yes , Reverse polarity protection diode not required
Current consumption
Measuring plate not detected
≥ 3 mA
Measuring plate detected
≤ 1 mA
Switching state indication
LED, yellow
Valve status indication
LED, yellow
Compliance with standards and directives
Standard conformity
NAMUR
EN 60947-5-6:2000
Electromagnetic compatibility
NE 21:2007
Ambient conditions
Ambient temperature
-25 ... 100 В°C (-13 ... 212 В°F)
Storage temperature
-40 ... 100 В°C (-40 ... 212 В°F)
Mechanical specifications
Connection (system side)
Cage tension spring terminals
Core cross-section (system side)
up to 2.5 mm2
Connection (valve side)
Cage tension spring terminals
Core cross-section (valve side)
up to 2.5 mm2
Housing material
PBT
Sensing face
PBT
ATEX 1G
Specific conditions
Lead insertion
The connection cables should either be fixed when laid and mechanically protected or installed in such a way, that a force of 30 N applied in the direction of the cable inlet for one hour, does not lead to any visible displacement of the cable connections, even though the cable sheathing is displaced, see also IEC 60079-11. Depending on the type of installation, a suitable cable in accordance with Type A oder B of IEC 60079-14, must be used.
ATEX 2G
Specific conditions
Lead insertion
The connection cables should either be fixed when laid and mechanically protected or installed in such a way, that a force of 30 N applied in the direction of the cable inlet for one hour, does not lead to any visible displacement of the cable connections, even though the cable sheathing is displaced, see also IEC 60079-11. Depending on the type of installation, a suitable cable in accordance with Type A oder B of IEC 60079-14, must be used.
