TLA020002R4500 JSHD4H2 3-pos device panel mounting. 6x1200mm leads. (JSHD4H2 Three-position control device for internal panel mounting. 6x1200mm leads.) ABB
2TLA019995R5900 JSHD4-5-AL-A Enabling switch (Three-position device. Top part with LEDs and top button. Bottom part with cable gland, anti-tamper PCB and holder for Eva safety sensor.) ABB
2TLA019995R5800 JSHD4-5-AL Enabling switch (Three-position device. Top part with LEDs and top button. Bottom part with cable gland and holder for Eva safety sensor.) ABB
2TLA019995R5700 JSHD4-5-AK Enabling switch (Three-position device. Top part with LEDs and top button. Bottom part with Cannon connector. Mainly for replacement of older non modular JSHD4 enabling device (Jokab brand).) ABB
2TLA019995R5600 JSHD4-4-AL-A Enabling switch (Three-position device. Top part with LEDs and front button. Bottom part with cable gland, anti-tamper PCB and holder for Eva safety sensor.) ABB
2TLA019995R5500 JSHD4-4-AL Enabling switch (Three-position device. Top part with LEDs and front button. Bottom part with cable gland and holder for Eva safety sensor.) ABB
2TLA019995R5400 JSHD4-4-AK Enabling switch (Three-position device. Top part with LEDs and front button. Bottom part with Cannon connector. Mainly for replacement of older non modular JSHD4 enabling device (Jokab brand).) ABB
2TLA019995R5300 JSHD4-3-AL-A Enabling switch (Three-position device. Top part with LEDs and no extra buttons. Bottom part with cable gland, anti-tamper PCB and holder for Eva safety sensor.) ABB
2TLA019995R5200 JSHD4-3-AL Enabling switch (Three-position device. Top part with LEDs and no extra buttons. Bottom part with cable gland and holder for Eva safety sensor.) ABB
2TLA019995R5100 JSHD4-3-AK Enabling switch (Three-position device. Top part with LEDs and no extra buttons. Bottom part with Cannon connector. Mainly for replacement of older non modular JSHD4 enabling device (Jokab brand).) ABB
2TLA019995R5000 JSHD4-2-AL-A Enabling switch (Three-position device. Top part with LEDs, front button and top button. Bottom part with cable gland, anti-tamper PCB and holder for Eva safety sensor.) ABB
2TLA019995R4900 JSHD4-2-AL Enabling switch (Three-position device. Top part with LEDs, front button and top button. Bottom part with cable gland and holder for Eva safety sensor.) ABB
2TLA019995R4800 JSHD4-2-AK Enabling switch (Three-position device. Top part with LEDs, front button and top button. Bottom part with Cannon connector. Mainly for replacement of older non modular JSHD4 enabling device (Jokab brand).) ABB
2TLA019995R4700 JSHD4-1-AL Enabling switch (Three-position device. Top part with no LED, no extra buttons. Bottom part with cable gland and holder for Eva safety sensor.) ABB
2TLA019995R1000 JSHD4-2-AJ Enabling Switch (Three-position device. Top part with LEDs, front button and top button. Bottom part with cable gland and PCB with 16 screw connections.) ABB
2TLA019995R0610 JSHD4-2-AF Black ABB
2TLA081200R1300 Contact block 4 grey (Contact block for safety relays. 4 poles. Grey.) ABB
2TLA076008R0000 GE Production cost (Service cost if assemble of GE safety edge made by ABB Jokab Safety.) ABB
2TLA076005R8600 GE Plug insert tool for KS 6 (Tool to make it easier to attach the KS6 connector to the GE safety edge.) ABB
2TLA076005R7700 GE Glueing set large (GE series safety edge acessorie. Large glueing set for making GE safety edges. Glue, prime & activator 20gr/10 ml.) ABB
2TLA076005R7600 GE Glueing set small (GE series safety edge acessorie. Small glueing set for making GE safety edges. Glue, prime & activator 5gr/5 ml.) ABB
2TLA076005R6200 GE EK 225 T End cap for GE25-25 (GE series safety edge. EK is an end cap for GE safety edges. For GE25-25.) ABB
2TLA076005R6100 GE EK 245 T End cap for GE25-45 (GE series safety edge. EK is an end cap for GE safety edges. For GE25-45.) ABB
2TLA076005R4700 GE KS 6 plug with resistor 8,2 kOhm (GE series safety edge. KS 6 is an end connection for GE safety edges wider than 25mm. Resistor of 8,2 kOhm) ABB
2TLA076005R4600 GE KS 6 connector with with 10m cable (GE series safety edge. KS 6 is an end connection for GE safety edges wider than 25mm. Cable length 10 meters.) ABB
2TLA076005R4500 GE KS 6 connector with with 5m cable (GE series safety edge. KS 6 is an end connection for GE safety edges wider than 25mm. Cable length 5 meters.) ABB
2TLA076005R4400 GE KS 6 connector with 2.5m cable (GE series safety edge. KS 6 is an end connection for GE safety edges wider than 25mm. Cable length 2.5 meters.) ABB
2TLA076005R4000 GE KS6 connector with 0.5 m cable (GE series safety edge. KS 6 is an end connection for GE safety edges wider than 25mm. Cable length 0.5 meters.) ABB
