Catalogs > Safety Products Catalog > Safety Switches > Interlock Switches > Tongue Interlock Switches > MT-GD2
MT-GD2
Introduction | Specifications | Product Selection | Accessories | Approximate Dimensions | Typical Wiring Diagrams |
Safety Ratings | |||||
Standards | EN954-1, ISO13849-1, IEC/EN60204-1, NFPA79, EN1088, ISO14119, IEC/ EN60947-5-1, ANSI B11.19, AS4024.1 | ||||
Safety Classification | Cat. 1 device per EN 954-1 dual channel interlocks suitable for Cat. 3 or 4 systems | ||||
Functional Safety Data ⋆ Note: For up-to-date information, visit http://www.ab.com/Safety/ |
B10d: > 2 x 106 operations at min. load PFHD: > 3 x10-7 MTTFd: > 385 years Dual channel interlock may be suitable for performance levels Ple or Pld (according to ISO 13849-1:2006) and for use in SIL2 or SIL3 systems (according to IEC 62061) depending on application characteristics |
||||
Certifications | CE Marked for all applicable directives, cULus, TÜV, and CCC | ||||
Outputs | |||||
Safety Contacts | Standard: 3 N.C. or 2 N.C. direct opening action Snap acting: 2 N.C. direct opening forced disconnection |
||||
Auxiliary Contacts | Standard: 1 N.O. or 2 N.O. Snap Acting: 2 N.O. |
||||
Thermal CurrentIlth | 10 A | ||||
Rated Insulation Voltage | (Ui) 500V | ||||
Switching Current @ Voltage, Min. | 5 mA @ 5V DC | ||||
Utilization Category | |||||
A600/AC-15 | (Ue) | 600V | 500V | 240V | 120V |
(le) | 1.2 A | 1.4 A | 3 A | 6 A | |
Standard—DC-13 | (Ue) | 24V | |||
(le) | 2 A | ||||
Snap-Acting—A300/AC-15 | (Ue) | 240V | 120V | ||
(le) | 3 A | 6 A | |||
Snap-Acting—DC-13 | (Ue) | 24V | |||
(le) | 2 A | ||||
Operating Characteristics | |||||
Break Contact Force, Min. | BBM & MBB: 12 N (2.7 lbf) BBM & Extended Flat Actuator: 32 N (7.2 lbf) Snap acting: 40 N (9.0 lbf) |
||||
Actuation Speed, Max. | 160 mm (6.29 in.)/s | ||||
Actuation Frequency, Max. | 2 cycles/s | ||||
Operating Life @ 100 mA load | 1 x 106 operations | ||||
Environmental | |||||
Enclosure Type Rating | IP67 | ||||
Operating Temperature [C (F)] | -20…+80° (-4…+176°) | ||||
Physical Characteristics | |||||
Housing Material | Painted zinc | ||||
Actuator Material | Stainless Steel | ||||
Weight [g (lb)] | 520 (1.15) | ||||
Color | Yellow or Red | ||||
⋆ Usable for ISO 13849-1:2006 and IEC 62061. Data other than B10d is based on: - Usage rate of 1op/10 mins., 24 hrs/day, 360 days/year, representing 51840 operations per year - Mission time/Proof test interval of 38 years The safety contacts are described as normally closed (N.C.) i.e., with the guard closed, actuator in place (where relevant) and the machine able to be started. |