General specifications |
Signal type | Digital Input |
Supply |
Connection | d14+, z14- |
Rated voltage | 20 ... 30 V DC |
Ripple | ≤ 10 % |
Power consumption | approx. 4 W |
Input |
Connection | channel 1: d2-, b2+ channel 2: d4-, b2+ channel 3: d6-, b4+ channel 4: d8-, b4+ channel 5: z2-, b6+ channel 6: z4-, b6+ channel 7: z6-, b8+ channel 8: z8-, b8+ |
Rated values | acc. to EN 60947-5-6 (NAMUR), see system description for electrical data |
Open circuit voltage/short-circuit current | approx. 7.5 V DC / approx. 7.5 mA |
Switching point/switching hysteresis | 1.2 ... 2.1 mA / approx. 0.2 mA |
Line fault detection | breakage I ≤ 0.15 mA , short-circuit I > 6 mA |
Pulse length/pulse interval | ≥ 1 ms / ≥ 1 ms |
Output |
Connection | channel 1: d22, d24 channel 2: d26, d28 channel 3: d30, d32 channel 4: b22, b24 channel 5: b26, b28 channel 6: b30, b32 channel 7: z22, z24 channel 8: z26, z28 |
Output | signal ; relay |
Contact loading | 60 V AC/1 A/60 VA; 60 V DC/1 A resistive load/24 W |
Energized/De-energized delay | 5 ms / 5 ms |
Mechanical life | 2 x 107 switching cycles |
Error message output |
Connection | z30, z32 |
Output | fault signal ; relay |
Contact loading | 60 V AC/1 A/60 VA; 60 V DC/1 A resistive load/24 W |
Energized/De-energized delay | 5 ms / 5 ms |
Mechanical life | 2 x 107 switching cycles |
Transfer characteristics |
Switching frequency | < 10 Hz |
Directive conformity |
Electromagnetic compatibility | |
| Directive 2004/108/EC | The device has been used for the same applications for several years. It therefore features an appropriate electromagnetic field immunity. The device must not be used in new plants. |
Low voltage | |
| Directive 2006/95/EC | EN 50178:1997 |
Conformity |
Insulation coordination | EN 50178 |
Protection degree | IEC 60529 |
Ambient conditions |
Ambient temperature | -20 ... 60 °C (-4 ... 140 °F) |
Mechanical specifications |
Protection degree | IP20 |
Connection | 48-pin plug connector acc. to DIN 41612 , series 2 , type F , z, b and d provided |
Mass | approx. 175 g |
Dimensions | 20 x 128 x 193 mm (0.8 x 5 x 7.6 in) |
Data for application in connection with Ex-areas |
EC-Type Examination Certificate | PTB 00 ATEX 2207 , for additional certificates see www.pepperl-fuchs.com |
| Group, category, type of protection | II (1)GD [EEx ia] IIC |
| Input | EEx ia IIC |
| Voltage Uo | 11.8 V |
| Current Io | 14.6 mA |
| Power Po | 43 mW (linear characteristic) |
Electrical isolation | |
| Input/Output | safe galvanic isolation acc. to EN 50020, voltage peak value 375 V |
| Input/power supply | safe galvanic isolation acc. to EN 50020, voltage peak value 375 V |
Directive conformity | |
| Directive 94/9/EC | EN 50014:1997, EN 50020:1994 |