2TLA076005R0400 GE Safety contact edge 25-45 EPDM (GE series safety edge. EPDM part in meters, 25mm widht, 45mm height, with T-base.) ABB
2TLA076005R0200 GE Safety contact edge 25-25 EPDM (GE series safety edge. EPDM part in meters, 25mm widht, 25mm height, with T-base.) ABB
2TLA076002R1800 Cable LIYY 2x0.34, meter (If 2TLA076009R1100, 2TLA076009R1800 or 2TLA076009R2000 choosen it's necasssary to add this cables to the desired length. For GP safety edges.) ABB
2TLA050220R0222 EstrongZ E-Stop 2NC/2NO, M20, SS, LED (Emergency stop, 2NC/2NO, stainless steel 316 body, LED status indication, Conduit entry 3xM20) ABB
2TLA050220R0020 EstrongZ E-Stop 2NC/2NO, M20, SS (Emergency stop, 2NC/2NO, stainless steel 316 body, Conduit entry 3xM20) ABB
2TLA050210R8030 Eyebolt M8x1.25, Galvanized (8pcs) (Eyebolt M8x1.25 for Emergency Pull Wire Switch systems, 8pcs, Galvanized.) ABB
2TLA050210R8020 Eyebolt M8x1.25, Stainless Steel (8pcs) (Eyebolt M8x1.25 for Emergency Pull Wire Switch systems, 8 pcs, Stainless Steel.) ABB
2TLA050210R6030 Corner pulley, Galvanized (Corner pulley for Emergency Pull Wire Switch systems, Galvanized. For navigating corners, both inside and outside.) ABB
2TLA050040R0004 Conduit Plug M20x1.5 ABB
2TLA041069R0000 Endnut M10 for JSM A44 ABB
2TLA030054R1000 Emergency Stop Sign, 32.5mm (Yellow surround for panel mounted emergency stop button, for 32.5 mm hole.) ABB
2TLA030054R0900 Emergency Stop Sign, 22.5mm (Yellow surround for panel mounted emergency stop button, for 22.5 mm hole.) ABB
2TLA030054R0800 Emergency Stop Sign EN F D, 32.5mm (Yellow surround for panel mounted emergency stop button, for 32.5.5 mm hole, with text in English, French and German.) ABB
2TLA030054R0600 Emergency Stop Sign EN F D, 22.5mm (Yellow surround for panel mounted emergency stop button, for 22.5 mm hole, with text in English, French and German.) ABB
2TLA020160R4200 Fox 222 (2 pedal foot switch with two positions. Robust metal housing.) ABB
2TLA020160R4100 Fox 221 (1 pedal foot switch with two positions. Robust metal housing.) ABB
2TLA020160R3200 Fox 232 (2 pedal safety foot switch with three positions. Reset function for buttom position. Robust metal housing.) ABB
2TLA020160R3100 Fox 231 (1 pedal safety foot switch with three positions. Reset function for buttom position. Robust metal housing.) ABB
2TLA020106R1000 Knox red handle (Knox red handle. Spare part.) ABB
2TLA020106R0900 Knox silver handle (Knox silver handle. Spare part.) ABB
2TLA020106R0800 Knox Shear Pin (Spare part for Knox outer handle.) ABB
2TLA020106R0700 Knox man. unlock. seal-label (Extra seal labels for Knox with manual unlock. 10pcs per package.) ABB
2TLA020106R0600 Knox Escutcheon plate (When mounting Knox on a low door it is recommended to replace emergency release handle to prevent opening from the outside by reaching over.) ABB
2TLA020106R0000 Knox PC plate for mesh door (When mounting Knox on door with mesh the accessory PC plate for Knox is recommended. This is to avoid emergency opening from the outside.) ABB
2TLA020105R6500 Knox 1FX-L v2 sliding door to left, man. Unlock (Knox door part for sliding door that opens to the left with the option for manual unlocking from the outside. Incl. additional fastening fixtures for the frame.) ABB
2TLA020105R6400 Knox 1FX-R v2 sliding door to right, man. Unlock (Knox door part for sliding door that opens to the right with the option for manual unlocking from the outside. Incl. additional fastening fixtures for the frame.) ABB
2TLA020105R6300 Knox 1BX-L v2 in open, hings to left, man. Unlock (Knox door part for inward-opening door with hinges to the left. With the option for manual unlocking from the outside. Lock housing is mounted on inside of door.) ABB
2TLA020105R6100 Knox 1F-L v2 sliding door to left (Knox door part for a sliding door that opens to the left. Incl. additional fastening fixtures for the frame.) ABB
2TLA020105R5900 Knox 1AX-L v2 out open, hings to left, man. Unlock (Knox door part for outward-opening door with hinges to the left. With the option for manual unlocking from the outside.) ABB
2TLA020105R5200 Knox 1B-R v2 inward open, hings to right (Knox door part for inward-opening door with hinges to the right. Lock housing is mounted on inside of door.) ABB
2TLA020105R5000 Knox 1A-R v2 outward open, hings to right (Knox door part for outward-opening door with hinges to the right.) ABB
2TLA020105R2300 Knox 2X v2 Frame part, process lock (Process lock version of Knox (no duplicate unlocking signal), with 5-pin M12 contact. Delivered for door with hinges to the right, but can be mirrored. See instructions for mirroring in Knox manual.) ABB
2TLA020105R2200 Knox 2A v2 Frame part (Safety lock Knox frame part with 8-pin M12 contact. Delivered for door with hinges to the right, but can be mirrored. See instructions for mirroring in Knox manual.) ABB
2TLA020072R2000 FIXA Handheld terminal AS-i/Statusbus (Handheld terminal for addressing, configuration and testing of AS-i devices, StatusBus devices, DYNlink devices and conventional PNP devices.) ABB
2TLA020071R9400 GATE-MT Ethernet gateway Modbus TCP (Gateway for 2-way communication between the Pluto bus and Ethernet. Ethernet protocol Modbus TCP.) ABB
2TLA020071R9300 GATE-PN Ethernet gateway PROFINET (Gateway for 2-way communication between the Pluto bus and Ethernet. Ethernet protocol PROFINET.) ABB
2TLA020071R9200 GATE-S3 Ethernet gateway SERCOS III (Gateway for 2-way communication between the Pluto bus and Ethernet. Ethernet protocol SERCOS III.) ABB
2TLA020071R9100 GATE-EC Ethernet gateway EtherCAT (Gateway for 2-way communication between the Pluto bus and Ethernet. Ethernet protocol EtherCAT.) ABB
2TLA020071R9000 GATE-EIP Ethernet gateway EtherNet/IP (Gateway for 2-way communication between the Pluto bus and Ethernet. Ethernet protocol EtherNet I/P.) ABB
2TLA020070R3900 Connector for absolute encoder (Female 12 pole connector for absolute encoder "RSA 597 connector". Connector to be mounted on the cable.) ABB
2TLA020057R1535 C9 cable 7x0.51+2x0.82 shielded 350m (C9 cable 7x0.51+2x0.82 shielded 350m on spool.) ABB
2TLA020057R1515 C9 cable 7x0.51+2x0.82 shielded 150m (C9 cable 7x0.51+2x0.82 shielded 150m on spool.) ABB
2TLA020051R8000 Eva AS-i (Eva actuator for use with Adam AS-i sensors in the Eden sensor system, IP69K, yellow, 4pcs of DA2 spacer rings are included.) ABB
2TLA020046R0900 Eva Unique code (Eva actuator with unique code for use with Adam DYN/OSSD sensors in the Eden sensor system, IP69K, yellow, 4pcs of DA 2B spacer rings are included.) ABB
2TLA020046R0800 Eva General code (Eva actuator with general code for use with Adam DYN/OSSD sensors in the Eden sensor system, IP69K, yellow, 4pcs of DA 2B spacer rings are included.) ABB
2TLA020046R0700 Eva E Grey (Eva actuator for use with Adam sensors, encapsulated in polyurethane for harsh environments, IP69K, grey.) ABB
2TLA020046R0600 Eva E (Eva actuator for use with Adam sensors, encapsulated in polyurethane for harsh environments, IP69K, yellow.) ABB
2TLA020046R0100 Eva Grey (Eva actuator for use with Adam sensors in the Eden sensor system, IP67, grey, 4pcs of DA2 spacer rings are included.) ABB
2TLA020046R0000 Eva (Eva actuator for use with Adam sensors in the Eden sensor system, IP67, yellow, 4pcs of DA2 spacer rings are included.) ABB
2TLA020039R1300 Dalton magnet 5x2 25-p ABB
2TLA020039R1200 Dalton magnet 10x5x2 25-p ABB
2TLA020039R1000 Dalton tongue B for top and bottom entry ABB
2TLA020039R0500 Dalton bracket 6 (Fixing plate for Dalton and Eden, small bracket for lock tongue.) ABB
2TLA020039R0300 Dalton bracket 4 (Fixing plates for Dalton and Eden adapted to ABB Jokab Safety fencing system.) ABB
2TLA020039R0200 Dalton bracket 3 (Fixing plates for Dalton adapted to ABB Jokab Safety fencing system.) ABB
2TLA020039R0100 Dalton Fixing kit 2 (Fixing kit for Dalton, lock tongue, Adam and Eva. The lock tongue, Adam and Eva must be ordered separately.) ABB
2TLA020038R3300 Dalton M31 with M12-8 connector (Electromechanical lock with ball latch. M12-5 male connector.) ABB
2TLA020038R3200 Dalton M12 with M12-8 + M12-5 connectors (Electromechanical lock with ball latch. M12-8 male connector and M12-5 female connector for Adam. With Adam and Eva, the interlocking function can reach Ple/SIL3. Adam and Eva should be ordered separetely.) ABB
2TLA020038R3100 Dalton M11 with M12-5 connector (Electromechanical lock with ball latch. M12-8 male connector.) ABB
2TLA050210R0520 50M Wire Kit, Stainless steel (50m Stainless steel wire pull kit. Includes 50m Wire (One end is terminated with thimble and permanent clamp), 20 pcs Eyebolts, 1 pcs Tensioner, 1 pcs Allen Key.) ABB
2TLA020070R4400 Vital 3 Safety Controller (Safety module with one single channel input for dynamic sensors, and one dual channel input for closing switches.) ABB
2TLA020070R4300 Vital 2 Safety Controller (Safety module with two single channel inputs for dynamic sensors.) ABB
2TLA020052R1000 Vital 1 Safety Controller (Safety module with one single channel input for dynamic sensors. Relay outputs 2NO.) ABB
2TLA076300R0900 Corner piece (Corner piece for ramp rail RS14) ABB
2TLA076300R0800 BS 14, Mounting Rail (Edge profile to keep the safety mat in place. Mainly for ASK-1U4 model.) ABB
2TLA076005R8500 GE Scissor for cutting safety edge (Special scirror for cutting safety edge rubber. Helps to get a stright cut.) ABB
2TLA020071R8000 GATE-P2 Pluto Gateway PROFIBUS-DP (Gateway for 2-way communication between the Pluto bus and Profibus.) ABB
2TLA020071R8300 GATE-E2 Pluto Gateway Ethernet (Gateway for 2-way communication between the Pluto bus and Ethernet. Ethernet protocols: Profinet, Ethernet I/P, Modbus TCP) ABB
2TLA020071R8200 GATE-D2 Pluto Gateway DeviceNet (Gateway for 2-way communication between the Pluto bus and Devicenet.) ABB
2TLA020071R8100 GATE-C2 Pluto Gateway CANopen (Gateway for 2-way communication between the Pluto bus and CANopen.) ABB
2TLA020070R3300 Absolute encoder RSA 597 solid 1.5m cable (Absolute encoder RSA 597, single turn, 1.5m cable, 6mm solid shaft.) ABB
2TLA020070R3600 Absolute encoder RSA 597 solid connector (Absolute encoder RSA 597, single turn, connector, 10mm solid shaft.) ABB
2TLA020071R7800 Absolute encoder RSA 698 6mm solid M12 (Absolute encoder RSA 698, multi-turn, M12 connector, 6mm solid shaft.) ABB
2TLA020070R3700 Absolute encoder RSA 698 10 mm solid M12 (Absolute encoder RSA 698, multi-turn, M12 connector, 10mm shaft.) ABB
2TLA020071R7900 Absolute encoder RHA 698 hollow shaft M12 (Absolute encoder RHA 698, multi-turn, M12 connector, hollow shaft, 12mm hole.) ABB
2TLA020070R3400 Absolute encoder RHA 597 hollow 2m cable (Absolute encoder RHA 597, single turn, 2m cable, hollow shaft, 12mm hole.) ABB
2TLA020070R5900 Absolute encoder RHA 597 hollow 10m cable (Absolute encoder RHA 597, singel turn, 10m cable, hollow shaft, 12mm hole.) ABB
2TLA019995R2500 JSHD4-4-AB-A Enabling Switch (Three-position device. Top part with LEDs and front button. Bottom part with Cannon connector and anti-tamper PCB.) ABB
2TLA019995R2400 JSHD4-4-AB Enabling Switch (Three-position device. Top part with LEDs and front button. Bottom part with Cannon connector.) ABB
2TLA020006R2400 JSHD4-4 Top part, Front button, LED, Anti-tamper tape ABB
2TLA019995R2300 JSHD4-3-AJ-A Enabling Switch (Three-position device. Top part with LEDs and no extra buttons. Bottom part with cable gland and PCB with 16 screw connections and anti-tamper PCB.) ABB
2TLA019995R3600 JSHD4-5-AD Enabling Switch (Three-position device. Top part with LEDs and top button. Bottom part with M12-8 connector.) ABB
2TLA019995R3500 JSHD4-5-AB-A Enabling Switch (Three-position device. Top part with LEDs and top button. Bottom part with Cannon connector and anti-tamper PCB.) ABB
2TLA019995R3400 JSHD4-5-AB Enabling Switch (Three-position device. Top part with LEDs and top button. Bottom part with Cannon connector.) ABB
2TLA020006R2500 JSHD4-5 Top part, Top button, LED, Anti-tamper tape ABB
2TLA019995R3300 JSHD4-4-AJ-A Enabling Switch (Three-position device. Top part with LEDs and front button. Bottom part with cable gland and PCB with 16 screw connections and anti-tamper PCB.) ABB
2TLA019995R3200 JSHD4-4-AJ Enabling Switch (Three-position device. Top part with LEDs and front button. Bottom part with cable gland and PCB with 16 screw connections.) ABB
2TLA019995R4100 JSHD4-5-AH-A Enabling Switch (Three-position device. Top part with LEDs and top button. Bottom part with cable gland and PCB with 10 screw connection and anti-tamper PCB.) ABB
2TLA020001R1100 JSHD2C type A Enabling Switch (JSHD2C type A 3-position pushbutton, 3 cables 190mm, Au, IP40) ABB
2TLA020200R4600 JSHD4 Protection coat (Extra protection coat for JSHD4.) ABB
2TLA020001R1300 JSHD2C type K Enabling Switch (JSHD2C type K 3-position pushbutton, 2 cables 290mm, Ag, IP54) ABB
2TLA020001R1400 JSHD2C type F Enabling Switch (JSHD2C type F 3-position pushbutton, 3 cables 850mm, Au, IP54) ABB
2TLA020001R1000 JSHD2C type E Enabling Switch (JSHD2C type E 3-position pushbutton, 3 cables 200mm, Au, IP54) ABB
2TLA020002R0200 JSHD4H2A 3-pos device external Mounting. 6x150mm leads. (JSHD4H2A Three-position control device for external panel mounting. 6x150mm leads.) ABB
2TLA020002R3100 JSHD4H2 3-pos device panel mounting. 6x150mm leads. (JSHD4H2 Three-position control device for internal panel mounting. 6x150mm leads.) ABB
2TLA020007R3200 JSTD1-C Safeball 10m cable (JSTD1-C Safeballs each have 1NO & 1NC independent switches, maximum load of 30VDC - 2A resistive. Ergonomic design with several grip possibilities and low activation force (approx. 2N) and flexible mounting options. Provides highest level of safety for use in two hand control applications when using two Safeballs in conjunction with a JSBR4 safety relay or Pluto Safety PLC. IP67 protection degree, plastic body, 10 meters molded cable.) ABB
2TLA020007R3100 JSTD1-B Safeball 200mm cable (JSTD1-B Safeballs each have 1NO & 1NC independent switches, maximum load of 30VDC - 2A resistive. Ergonomic design with several grip possibilities and low activation force (approx. 2N) and flexible mounting options. Provides highest level of safety for use in two hand control applications when using two Safeballs in conjunction with a JSBR4 safety relay or Pluto Safety PLC. IP67 protection degree, plastic body, 0.2m wires x 4 for direct connection into an enclosure.) ABB
2TLA020007R3000 JSTD1-A Safeball 2m cable (JSTD1-A Safeballs each have 1NO & 1NC independent switches, maximum load of 30VDC - 2A resistive. Ergonomic design with several grip possibilities and low activation force (approx. 2N) and flexible mounting options. Provides highest level of safety for use in two hand control applications when using two Safeballs in conjunction with a JSBR4 safety relay or Pluto Safety PLC. IP67 protection degree, plastic body, 2 meters molded cable.) ABB
2TLA020007R3400 JSTD1-E Safeball 1NO+1NO 200mm cable (JSTD1-E Safeballs each have 2NO independent switches, maximum load of 30VDC - 2A resistive. Ergonomic design with several grip possibilities and low activation force (approx. 2N) and flexible mounting options. Provides highest level of safety for use in two hand control applications when using two Safeballs in conjunction with a JSBR4 safety relay or Pluto Safety PLC. IP67 protection degree, plastic body, 0.2m wires x 4 for direct connection into an enclosure.) ABB
2TLA020007R6000 JSTD25F Twohand station, 5-pole M12 Male (Two-hand device with JSTD1-B Safeballs. Buttons are side mounted on a 44x88 extruded aluminum profile designed for two-hand applications. Pre-wired to a M12 5-pin connector with protective flanges of the safeballs. Highest level of safety can be achieved when used in conjunction with a JSBR4 safety relay or Pluto Safety PLC.) ABB
2TLA020007R6500 JSTD25P-1 Twohand station (Two-hand device with JSTD1-B Safeballs. Safeballs each have 1NO & 1NC independent switches, maximum load of 30VDC - 2A resistive. Ergonomic design with several grip possibilities and low activation force (approx. 2N). Buttons are side mounted on black aluminum profile designed for two-hand applications. Pre-wired to a 9-pin Zylin connector with dual protective flanges of the safeballs. Integrated Eva inside housing for Eden sensor suspension shelf JSM C14. Highest level of safety can be achieved when used in conjunction with a JSBR4 safety relay or Pluto Safety PLC.) ABB
2TLA020007R6300 JSTD25H Twohand station, 8-pole M12 Male (Two-hand device with JSTD1-B Safeballs. Buttons are side mounted on a 44x88 extruded aluminum profile designed for two-hand applications. Pre-wired to a M12 8-pin connector with protective flanges of the safeballs. Highest level of safety can be achieved when used in conjunction with a JSBR4 safety relay or Pluto Safety PLC.) ABB
2TLA019995R4000 JSHD4-5-AH Enabling Switch (Three-position device. Top part with LEDs and top button. Bottom part with cable gland and PCB with 10 screw connection.) ABB
2TLA019995R3900 JSHD4-5-AF-A Enabling Switch (Three-position device. Top part with LEDs and top button. Bottom part with M12-5 connector and 2 AS-i nodes (for front and top button) and anti-tamper PCB.) ABB
2TLA019995R3800 JSHD4-5-AF Enabling Switch (Three-position device. Top part with LEDs and top button. Bottom part with M12-5 connector and 2 AS-i nodes (for front and top button).) ABB
2TLA019995R3700 JSHD4-5-AD-A Enabling Switch (Three-position device. Top part with LEDs and top button. Bottom part with M12-8 connector and anti-tamper PCB.) ABB
2TLA020006R2100 JSHD4-1 Top part (Three-position device.) ABB
2TLA019995R0100 JSHD4-1-AC Enabling Switch (Three-position device. Top part with no LED, no extra buttons. Bottom part with M12-5 connector.) ABB
2TLA019995R0000 JSHD4-1-AA Enabling Switch (Three-position device. Top part with no LED, no extra buttons. Bottom part with cable gland.) ABB
2TLA020006R2200 JSHD4-2 Top part, 2 buttons, LED, Anti-tamper tape (Three-position device incl. LEDs, front button and top button.) ABB
2TLA019995R0400 JSHD4-2-AD Enabling Switch (Three-position device. Top part with LEDs, front button and top button. Bottom part with M12-8 connector.) ABB
2TLA019995R0300 JSHD4-2-AB-A Enabling Switch (Three-position device. Top part with LEDs, front button and top button. Bottom part with Cannon connector and anti-tamper PCB.) ABB
2TLA019995R0200 JSHD4-2-AB Enabling Switch (Three-position device. Top part with LEDs, front button and top button. Bottom part with Cannon connector.) ABB
2TLA019995R4300 JSHD4-5-AJ-A Enabling Switch (Three-position device. Top part with LEDs and top button. Bottom part with cable gland and PCB with 16 screw connections and anti-tamper PCB.) ABB
2TLA019995R4200 JSHD4-5-AJ Enabling Switch (Three-position device. Top part with LEDs and top button. Bottom part with cable gland and PCB with 16 screw connections.) ABB
2TLA019995R2800 JSHD4-4-AF Enabling Switch (Three-position device. Top part with LEDs and front button. Bottom part with M12-5 connector and 2 AS-i nodes (for front and top button).) ABB
2TLA019995R2700 JSHD4-4-AD-A Enabling Switch (Three-position device. Top part with LEDs and front button. Bottom part with M12-8 connector and anti-tamper PCB.) ABB
2TLA019995R2600 JSHD4-4-AD Enabling Switch (Three-position device. Top part with LEDs and front button. Bottom part with M12-8 connector.) ABB
2TLA019995R3100 JSHD4-4-AH-A Enabling Switch (Three-position device. Top part with LEDs and front button. Bottom part with cable gland and PCB with 10 screw connection and anti-tamper PCB.) ABB
2TLA019995R3000 JSHD4-4-AH Enabling Switch (Three-position device. Top part with LEDs and front button. Bottom part with cable gland and PCB with 10 screw connection.) ABB
2TLA019995R2900 JSHD4-4-AF-A Enabling Switch (Three-position device. Top part with LEDs and front button. Bottom part with M12-5 connector and 2 AS-i nodes (for front and top button) and anti-tamper PCB.) ABB
2TLA019995R0700 JSHD4-2-AF-A Enabling Switch (Three-position device. Top part with LEDs, front button and top button. Bottom part with M12-5 connector and 2 AS-i nodes (for front and top button) and anti-tamper PCB.) ABB
2TLA019995R0600 JSHD4-2-AF Enabling Switch (Three-position device. Top part with LEDs, front button and top button. Bottom part with M12-5 connector and 2 AS-i nodes (for front and top button).) ABB
2TLA019995R0500 JSHD4-2-AD-A Enabling Switch (Three-position device. Top part with LEDs, front button and top button. Bottom part with M12-8 connector and anti-tamper PCB.) ABB
2TLA019995R1100 JSHD4-2-AJ-A Enabling Switch (Three-position device. Top part with LEDs, front button and top button. Bottom part with cable gland and PCB with 16 screw connections and anti-tamper PCB.) ABB
2TLA019995R0900 JSHD4-2-AH-A Enabling Switch (Three-position device. Top part with LEDs, front button and top button. Bottom part with cable gland and PCB with 10 screw connections and anti-tamper PCB.) ABB
2TLA019995R0800 JSHD4-2-AH Enabling Switch (Three-position device. Top part with LEDs, front button and top button. Bottom part with cable gland and PCB with 10 screw connections.) ABB
2TLA019995R1300 JSHD4-3-AB-A Enabling Switch (Three-position device. Top part with LEDs and no extra buttons. Bottom part with Cannon connector and anti-tamper PCB.) ABB
2TLA019995R1200 JSHD4-3-AB Enabling Switch (Three-position device. Top part with LEDs and no extra buttons. Bottom part with Cannon connector.) ABB
2TLA020006R2300 JSHD4-3 Top part, LED, Anti-tamper tape ABB
2TLA019995R1600 JSHD4-3-AE Enabling Switch (Three-position device. Top part with LEDs and no extra buttons. Bottom part with M12-8 connector and emergency stop.) ABB
2TLA019995R1500 JSHD4-3-AD-A Enabling Switch (Three-position device. Top part with LEDs and no extra buttons. Bottom part with M12-8 connector and anti-tamper PCB.) ABB
2TLA019995R1400 JSHD4-3-AD Enabling Switch (Three-position device. Top part with LEDs and no extra buttons. Bottom part with M12-8 connector.) ABB
2TLA019995R1900 JSHD4-3-AG Enabling Switch (Three-position device. Top part with LEDs and no extra buttons. Bottom part with M12-5 connector and 1 AS-i node (without front and top button).) ABB
2TLA019995R1800 JSHD4-3-AF-A Enabling Switch (Three-position device. Top part with LEDs and no extra buttons. Bottom part with M12-5 connector and 2 AS-i nodes (for front and top button) and anti-tamper PCB.) ABB
2TLA019995R1700 JSHD4-3-AF Enabling Switch (Three-position device. Top part with LEDs and no extra buttons. Bottom part with M12-5 connector and 2 AS-i nodes (for front and top button).) ABB
2TLA019995R2200 JSHD4-3-AJ Enabling Switch (Three-position device. Top part with LEDs and no extra buttons. Bottom part with cable gland and PCB with 16 screw connections.) ABB
2TLA019995R2100 JSHD4-3-AH-A Enabling Switch (Three-position device. Top part with LEDs and no extra buttons. Bottom part with cable gland and PCB with 10 screw connection and anti-tamper PCB.) ABB
2TLA019995R2000 JSHD4-3-AH Enabling Switch (Three-position device. Top part with LEDs and no extra buttons. Bottom part with cable gland and PCB with 10 screw connections.) ABB
2TLA020072R0600 URAX-E1 (Safe input slave for AS-i bus for two-hand control devices according to EN 574 type IIIC.) ABB
2TLA020072R0500 URAX-D1R (Safe input slave for AS-i bus for devices with OSSD outputs + 3 non-safe outputs + input for local reset. Ex. of devices: Orion light guards. Black AS-i cable needed.') ABB
2TLA020072R0400 URAX-C1R (Safe input slave for AS-i bus for safety devices with two potential free contacts (NO+NO or NO+NC) + input for local reset. Ex. of devices: emergency stop buttons and safety switches.) ABB
2TLA020072R0000 URAX-A1 (Safe input slave for AS-i bus for DYNlink devices + 1 non-safe output. Ex. of devices: Eden DYN. Up to three devices in series.) ABB
2TLA020072R0300 URAX-C1 (Safe input slave for AS-i bus for safety devices with two potential free contacts, NO+NO or NO+NC, lile emergency stop buttons and safety switches. Ex. of devices: Smile and Mkey.) ABB
2TLA020072R0200 URAX-B1R (Safe input slave for AS-i bus for DYNlink devices+ 3 non-safe outputs + input for local reset. Ex. of devices: Magne, Knox and Dalton. Up to 10 devices in series. Black AS-i cable needed.) ABB
2TLA020072R0100 URAX-A1R (Safe input slave for AS-i bus for DYNlink devices + 1 non-safe output + input for local reset. Ex. of devices: Eden DYN. Up to 3 devices in series.) ABB
2TLA020057R0000 C5 cable 5x0.34mm2 shielded (Cable 5 x 0.34 mm2 + shield. Sold per meter, specify length.) ABB
2TLA020057R2000 C13 cable (11x0.51 + 2x0.82) shielded (Cable 11 x 0.51 mm2 + 2 x 0.82 mm2 + screen, specify length. Recommended to use with a Tina 8A.) ABB
2TLA020055R1100 M12-C02 M12-5 male screw connector (Straight M12-5 male connector with cable screw connection. Cable diameter range 2.5òÀÓ6.5 mm.) ABB
2TLA020057R1500 C9 cable 9-pole(7x0.51 + 2x0.82) shielded (Cable 7 x 0.51 mm2 + 2 x 0.82 mm2 + screen, specify length. Recommended to use with a Tina 4A.) ABB
2TLA020055R1000 M12-C01 M12-5 female screw connector (Straight M12-5 female connector with cable screw connection. Cable diameter range 2.5òÀÓ6.5 mm.) ABB
2TLA020055R0200 M12-3E M12 Y-connector (M12 Y-connector for the connection of 2 DYNlink devices or one DYNlink and one light button to Pluto safety PLC with only one cable. One M12-5 female connector (#2) for connection of the first circuit. One M12-5 female connector (#3) for connection of the second circuit. One M12-5 male connector (#1) for connection to IQs on the Pluto safety PLC.) ABB
2TLA020055R0300 M12-3D M12 Y-connector (M12 Y-connector for easier installation of a light guard with transmitter and receiver. One M12-8 female connector for the receiver (#2), one M12-5 female connector for the transmitter (#3) and one M12-8 male connector (#1) for cabling to safety control unit.) ABB
2TLA020056R1000 M12-C101 10m cable M12-5 female conn. (10 m cable 5 x 0.34 mm2 + shield with straight M12-5 female connector.) ABB
2TLA020055R1700 M12-C04 M12-8 male screw connector (Straight M12-8 male connector with cable screw connection. Cable diameter range 2.5òÀÓ6.5 mm.) ABB
2TLA020055R1600 M12-C03 M12-8 female screw connector (Straight M12-8 female connector with cable screw connection. Cable diameter range 2.5òÀÓ6.5 mm.) ABB
2TLA020055R0100 M12-3B M12 Y-connector (M12 Y-connector for parallel connection of 2 DYNlink devices such as Eden sensors, Spot singel beams and Tina adapters. Two M12-5 female connectors (#2, #3) for connection of the safety devices and one M12-5 male connector (#1) for connection towards the DYNlink loop.) ABB
2TLA020055R0000 M12-3A M12 Y-connector (M12 Y-connector for series connection of DYNlink devices such as Eden sensors, Smile Tina and Inca Tina emergency stop buttons, Spot single beam, and Tina adapters. One M12-5 pole female connector (#2) for connection of the safety device, one M12-5 male connector (#1) for connection of +24VDC, 0V and the incoming dynamic signal and one M12-5 female connector (#3) for continuation of the circuit towards another safety device or Vital/Pluto safety PLC.) ABB
2TLA020055R2100 M12 protection cap for male connector (Protection of the M12 male connector from dust.) ABB
2TLA010002R0200 JSBR4 24AC Safety relay (Safety relay for two hand device and many other safety products. Power supply 24VAC. Relay outputs 3NO/1NC) ABB
2TLA010002R0500 JSBR4 230AC Safety relay (Safety relay for two hand device and many other safety products. Relay outputs 3NO/1NC) ABB
2TLA010002R0400 JSBR4 115AC Safety relay (Safety relay for two hand device and many other safety products. Relay outputs 3NO/1NC) ABB
2TLA010025R0500 JSBRT11 230AC safety relay (Safety relay with many outputs. Power supply 230VAC. Relay outputs 7NO/2NC) ABB
2TLA010025R0400 JSBRT11 115AC Safety relay (Safety relay with many outputs. Power supply 115 VAC. Relay outputs 7NO/2NC) ABB
2TLA010002R0000 JSBR4 24DC Safety relay (Safety relay for two hand device and many other safety products. Power supply 24VDC. Relay outputs 3NO/1NC) ABB
2TLA010033R3000 BT51T 24DC Safety relay (Safety relay/expansion relay. Time delay 0-1.5 sec. Relay outputs 4NO) ABB
2TLA010033R2000 BT51 24DC Safety relay (Safety relay/expansion relay. Relay outputs 4NO) ABB
2TLA010005R0700 JSBT5 12VDC Safety relay (Single channel and "dual" channel safety relay. Power supply 12VDC. Relay outputs 3NO/1NC) ABB
2TLA010004R0000 JSBT4 24DC Safety relay (Safety relay with synchronised dual input channels Relay outputs 3NO/1NC) ABB
2TLA010025R0000 JSBRT11 24DC Safety relay (Safety relay with many outputs. Power supply 24VDC. Relay outputs 7NO/2NC) ABB
2TLA010005R1100 JSBT5T 24AC/DC Safety relay (Single channel and "dual" channel safety relay. Power supply 24VAC/VDC. Relay outputs 3NO/1NC) ABB
2TLA010005R0100 JSBT5 24AC/DC Safety relay (Single channel and "dual" channel safety relay. Power supply 24VAC/VDC. Relay outputs 3NO/1NC) ABB
2TLA010012R1000 JSHT2B 24DC Time module (Safety timer for time bypassing and inching. Hardwired time selection 5-20 sec. Relay outputs 1NO+1NO) ABB
2TLA010012R0000 JSHT2A 24DC Time module (Safety timer for time bypassing and inching. Hardwired time selection 0.2-1 sec. Relay outputs 1NO+1NO) ABB
2TLA010011R1000 JSHT1B 24DC Time module (Safety timer for time reset and time bypassing. Hardwired time selection 5-40 sec. Relay outputs 1NO+1NO) ABB
2TLA010011R0000 JSHT1A 24DC Time module (Safety timer for time reset and time bypassing. Hardwired time selection 5-20 sec. Relay outputs 1NO+1NO) ABB
2TLA010012R2000 JSHT2C 24DC Time module (Safety timer for time bypassing and inching. Hardwired time selection 5-40 sec. Relay Outputs 1NO+1NO) ABB
2TLA010033R1000 BT50T 24DC Safety relay (Safety relay/expansion relay. Time delay 0-1.5 sec. Relay outputs 3NO/1NC) ABB
2TLA010033R0000 BT50 24DC Safety relay (Safety relay/expansion relay. Relay outputs 3NO/1NC) ABB
2TLA010027R0100 JSR2A 24AC/DC Expansion relay (Expansion relay for more outputs. Higher switching capacity. Up to 10 amps per output. Relay outputs 3NO/1NC) ABB
2TLA010017R0100 JSR3T 24AC/DC Expansion relay (Safety expansion relay for safety relays. Hardwire Selectable Delay 0.5 - 10.0 sec. Relay Outputs 1NO+1NO) ABB
2TLA010028R2500 RT7A 1.5s 230AC Safety relay (A universal safety relay for many safety applications. 2 delayed outputs of 1.5 sec. Relay outputs 2NO/2NO/1NC) ABB
2TLA010028R2400 RT7A 1.5s 115AC Safety relay (A universal safety relay for many safety applications. 2 delayed outputs of 1.5 sec. Relay outputs 2NO/2NO/1NC) ABB
2TLA010026R0000 RT6 24DC Safety relay (A universal safety relay for many safety applications. Relay outputs 3NO/1NC) ABB
2TLA010026R0200 RT6 24AC Safety relay (A universal safety relay for many safety applications. Relay outputs 3NO/1NC) ABB
2TLA010026R0500 RT6 230AC Safety relay (A universal safety relay for many safety applications. Relay outputs 3NO/1NC) ABB
2TLA010026R0400 RT6 115AC Safety relay (A universal safety relay for many safety applications. Relay outputs 3NO/1NC) ABB
2TLA010030R5000 E1T 3s 24DC Expansion relay (Safety expansion relay - for expanding the outputs of safety relays. Time delay 3 sec. Relay outputs 4NO) ABB
2TLA010030R4000 E1T 2s 24DC Expansion relay (Safety expansion relay - for expanding the outputs of safety relays. Time delay 2 sec. Relay outputs 4NO) ABB
2TLA010030R2000 E1T 1s 24DC Expansion relay (Safety expansion relay - for expanding the outputs of safety relays. Time delay 1 sec. Relay outputs 4NO) ABB
2TLA010030R3000 E1T 1.5s 24DC Expansion relay (Safety expansion relay - for expanding the outputs of safety relays. Time delay 1.5 sec. Relay outputs 4NO) ABB
2TLA010030R0000 E1T 0s 24DC Expansion relay (Safety expansion relay - for expanding the outputs of safety relays. Time delay 0 sec. Relay outputs 4NO) ABB
2TLA010030R1000 E1T 0.5s 24DC Expansion relay (Safety expansion relay - for expanding the outputs of safety relays. Time delay 0.5 sec. Relay outputs 4NO) ABB
2TLA022090R1000 JSM 66 Bracket with screws for Alu. Profile (JSM 66 Bracket 2.5 mm RF A2 painted black including, 2pc allen screw M6x12, 2pc T-nut M6 and 2pc washers.) ABB
2TLA040007R1500 ML1 Light bulb 24V 5W (Light bulb 24V, 5W BA15d style bulb. For example FMI-1B) ABB
2TLA020073R0100 JSAUR1 M12 plug (M12 plug needed when a Urax with local reset possibility (URAX-x1R) is used in automatic reset.) ABB
2TLA020072R9900 URAX Bottom plate ABB
72649 JSM D25 Bracket for URAX (Bracket for mounting Urax on ABB Jokab Safety fence system. Includes fasteners.) ABB

Òîâàðû 1 - 465 èç 465
 Íà÷àëî | Ïðåä. | 1 | Ñëåä. | Êîíåö | Ïî ñòð.